Superelastic Carbon Aerogel with Ultrahigh and Wide-Range Linear Sensitivity
The DOI matches its Crossref record.
Abstract
Compressible and elastic carbon materials offer many advantages and have promising applications in various electronic devices. However, fabricating carbon materials with super elasticity, fatigue resistance, and high and wide-range linear sensitivity for pressure or strain remains a great challenge. Herein, a facile and sustainable route is developed to fabricate a carbon aerogel with not only superior mechanical performances but also exceptionally high and wide-range linear sensitivity by using chitosan as a renewable carbon source and cellulose nanocrystal as a nanoreinforcement or support. The as-prepared carbon aerogel with wave-shaped layers shows high compressibility, super elasticity, stable strain–current response, and excellent fatigue resistance (94% height retention after 50 000 cycles). More importantly, it demonstrates both an ultrahigh sensitivity of 103.5 kPa –1 and a very wide linear range of 0–18 kPa. In addition, the carbon aerogel has a very low detection limit (1.0 Pa for pressure and 0.05% for strain). The carbon aerogel also can be bended to detect a small angle change. These superiorities render its applications in various wearable devices.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Current progress achieved in novel materials for supercapacitor electrodes: mini review
Najib, S., & Erdem, E. (2019) · Nanoscale Advances · doi:10.1039/c9na00345b · Cited by 922
Cellulose‐Based Flexible Functional Materials for Emerging Intelligent Electronics
Zhao, D., Zhu, Y., Cheng, W., Chen, W., Wu, Y., & Yu, H. (2021) · Advanced Materials · doi:10.1002/adma.202000619 · Cited by 842
Liu, H., Li, Q., Bu, Y., Zhang, N., Wang, C., Pan, C., Mi, L., Guo, Z., Liu, C., & Shen, C. (2019) · Nano Energy · doi:10.1016/j.nanoen.2019.104143 · Cited by 333
Self-citationBu, Y., Shen, T., Yang, W., Yang, S., Zhao, Y., Liu, H., Zheng, Y., Liu, C., & Shen, C. (2021) · Science Bulletin · doi:10.1016/j.scib.2021.04.041 · Cited by 291
Self-citationDe France, K., Zeng, Z., Wu, T., & Nyström, G. (2021) · Advanced Materials · doi:10.1002/adma.202000657 · Cited by 289
A Review of Supercapacitors: Materials Design, Modification, and Applications
Yaseen, M., Khattak, M. A. K., Humayun, M., Usman, M., Shah, S. S., Bibi, S., Hasnain, B. S. U., Ahmad, S. M., Khan, A., Shah, N., et al. (2021) · Energies · doi:10.3390/en14227779 · Cited by 277
Pan, W., Liang, C., Sui, Y., Wang, J., Liu, P., Zou, P., Guo, Z., Wang, F., Ren, X., & Yang, C. (2022) · Advanced Functional Materials · doi:10.1002/adfm.202204166 · Cited by 51
Three dimensional carbon aerogel for microwave absorption from chitosan
Xu, J. (2023) · Synthetic Metals · doi:10.1016/j.synthmet.2023.117352 · Cited by 21
Light-induced levitation of ultralight carbon aerogels via temperature control
Yanagi, R., Takemoto, R., Ono, K., & Ueno, T. (2021) · Scientific Reports · doi:10.1038/s41598-021-91918-5 · Cited by 8
Metadata
- Authors
- Hu, Y., Zhuo, H., Chen, Z., Wu, K., Luo, Q., Liu, Q., Jing, S., Liu, C., Zhong, L., Sun, R., & Peng, X.
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2018-10-31
- Volume
- 10
- Issue
- 47
- Pages
- 40641-40650
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W2899200137
- Cited by
- 76
- References
- 0
- FWCI
- 3.68
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.