The DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Melamine Foam-Supported Form-Stable Phase Change Materials with Simultaneous Thermal Energy Storage and Shape Memory Properties for Thermal Management of Electronic Devices
Abstract
Paraffin wax (PW) is widely used as a phase change material (PCM) in the thermal energy storage field, whereas the leakage and strong rigidity of PW have hindered its practical applications. In this work, binary melamine foam (MF)/PW blends with simultaneous thermal energy storage and shape memory properties were prepared through vacuum impregnation. Herein, PW performs as a latent heat storage material and as a switching phase for shape fixation and MF serves as a supporting material to prevent the leakage and as a permanent phase for shape recovery. Due to the light weight and super-elasticity of MF, the MF/PW PCMs possess not only good encapsulation ability and a high latent heat, but also excellent shape-fixing and recovery properties (shape-fixing and recovery ratios are about 100%). Besides, the MF/PW PCMs can be fabricated into arbitrary shapes using MF as a template, and they exhibit excellent shape memory cyclic performance and thermal reliability. A temperature-sensitive and temperature-controlled deployable panel is further established, which can be installed in the electronic device and used for temperature protection. With high thermal energy storage capability, excellent shape memory properties, shape designability, and stable cycling reliability, this multifunctional MF/PW PCM shows a promising application in thermal energy management systems.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Review of progress in shape-memory polymers
Liu, C., Qin, H., & Mather, P. T. (2007) · Journal of Materials Chemistry · doi:10.1039/b615954k · Cited by 1,942
Hu, J., Zhu, Y., Huang, H., & Lu, J. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2012.06.001 · Cited by 1,279
Huang, X., Chen, X., Li, A., Atinafu, D., Gao, H., Dong, W., & Wang, G. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.09.013 · Cited by 701
Gao, H., Wang, J., Chen, X., Wang, G., Huang, X., Li, A., & Dong, W. (2018) · Nano Energy · doi:10.1016/j.nanoen.2018.09.007 · Cited by 391
Wei, X., Xue, F., Qi, X.-D., Yang, J.-H., Zhou, Z.-W., Yuan, Y.-P., & Wang, Y. (2019) · Applied Energy · doi:10.1016/j.apenergy.2018.11.091 · Cited by 133
Self-citation
Cited by
Chen, X., Gao, H., Tang, Z., Dong, W., Li, A., & Wang, G. (2020) · Energy & Environmental Science · doi:10.1039/d0ee01355b · Cited by 348
Flexible phase change materials for thermal energy storage
Shi, J., Qin, M., Aftab, W., & Zou, R. (2021) · Energy Storage Materials · doi:10.1016/j.ensm.2021.05.048 · Cited by 309
Flexible monolithic phase change material based on carbon nanotubes/chitosan/poly(vinyl alcohol)
Cheng, P., Gao, H., Chen, X., Chen, Y., Han, M., Xing, L., Liu, P., & Wang, G. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.125330 · Cited by 160
Metadata
- Authors
- Jing, J.-H., Wu, H.-Y., Shao, Y.-W., Qi, X.-D., Yang, J.-H., & Wang, Y.
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2019-05-09
- Volume
- 11
- Issue
- 21
- Pages
- 19252-19259
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W2944524173
- Cited by
- 167
- References
- 5
- FWCI
- 12.42
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.