The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Carbon Black Oxidized by Air Calcination for Enhanced H2O2 Generation and Effective Organics Degradation
Abstract
Carbon black (CB) has a high conductivity and a large surface area, which are the basis of an excellent electrocatalyst. However, CB itself is usually less active or even inactive toward two-electron oxygen reduction reaction (2e – ORR) due to the absence of highly active functional groups with low oxygen content. To activate commercial CB for 2e – ORR, oxygen-containing functional groups were introduced onto the CB surface by a simple air calcination method. After the oxidation treatment at 600 °C (CB600), the oxygen content increased from the initial 1.17 ± 0.15 to 4.08 ± 0.60%, leading to a dramatic increase of the cathodic current from only −8.1 mA (CB) to −117.6 mA (CB600). The air cathode made of CB600 achieved the maximum H 2 O 2 production of 517.7 ± 2.4 mg L –1 within 30 min, resulting in the removal of ∼91.1% rhodamine B in 2 min and an effective mineralization of ∼76.3% in an electro-Fenton reactor. This performance was much better than that obtained using the CB catalyst (65.3 ± 5.6 mg L –1 H 2 O 2 production, and ∼20.3% mineralization). This excellent activity of CB600 toward 2e – ORR was greatly improved by the introduction of O═C–OH and C–O–C groups. The successful improvement of the 2e – ORR activity of CB using air calcination enables its practical application in electrochemical advanced oxidation processes.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Electro-Fenton Process and Related Electrochemical Technologies Based on Fenton’s Reaction Chemistry
Brillas, E., Sirés, I., & Oturan, M. A. (2009) · Chemical Reviews · doi:10.1021/cr900136g · Cited by 3,437
Novel catalyst support materials for PEMfuelcells: current status and future prospects
Shao, Y., Liu, J., Wang, Y., & Lin, Y. (2009) · J. Mater. Chem. · doi:10.1039/b808370c · Cited by 660
Cited by
Wang, N., Ma, S., Zuo, P., Duan, J., & Hou, B. (2021) · Advanced Science · doi:10.1002/advs.202100076 · Cited by 462
Martínez-Huitle, C. A., Rodrigo, M. A., Sirés, I., & Scialdone, O. (2023) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2023.122430 · Cited by 446
Metadata
- Authors
- Zhang, H., Li, Y., Zhao, Y., Li, G., & Zhang, F.
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2019-07-11
- Volume
- 11
- Issue
- 31
- Pages
- 27846-27853
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W2958967991
- Cited by
- 169
- References
- 2
- FWCI
- 5.63
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.