The DOI matches its Crossref record.
Polyoxyethylene (PEO)|PEO–Perovskite|PEO Composite Electrolyte for All-Solid-State Lithium Metal Batteries
Abstract
Composite solid electrolytes (CSEs) are regarded as one of the most promising candidates for all-solid-state lithium metal batteries (ASSLMBs) due to inherited desirable features from both ceramic and polymer materials. However, poor interfacial contact/compatibility between the electrodes and solid electrolytes remains a critical challenge. In this work, we prepare a flexible CSE composed of polyoxyethylene (PEO)–perovskite composite with a layer of PEO on either side. This PEO|PEO–perovskite|PEO structure prevents direct contact between the perovskite and lithium metal at the anode side, avoiding the undesired reaction between the two materials (Ti 4+ + Li → Ti 3+ + Li + ). Moreover, the design incorporating the PEO surface on either side enables superb contact between the electrolyte and the electrodes and buffers the change in electrolyte volume from the cathode and lithium metal during repeated cycling, resulting in low interfacial resistances and excellent cycling stability. Meanwhile, perovskite inorganic electrolyte Li 0.33 La 0.557 TiO 3 (LLTO) 3D nanofiber networks formed by electrospinning enable the CSE to achieve enhanced mechanical strength and high ionic conductivity of 0.16 mS cm –1 at 24 °C. As a result, a Li | PEO–LiTFSI–LLTO | Li symmetric cell remains stable after 400 h of operation without short-circuiting. Most notably, a Li | PEO–LiTFSI–LLTO | LiFePO 4 full battery is capable of delivering a high capacity of 135.0 mAh g –1 even at 2 C with a retention rate of 79.0% after 300 cycles at 60 °C. These results demonstrate that the integrated sandwich structure proposed in this work is effective in developing high-performance composite solid electrolytes for ASSLMBs.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Tailoring inorganic–polymer composites for the mass production of solid-state batteries
Fan, L.-Z., He, H., & Nan, C.-W. (2021) · Nature Reviews Materials · doi:10.1038/s41578-021-00320-0 · Cited by 1,034
Wang, H., Sheng, L., Yasin, G., Wang, L., Xu, H., & He, X. (2020) · Energy Storage Materials · doi:10.1016/j.ensm.2020.08.014 · Cited by 410
Sulfide and Oxide Inorganic Solid Electrolytes for All-Solid-State Li Batteries: A Review
Reddy, M. V., Julien, C. M., Mauger, A., & Zaghib, K. (2020) · Nanomaterials · doi:10.3390/nano10081606 · Cited by 331
Boaretto, N., Garbayo, I., Valiyaveettil-SobhanRaj, S., Quintela, A., Li, C., Casas-Cabanas, M., & Aguesse, F. (2021) · Journal of Power Sources · doi:10.1016/j.jpowsour.2021.229919 · Cited by 271
Chen, T.-W., Ramachandran, R., Chen, S.-M., Kavitha, N., Dinakaran, K., Kannan, R., Anushya, G., Bhuvana, N., Jeyapragasam, T., Mariyappan, V., et al. (2020) · Catalysts · doi:10.3390/catal10080938 · Cited by 49
“0 mAh g−1 with reasonable cyclic stability of 300 cycles (Figure 4) [64].”
BackgroundPeng, M., Zhang, F., Tian, L., You, L., Wu, J., Wen, N., Zhang, Y., Wu, Y., Gan, F., Yu, H., et al. (2022) · Polymers · doi:10.3390/polym14204354 · Cited by 8
Metadata
- Authors
- Liu, K., Zhang, R., Sun, J., Wu, M., & Zhao, T.
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2019-11-25
- Volume
- 11
- Issue
- 50
- Pages
- 46930-46937
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W2991149297
- Cited by
- 183
- References
- 0
- FWCI
- 5.99
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.