The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Ultrahigh Performance of n-Type Ag2Se Films for Flexible Thermoelectric Power Generators
Abstract
Due to the limited thermoelectric (TE) performance of conducting polymers and rigidity of inorganic materials, it is still a huge challenge to prepare low-cost, highly flexible, and high-performance TE materials. Herein, we fabricated n-type Ag 2 Se films using a porous nylon membrane as a flexible substrate by vacuum-assisted filtration, followed by hot pressing. A very high power factor of ∼1882 μW m –1 K –2 at room temperature is obtained. The high power factor is mainly the result of the high density of the Ag 2 Se film and the tuned grain orientation, which is realized by the synthesis of multisized Ag 2 Se nanostructures. The film also exhibits excellent flexibility with 90.7% retention of the power factor after bending around a rod of 4 mm radius for 1000 times. A four-leg TE generator is assembled with the Ag 2 Se film, and its maximum output power is up to 3.2 μW at a temperature difference of 30 K, corresponding to the maximum power density of 22.0 W m –2 and a normalized maximum power density of 408 μW m –1 K –2 . This work provides an effective route to achieve high-power-factor, high-flexibility, and low-cost TE films.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Oh, J. Y., Lee, J. H., Han, S. W., Chae, S. S., Bae, E. J., Kang, Y. H., Choi, W. J., Cho, S. Y., Lee, J.-O., Baik, H. K., et al. (2016) · Energy & Environmental Science · doi:10.1039/c5ee03813h · Cited by 289
Cited by
Advanced Thermoelectric Design: From Materials and Structures to Devices
Shi, X.-L., Zou, J., & Chen, Z.-G. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00026 · Cited by 2,524
Flexible thermoelectric materials and devices: From materials to applications
Zhang, L., Shi, X.-L., Yang, Y.-L., & Chen, Z.-G. (2021) · Materials Today · doi:10.1016/j.mattod.2021.02.016 · Cited by 454
Advances in the design and assembly of flexible thermoelectric device
Cao, T., Shi, X.-L., & Chen, Z.-G. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2022.101003 · Cited by 387
Power generation for wearable systems
Gao, M., Wang, P., Jiang, L., Wang, B., Yao, Y., Liu, S., Chu, D., Cheng, W., & Lu, Y. (2021) · Energy & Environmental Science · doi:10.1039/d0ee03911j · Cited by 343
Self-citation
Metadata
- Authors
- Jiang, C., Ding, Y., Cai, K., Tong, L., Lu, Y., Zhao, W., & Wei, P.
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2020-02-03
- Volume
- 12
- Issue
- 8
- Pages
- 9646-9655
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W3004579401
- Cited by
- 195
- References
- 1
- FWCI
- 10.07
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.