The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
CuO Nanoparticles/Ti3C2Tx MXene Hybrid Nanocomposites for Detection of Toluene Gas
Abstract
Toluene is one of the harmful volatile organic compounds (VOCs) for both human health and environments. Thus, to prevent the hazardous effect of toluene, fast detection at an early stage is needed. CuO shows the merit for a wide range responsivity to VOCs but suffers from small response value, slow response/recovery speeds, and low durability. Herein, we report a facile preparation of CuO/Ti 3 C 2 T x MXene hybrids via electrostatic self-assembly. The CuO nanoparticles (∼7 nm) were uniformly dispersed on the surface and the interlayers of the Ti 3 C 2 T x MXene, forming hybrid heterostructures. The CuO/Ti 3 C 2 T x MXene exhibited the improved toluene gas sensing response ( R g / R a ) of 11.4, which is nearly 5 times higher than that of the pristine CuO nanoparticles (2.3) to 50 ppm of toluene at 250 °C. Due to the different work function (Φ), the Schottky junction was established at the interface of CuO/Ti 3 C 2 T x MXene, acting as a hole trapping region (HTR) at the Ti 3 C 2 T x MXene side. Compared to other hybrid 2D materials such as MoS 2 and rGO, which possess a higher work function, the CuO/Ti 3 C 2 T x MXene maintained better toluene sensing performance. Thus, the work function is critical for designing a high sensing performance of hybrid metal oxides/2D materials. The hybridization of CuO with Ti 3 C 2 T x MXene improved not only enhancement of the response time but also the selectivity and the responses (270 s) and recovery times (10 s) compared with those of CuO, due to high conductivity of the metallic phase in Ti 3 C 2 T x MXene. Such excellent performance showed the promising applications of metal oxides/2D hybrid materials for VOCs gas sensing.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Metallic Ti3C2T x MXene Gas Sensors with Ultrahigh Signal-to-Noise Ratio
Kim, S. J., Koh, H.-J., Ren, C. E., Kwon, O., Maleski, K., Cho, S.-Y., Anasori, B., Kim, C.-K., Choi, Y.-K., Kim, J., et al. (2018) · ACS Nano · doi:10.1021/acsnano.7b07460 · Cited by 1,699
Cited by
Chaudhary, V., Kaushik, A., Furukawa, H., & Khosla, A. (2022) · ECS Sensors Plus · doi:10.1149/2754-2726/ac5ac6 · Cited by 386
Chemiresistive Hydrogen Sensors: Fundamentals, Recent Advances, and Challenges
Koo, W.-T., Cho, H.-J., Kim, D.-H., Kim, Y. H., Shin, H., Penner, R. M., & Kim, I.-D. (2020) · ACS Nano · doi:10.1021/acsnano.0c05307 · Cited by 379
Gas sensing performance of 2D nanomaterials/metal oxide nanocomposites: a review
Bhati, V. S., Kumar, M., & Banerjee, R. (2021) · Journal of Materials Chemistry C · doi:10.1039/d1tc01857d · Cited by 256
Li, T., Yin, W., Gao, S., Sun, Y., Xu, P., Wu, S., Kong, H., Yang, G., & Wei, G. (2022) · Nanomaterials · doi:10.3390/nano12060982 · Cited by 222
Flexible MXene/rGO/CuO hybrid aerogels for high performance acetone sensing at room temperature
Liu, M., Wang, Z., Song, P., Yang, Z., & Wang, Q. (2021) · Sensors and Actuators B: Chemical · doi:10.1016/j.snb.2021.129946 · Cited by 222
Metadata
- Authors
- Hermawan, A., Zhang, B., Taufik, A., Asakura, Y., Hasegawa, T., Zhu, J., Shi, P., & Yin, S.
- Venue
- ACS Applied Nano Materials
- Publisher
- American Chemical Society (ACS)
- Published
- 2020-04-23
- Volume
- 3
- Issue
- 5
- Pages
- 4755-4766
- ISSN
- 2574-0970 (ISSN-L)
- OpenAlex
- W3019732148
- Cited by
- 296
- References
- 1
- FWCI
- 12.07
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: CuO Nanoparticles/Ti3C2Tx MXene Hybrid Nanocomposites for Detection of Toluene Gas. https://app.cochat.ai/papers/10.1021/acsanm.0c00749
- The paper
- Hermawan, A., Zhang, B., Taufik, A., Asakura, Y., Hasegawa, T., Zhu, J., Shi, P., & Yin, S. (2020). CuO Nanoparticles/Ti3C2Tx MXene Hybrid Nanocomposites for Detection of Toluene Gas. ACS Applied Nano Materials. https://doi.org/10.1021/acsanm.0c00749
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.