CoChat

Mechanistic Investigation of Isopropanol Conversion on Alumina Catalysts: Location of Active Sites for Alkene/Ether Production

Larmier, Kim, Chizallet, Céline, Cadran, Nicolas, Maury, Sylvie, Abboud, Johnny, Lamic-Humblot, Anne-Félicie, Marceau, Eric, Lauron-Pernot, Hélène · 2015 · ACS Catalysis
Cited by 135

The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.

Abstract

Alcohol dehydration is of prominent relevance in the context of biomass conversion. This reaction can be efficiently catalyzed by alumina surfaces, but the nature of active sites, the mechanisms involved, and the key parameters to tune both the activity and the alkene/ether selectivity remain a matter of debate. In the present paper, isopropanol dehydration to propene and diisopropylether over γ-alumina, δ-alumina, and sodium-poisoned γ-alumina was investigated through a combined experimental and theoretical study. The experimental kinetic study shows that dehydration occurs following the same reaction mechanism on all materials, although γ-alumina activated above 450 °C exhibits the highest density of active sites and the highest global activity. Results suggest that all the reaction pathways involved in dehydration require the same set of adjacent active sites located on the (100) facets of γ-alumina. DFT transition-state calculations of the formation of propene and diisopropylether on the main terminations of alumina, (110) and (100), were also performed. The less activated pathways for both the formation of the olefin (E2 mechanism) and the formation of the ether (S N 2 mechanism) were found on a Al V Lewis acidic site of the (100) termination, with calculated activation enthalpies (125 and 112 kJ·mol –1 for propene and diisopropylether formation, respectively) in good agreement with the experimental values (128 and 118 kJ·mol –1, respectively). The higher or lesser selectivity toward propene or ether appears to originate from significantly different activation entropies. The effect of coadsorbed sodium on the reaction is linked to the poisoning of Al sites by neighboring, Na-stabilized OH groups, but no influence of sodium on distant sites is evidenced. Reaction temperature is identified as the main key parameter to tune alkene/ether selectivity rather than morphology effects, which in turn affect drastically the number of available active sites, and thus catalytic activity.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1021/acscatal.5b00723

Cites

3 of 3 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Cited by

See all 135

Metadata

Authors
Larmier, K., Chizallet, C., Cadran, N., Maury, S., Abboud, J., Lamic-Humblot, A.-F., Marceau, E., & Lauron-Pernot, H.
Venue
ACS Catalysis
Published
2015-06-22
Volume
5
Issue
7
Pages
4423-4437
ISSN
2155-5435 (ISSN-L)
OpenAlex
W2509831478
Cited by
135
References
3
FWCI
6.29
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.