The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Mechanisms for High Selectivity in the Hydrodeoxygenation of 5-Hydroxymethylfurfural over PtCo Nanocrystals
Abstract
Carbon-supported, Pt and PtCo nanocrystals (NCs) with controlled size and composition were synthesized and examined for hydrodeoxygenation (HDO) of 5-hydroxymethylfurfural (HMF). Experiments in a continuous flow reactor with 1-propanol solvent, at 120 to 160 °C and 33 bar H 2, demonstrated that reaction is sequential on both Pt and PtCo alloys, with 2,5-dimethylfuran (DMF) formed as an intermediate product. However, the reaction of DMF is greatly suppressed on the alloys, such that a Pt 3 Co 2 catalyst achieved DMF yields as high as 98%. XRD and XAS data indicate that the Pt 3 Co 2 catalyst consists of a Pt-rich core and a Co oxide surface monolayer whose structure differs substantially from that of bulk Co oxide. Density functional theory (DFT) calculations reveal that the oxide monolayer interacts weakly with the furan ring to prevent side reactions, including overhydrogenation and ring opening, while providing sites for effective HDO to the desired product, DMF. We demonstrate that control over metal nanoparticle size and composition, along with operating conditions, is crucial to achieving good performance and stability. Implications of this mechanism for other reactions and catalysts are discussed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Wang, D., Xin, H. L., Hovden, R., Wang, H., Yu, Y., Muller, D. A., DiSalvo, F. J., & Abruña, H. D. (2013) · Nature Materials · doi:10.1038/nmat3458 · Cited by 2,082
FIEVET, F., LAGIER, J., BLIN, B., BEAUDOIN, B., & FIGLARZ, M. (1989) · Solid State Ionics · doi:10.1016/0167-2738(89)90222-1 · Cited by 840
Cited by
Xu, C., Paone, E., Rodríguez-Padrón, D., Luque, R., & Mauriello, F. (2020) · Chemical Society Reviews · doi:10.1039/d0cs00041h · Cited by 1,042
Chen, S., Wojcieszak, R., Dumeignil, F., Marceau, E., & Royer, S. (2018) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00134 · Cited by 979
Continuous Flow Upgrading of Selected C2–C6Platform Chemicals Derived from Biomass
Gérardy, R., Debecker, D. P., Estager, J., Luis, P., & Monbaliu, J.-C. M. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00846 · Cited by 398
Catalytic conversion of 5-hydroxymethylfurfural to some value-added derivatives
Kong, X., Zhu, Y., Fang, Z., Kozinski, J. A., Butler, I. S., Xu, L., Song, H., & Wei, X. (2018) · Green Chemistry · doi:10.1039/c8gc00234g · Cited by 306
Emerging heterogeneous catalysts for biomass conversion: studies of the reaction mechanism
Lin, L., Han, X., Han, B., & Yang, S. (2021) · Chemical Society Reviews · doi:10.1039/d1cs00039j · Cited by 269
Metadata
- Authors
- Luo, J., Yun, H., Mironenko, A. V., Goulas, K., Lee, J. D., Monai, M., Wang, C., Vorotnikov, V., Murray, C. B., Vlachos, D. G., Fornasiero, P., & Gorte, R. J.
- Venue
- ACS Catalysis
- Publisher
- American Chemical Society (ACS)
- Published
- 2016-05-31
- Volume
- 6
- Issue
- 7
- Pages
- 4095-4104
- ISSN
- 2155-5435 (ISSN-L)
- OpenAlex
- W2400011647
- Cited by
- 164
- References
- 2
- FWCI
- 8.51
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Mechanisms for High Selectivity in the Hydrodeoxygenation of 5-Hydroxymethylfurfural over PtCo Nanocrystals. https://app.cochat.ai/papers/10.1021/acscatal.6b00750
- The paper
- Luo, J., Yun, H., Mironenko, A. V., Goulas, K., Lee, J. D., Monai, M., Wang, C., Vorotnikov, V., Murray, C. B., Vlachos, D. G., Fornasiero, P., & Gorte, R. J. (2016). Mechanisms for High Selectivity in the Hydrodeoxygenation of 5-Hydroxymethylfurfural over PtCo Nanocrystals. ACS Catalysis. https://doi.org/10.1021/acscatal.6b00750
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.