The DOI matches its Crossref record; 34 of the 34 references it cites were found in a registry or an index.
Optoelectronic Properties of (CH3NH3)3Sb2I9 Thin Films for Photovoltaic Applications
Abstract
We present solution-based fabrication and characterization of the lead-free perovskite-related methylammonium antimony iodide (CH 3 NH 3 ) 3 Sb 2 I 9 compound. By photothermal deflection spectroscopy (PDS), we determined a peak absorption coefficient α ≈ 10 5 cm –1 and an optical band gap of 2.14 eV for amorphous films of (CH 3 NH 3 ) 3 Sb 2 I 9 . Compared to the related Bi compound, the Sb-perovskite shows no exciton peak in its absorption spectrum. The photoluminescence emission (PL) is observed at 1.58 eV, and the Urbach tail energy of this amorphous compound is E u = 62 meV, indicating a substantial amount of energetic disorder. We fabricate a planar heterojunction solar cell with a (CH 3 NH 3 ) 3 Sb 2 I 9 absorber layer that yields a power conversion efficiency of η ≈ 0.5%, already featuring a decent fill factor (FF) of 55% and open-circuit voltage of 890 mV but low photocurrent densities. The result of this basic study on (CH 3 NH 3 ) 3 Sb 2 I 9 shows that this compound is a possible starting point for further research into Sb-based lead-free perovskite solar cells.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells
Kojima, A., Teshima, K., Shirai, Y., & Miyasaka, T. (2009) · Journal of the American Chemical Society · doi:10.1021/ja809598r · Cited by 23,090
Detailed Balance Limit of Efficiency of p-n Junction Solar Cells
Shockley, W., & Queisser, H. J. (1961) · Journal of Applied Physics · doi:10.1063/1.1736034 · Cited by 13,258
Compositional engineering of perovskite materials for high-performance solar cells
Jeon, N. J., Noh, J. H., Yang, W. S., Kim, Y. C., Ryu, S., Seo, J., & Seok, S. I. (2015) · Nature · doi:10.1038/nature14133 · Cited by 6,431
High-performance photovoltaic perovskite layers fabricated through intramolecular exchange
Yang, W. S., Noh, J. H., Jeon, N. J., Kim, Y. C., Ryu, S., Seo, J., & Seok, S. I. (2015) · Science · doi:10.1126/science.aaa9272 · Cited by 6,251
The Long-Wavelength Edge of Photographic Sensitivity and of the Electronic Absorption of Solids
Urbach, F. (1953) · Physical Review · doi:10.1103/physrev.92.1324 · Cited by 6,047
Lead-free solid-state organic–inorganic halide perovskite solar cells
Hao, F., Stoumpos, C. C., Cao, D. H., Chang, R. P. H., & Kanatzidis, M. G. (2014) · Nature Photonics · doi:10.1038/nphoton.2014.82 · Cited by 3,026
Organic–Inorganic Perovskites: Structural Versatility for Functional Materials Design
Saparov, B., & Mitzi, D. B. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00715 · Cited by 2,907
De Wolf, S., Holovsky, J., Moon, S.-J., Löper, P., Niesen, B., Ledinsky, M., Haug, F.-J., Yum, J.-H., & Ballif, C. (2014) · The Journal of Physical Chemistry Letters · doi:10.1021/jz500279b · Cited by 2,851
Lead-free organic–inorganic tin halide perovskites for photovoltaic applications
Noel, N. K., Stranks, S. D., Abate, A., Wehrenfennig, C., Guarnera, S., Haghighirad, A.-A., Sadhanala, A., Eperon, G. E., Pathak, S. K., Johnston, M. B., et al. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee01076k · Cited by 2,746
Brenner, T. M., Egger, D. A., Kronik, L., Hodes, G., & Cahen, D. (2016) · Nature Reviews Materials · doi:10.1038/natrevmats.2015.7 · Cited by 1,557
Toxicity of organometal halide perovskite solar cells
Babayigit, A., Ethirajan, A., Muller, M., & Conings, B. (2016) · Nature Materials · doi:10.1038/nmat4572 · Cited by 1,533
Bismuth Based Hybrid Perovskites A3Bi2I9 (A: Methylammonium or Cesium) for Solar Cell Application
Park, B., Philippe, B., Zhang, X., Rensmo, H., Boschloo, G., & Johansson, E. M. J. (2015) · Advanced Materials · doi:10.1002/adma.201501978 · Cited by 1,269
Lead‐Free Halide Perovskite Solar Cells with High Photocurrents Realized Through Vacancy Modulation
Kumar, M. H., Dharani, S., Leong, W. L., Boix, P. P., Prabhakar, R. R., Baikie, T., Shi, C., Ding, H., Ramesh, R., Asta, M., et al. (2014) · Advanced Materials · doi:10.1002/adma.201401991 · Cited by 1,209
Lead-Free Halide Double Perovskites via Heterovalent Substitution of Noble Metals
Volonakis, G., Filip, M. R., Haghighirad, A. A., Sakai, N., Wenger, B., Snaith, H. J., & Giustino, F. (2016) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.6b00376 · Cited by 1,146
Templating and structural engineering in organic–inorganic perovskites
Mitzi, D. B. (2001) · Journal of the Chemical Society, Dalton Transactions · doi:10.1039/b007070j · Cited by 945
A molecularly engineered hole-transporting material for efficient perovskite solar cells
Saliba, M., Orlandi, S., Matsui, T., Aghazada, S., Cavazzini, M., Correa-Baena, J.-P., Gao, P., Scopelliti, R., Mosconi, E., Dahmen, K.-H., et al. (2016) · Nature Energy · doi:10.1038/nenergy.2015.17 · Cited by 944
Zhang, W., Saliba, M., Moore, D. T., Pathak, S. K., Hörantner, M. T., Stergiopoulos, T., Stranks, S. D., Eperon, G. E., Alexander-Webber, J. A., Abate, A., et al. (2015) · Nature Communications · doi:10.1038/ncomms7142 · Cited by 920
Brandt, R. E., Stevanović, V., Ginley, D. S., & Buonassisi, T. (2015) · MRS Communications · doi:10.1557/mrc.2015.26 · Cited by 817
Thin-Film Preparation and Characterization of Cs3Sb2I9: A Lead-Free Layered Perovskite Semiconductor
Saparov, B., Hong, F., Sun, J.-P., Duan, H.-S., Meng, W., Cameron, S., Hill, I. G., Yan, Y., & Mitzi, D. B. (2015) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b01989 · Cited by 812
Advances in Perovskite Solar Cells
Zuo, C., Bolink, H. J., Han, H., Huang, J., Cahen, D., & Ding, L. (2016) · Advanced Science · doi:10.1002/advs.201500324 · Cited by 654
Bulk heterojunction perovskite–PCBM solar cells with high fill factor
Chiang, C.-H., & Wu, C.-G. (2016) · Nature Photonics · doi:10.1038/nphoton.2016.3 · Cited by 624
Assessing the toxicity of Pb- and Sn-based perovskite solar cells in model organism Danio rerio
Babayigit, A., Duy Thanh, D., Ethirajan, A., Manca, J., Muller, M., Boyen, H.-G., & Conings, B. (2016) · Scientific Reports · doi:10.1038/srep18721 · Cited by 609
Lead-Free MA2CuClxBr4–x Hybrid Perovskites
Cortecchia, D., Dewi, H. A., Yin, J., Bruno, A., Chen, S., Baikie, T., Boix, P. P., Grätzel, M., Mhaisalkar, S., Soci, C., et al. (2016) · Inorganic Chemistry · doi:10.1021/acs.inorgchem.5b01896 · Cited by 574
Hailegnaw, B., Kirmayer, S., Edri, E., Hodes, G., & Cahen, D. (2015) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.5b00504 · Cited by 523
Lehner, A. J., Fabini, D. H., Evans, H. A., Hébert, C.-A., Smock, S. R., Hu, J., Wang, H., Zwanziger, J. W., Chabinyc, M. L., & Seshadri, R. (2015) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b03147 · Cited by 507
Recombination via tail states in polythiophene:fullerene solar cells
Kirchartz, T., Pieters, B. E., Kirkpatrick, J., Rau, U., & Nelson, J. (2011) · Physical Review B · doi:10.1103/physrevb.83.115209 · Cited by 428
Self-citationSabba, D., Mulmudi, H. K., Prabhakar, R. R., Krishnamoorthy, T., Baikie, T., Boix, P. P., Mhaisalkar, S., & Mathews, N. (2015) · The Journal of Physical Chemistry C · doi:10.1021/jp5126624 · Cited by 421
Perovskite Solar Cells: Beyond Methylammonium Lead Iodide
Boix, P. P., Agarwala, S., Koh, T. M., Mathews, N., & Mhaisalkar, S. G. (2015) · The Journal of Physical Chemistry Letters · doi:10.1021/jz502547f · Cited by 324
Tin‐ and Lead‐Based Perovskite Solar Cells under Scrutiny: An Environmental Perspective
Serrano‐Lujan, L., Espinosa, N., Larsen‐Olsen, T. T., Abad, J., Urbina, A., & Krebs, F. C. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201501119 · Cited by 269
Kirchartz, T., Agostinelli, T., Campoy-Quiles, M., Gong, W., & Nelson, J. (2012) · The Journal of Physical Chemistry Letters · doi:10.1021/jz301639y · Cited by 264
Self-citationMeaning of reaction orders in polymer:fullerene solar cells
Kirchartz, T., & Nelson, J. (2012) · Physical Review B · doi:10.1103/physrevb.86.165201 · Cited by 232
Self-citationZero-dimensional (CH3NH3)3Bi2I9 perovskite for optoelectronic applications
Öz, S., Hebig, J.-C., Jung, E., Singh, T., Lepcha, A., Olthof, S., Jan, F., Gao, Y., German, R., van Loosdrecht, P. H. M., et al. (2016) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2016.01.035 · Cited by 230
Self-citationGarcia-Belmonte, G., & Bisquert, J. (2010) · Applied Physics Letters · doi:10.1063/1.3358121 · Cited by 203
Yi, C., Li, X., Luo, J., Zakeeruddin, S. M., & Grätzel, M. (2016) · Advanced Materials · doi:10.1002/adma.201506049 · Cited by 151
Cited by
Halide Perovskite Photovoltaics: Background, Status, and Future Prospects
Jena, A. K., Kulkarni, A., & Miyasaka, T. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00539 · Cited by 3,087
Toward Lead-Free Perovskite Solar Cells
Giustino, F., & Snaith, H. J. (2016) · ACS Energy Letters · doi:10.1021/acsenergylett.6b00499 · Cited by 1,141
From Lead Halide Perovskites to Lead‐Free Metal Halide Perovskites and Perovskite Derivatives
Xiao, Z., Song, Z., & Yan, Y. (2019) · Advanced Materials · doi:10.1002/adma.201803792 · Cited by 1,090
Xiao, Z., Meng, W., Wang, J., Mitzi, D. B., & Yan, Y. (2017) · Materials Horizons · doi:10.1039/c6mh00519e · Cited by 735
McCall, K. M., Stoumpos, C. C., Kostina, S. S., Kanatzidis, M. G., & Wessels, B. W. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b01184 · Cited by 724
Metadata
- Authors
- Hebig, J.-C., Kühn, I., Flohre, J., & Kirchartz, T.
- Venue
- ACS Energy Letters
- Publisher
- American Chemical Society (ACS)
- Published
- 2016-06-24
- Volume
- 1
- Issue
- 1
- Pages
- 309-314
- ISSN
- 2380-8195 (ISSN-L)
- OpenAlex
- W2469798057
- Cited by
- 375
- References
- 34
- FWCI
- 21.04
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.