The DOI matches its Crossref record; 55 of the 55 references it cites were found in a registry or an index.
Suppressing the Shuttle Effect and Dendrite Growth in Lithium–Sulfur Batteries
Abstract
Practical applications of lithium–sulfur batteries are simultaneously hindered by two serious problems occurring separately in both electrodes, namely, the shuttle effects of lithium polysulfides and the uncontrollable growth of lithium dendrites. Herein, to explore a facile integrated approach to tackle both problems as well as guarantee the efficient charge transfer, we used two-dimension hexagonal VS 2 flakes as the building blocks to assemble nanotowers on the separators, forming a symmetrical double-side-modified polypropylene separator without blocking the membrane pores. Benefiting from the “sulfiphilic” and “lithiophilic” properties, high interfacial electronic conductivity, and the unique hexagonal tower-form nanostructure, the [email protected] separator not only guarantees the effective suppression of the lithium polysulfide shuttle and the rapid ion/electron transfer but also realizes uniform and stable lithium nucleation and growth during cycling. Hence, just at the expense of an 11% increase in the separator weight (0.14 mg cm –2 ), the [email protected] separator delivers an over 16 times higher initial areal capacity (8.3 mAh cm –2 ) than a conventional PP separator (0.5 mAh cm –2 ) under high sulfur-loading conditions (9.24 mg cm –2 ). Even when used under a low electrolyte/sulfur ratio of 4 mL g –1 and a practically relevant N/P ratio of 1.7, the [email protected] separator still enabled stable cycling with a high cell-level gravimetric energy density. The potentials in broader applications (Li–S pouch battery and Li–LiFePO 4 battery) and the promising commercial prospect (large-scale production and recyclability) of the developed separator are also demonstrated.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set
Kresse, G., & Furthmüller, J. (1996) · Physical Review B · doi:10.1103/physrevb.54.11169 · Cited by 123,652
Kresse, G., & Hafner, J. (1994) · Physical Review B · doi:10.1103/physrevb.49.14251 · Cited by 23,019
Reviving the lithium metal anode for high-energy batteries
Lin, D., Liu, Y., & Cui, Y. (2017) · Nature Nanotechnology · doi:10.1038/nnano.2017.16 · Cited by 6,763
Toward Safe Lithium Metal Anode in Rechargeable Batteries: A Review
Cheng, X.-B., Zhang, R., Zhao, C.-Z., & Zhang, Q. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00115 · Cited by 6,197
Flexible and conductive MXene films and nanocomposites with high capacitance
Ling, Z., Ren, C. E., Zhao, M.-Q., Yang, J., Giammarco, J. M., Qiu, J., Barsoum, M. W., & Gogotsi, Y. (2014) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1414215111 · Cited by 2,274
Polyvinylpyrrolidone (PVP) in nanoparticle synthesis
Koczkur, K. M., Mourdikoudis, S., Polavarapu, L., & Skrabalak, S. E. (2015) · Dalton Transactions · doi:10.1039/c5dt02964c · Cited by 1,781
Review on High‐Loading and High‐Energy Lithium–Sulfur Batteries
Peng, H., Huang, J., Cheng, X., & Zhang, Q. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700260 · Cited by 1,746
Metal–organic framework-based separator for lithium–sulfur batteries
Bai, S., Liu, X., Zhu, K., Wu, S., & Zhou, H. (2016) · Nature Energy · doi:10.1038/nenergy.2016.94 · Cited by 1,333
Catalytic oxidation of Li 2 S on the surface of metal sulfides for Li−S batteries
Zhou, G., Tian, H., Jin, Y., Tao, X., Liu, B., Zhang, R., Seh, Z. W., Zhuo, D., Liu, Y., Sun, J., et al. (2017) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1615837114 · Cited by 1,278
Self-citationFeng, J., Sun, X., Wu, C., Peng, L., Lin, C., Hu, S., Yang, J., & Xie, Y. (2011) · Journal of the American Chemical Society · doi:10.1021/ja207176c · Cited by 1,143
Cited by
Status and Prospects of MXene‐Based Lithium–Sulfur Batteries
Zhao, Q., Zhu, Q., Liu, Y., & Xu, B. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202100457 · Cited by 334
Self-citationYao, W., Xu, J., Ma, L., Lu, X., Luo, D., Qian, J., Zhan, L., Manke, I., Yang, C., Adelhelm, P., et al. (2023) · Advanced Materials · doi:10.1002/adma.202212116 · Cited by 317
Rechargeable Metal-Sulfur Batteries: Key Materials to Mechanisms
Yao, W., Liao, K., Lai, T., Sul, H., & Manthiram, A. (2024) · Chemical Reviews · doi:10.1021/acs.chemrev.3c00919 · Cited by 287
Defect Engineering for Expediting Li–S Chemistry: Strategies, Mechanisms, and Perspectives
Shi, Z., Li, M., Sun, J., & Chen, Z. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202100332 · Cited by 269
Metadata
- Authors
- Wang, J., Yi, S., Liu, J., Sun, S., Liu, Y., Yang, D., Xi, K., Gao, G., Abdelkader, A., Yan, W., Ding, S., & Kumar, R. V.
- Venue
- ACS Nano
- Publisher
- American Chemical Society (ACS)
- Published
- 2020-07-07
- Volume
- 14
- Issue
- 8
- Pages
- 9819-9831
- ISSN
- 1936-0851 (ISSN-L)
- 1936-086X
- OpenAlex
- W3040594568
- Cited by
- 344
- References
- 55
- FWCI
- 16.63
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Suppressing the Shuttle Effect and Dendrite Growth in Lithium–Sulfur Batteries. https://app.cochat.ai/papers/10.1021/acsnano.0c02241
- The paper
- Wang, J., Yi, S., Liu, J., Sun, S., Liu, Y., Yang, D., Xi, K., Gao, G., Abdelkader, A., Yan, W., Ding, S., & Kumar, R. V. (2020). Suppressing the Shuttle Effect and Dendrite Growth in Lithium–Sulfur Batteries. ACS Nano. https://doi.org/10.1021/acsnano.0c02241
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.