The DOI matches its Crossref record; 188 of the 188 references it cites were found in a registry or an index.
Chemiresistive Hydrogen Sensors: Fundamentals, Recent Advances, and Challenges
Abstract
Abstract Hydrogen (H2) is one of the next-generation energy sources because it is abundant in nature and has a high combustion efficiency that produces environmentally benign products (H2O). However, H2/air mixtures are explosive at H2 concentrations above 4%, thus any leakage of H2 must be rapidly and reliably detected at much lower concentrations to ensure safety. Among the various types of H2 sensors, chemiresistive sensors are one of the most promising sensing systems due to their simplicity and low cost. This review highlights the advances in H2 chemiresistors, including metal-, semiconducting metal oxide-, carbon-based materials, and other materials. The underlying sensing mechanisms for different types of materials are discussed, and the correlation of sensing performances with nanostructures, surface chemistry, and electronic properties is presented. In addition, the discussion of each material emphasizes key advances and strategies to develop superior H2 sensors. Furthermore, recent key advances in other types of H2 sensors are briefly discussed. Finally, the review concludes with a brief outlook, perspective, and future directions.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Two‐Dimensional Nanocrystals Produced by Exfoliation of Ti3AlC2
Naguib, M., Kurtoglu, M., Presser, V., Lu, J., Niu, J., Heon, M., Hultman, L., Gogotsi, Y., & Barsoum, M. W. (2011) · Advanced Materials · doi:10.1002/adma.201102306 · Cited by 11,855
The chemistry of two-dimensional layered transition metal dichalcogenide nanosheets
Chhowalla, M., Shin, H. S., Eda, G., Li, L.-J., Loh, K. P., & Zhang, H. (2013) · Nature Chemistry · doi:10.1038/nchem.1589 · Cited by 10,034
Self-citationSustainable Hydrogen Production
Turner, J. A. (2004) · Science · doi:10.1126/science.1103197 · Cited by 6,602
Cation Intercalation and High Volumetric Capacitance of Two-Dimensional Titanium Carbide
Lukatskaya, M. R., Mashtalir, O., Ren, C. E., Dall’Agnese, Y., Rozier, P., Taberna, P. L., Naguib, M., Simon, P., Barsoum, M. W., & Gogotsi, Y. (2013) · Science · doi:10.1126/science.1241488 · Cited by 4,320
Ballistic carbon nanotube field-effect transistors
Javey, A., Guo, J., Wang, Q., Lundstrom, M., & Dai, H. (2003) · Nature · doi:10.1038/nature01797 · Cited by 3,187
Metal Oxide Gas Sensors: Sensitivity and Influencing Factors
Wang, C., Yin, L., Zhang, L., Xiang, D., & Gao, R. (2010) · Sensors · doi:10.3390/s100302088 · Cited by 2,928
Gogotsi, Y., & Anasori, B. (2019) · ACS Nano · doi:10.1021/acsnano.9b06394 · Cited by 2,541
Semiconductor metal oxide gas sensors: A review
Dey, A. (2018) · Materials Science and Engineering: B · doi:10.1016/j.mseb.2017.12.036 · Cited by 2,374
Highly sensitive and selective gas sensors using p-type oxide semiconductors: Overview
Kim, H.-J., & Lee, J.-H. (2014) · Sensors and Actuators B: Chemical · doi:10.1016/j.snb.2013.11.005 · Cited by 2,258
Correlation between photoluminescence and oxygen vacancies in ZnO phosphors
Vanheusden, K., Seager, C. H., Warren, W. L., Tallant, D. R., & Voigt, J. A. (1996) · Applied Physics Letters · doi:10.1063/1.116699 · Cited by 2,012
Cited by
Makhado, E., & Seleka, W. M. (2025) · Scientific Reports · doi:10.1038/s41598-025-13976-3 · Cited by 20
Metadata
- Authors
- Koo, W.-T., Cho, H.-J., Kim, D.-H., Kim, Y. H., Shin, H., Penner, R. M., & Kim, I.-D.
- Venue
- ACS Nano
- Publisher
- American Chemical Society (ACS)
- Published
- 2020-10-30
- Volume
- 14
- Issue
- 11
- Pages
- 14284-14322
- ISSN
- 1936-0851 (ISSN-L)
- 1936-086X
- OpenAlex
- W3096338351
- Cited by
- 379
- References
- 188
- FWCI
- 11.48
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.