The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Microbe-Assisted Assembly of Ti3C2Tx MXene on Fungi-Derived Nanoribbon Heterostructures for Ultrastable Sodium and Potassium Ion Storage
Abstract
As a typical family of two-dimensional (2D) materials, MXenes present physiochemical properties and potential for use in energy storage applications. However, MXenes suffer some of the inherent disadvantages of 2D materials, such as severe restacking during processing and service and low capacity of energy storage. Herein, a MXene@N-doped carbonaceous nanofiber structure is designed as the anode for high-performance sodium- and potassium-ion batteries through an in situ bioadsorption strategy; that is, Ti3C2Tx nanosheets are assembled onto Aspergillus niger biofungal nanoribbons and converted into a 2D/1D heterostructure. This microorganism-derived 2D MXene-1D N-doped carbonaceous nanofiber structure with fully opened pores and transport channels delivers high reversible capacity and long-term stability to store both Na+ (349.2 mAh g–1 at 0.1A g–1 for 1000 cycles) and K+ (201.5 mAh g–1 at 1.0 A g–1 for 1000 cycles). Ion-diffusion kinetics analysis and density functional theory calculations reveal that this porous hybrid structure promotes the conduction and transport of Na and K ions and fully utilizes the inherent advantages of the 2D material. Therefore, this work expands the potential of MXene materials and provides a good strategy to address the challenges of 2D energy storage materials.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Achieving high energy density and high power density with pseudocapacitive materials
Choi, C., Ashby, D. S., Butts, D. M., DeBlock, R. H., Wei, Q., Lau, J., & Dunn, B. (2019) · Nature Reviews Materials · doi:10.1038/s41578-019-0142-z · Cited by 1,964
Energy storage: The future enabled by nanomaterials
Pomerantseva, E., Bonaccorso, F., Feng, X., Cui, Y., & Gogotsi, Y. (2019) · Science · doi:10.1126/science.aan8285 · Cited by 1,927
Raman Spectroscopy Analysis of the Structure and Surface Chemistry of Ti3C2T x MXene
Sarycheva, A., & Gogotsi, Y. (2020) · Chemistry of Materials · doi:10.1021/acs.chemmater.0c00359 · Cited by 1,467
Nanowires for Electrochemical Energy Storage
Zhou, G., Xu, L., Hu, G., Mai, L., & Cui, Y. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00326 · Cited by 439
Cited by
Ti3C2Tx MXene for electrode materials of supercapacitors
Ma, R., Chen, Z., Zhao, D., Zhang, X., Zhuo, J., Yin, Y., Wang, X., Yang, G., & Yi, F. (2021) · Journal of Materials Chemistry A · doi:10.1039/d1ta00681a · Cited by 347
Metadata
- Authors
- Cao, J., Sun, Z., Li, J., Zhu, Y., Yuan, Z., Zhang, Y., Li, D., Wang, L., & Han, W.
- Venue
- ACS Nano
- Publisher
- American Chemical Society (ACS)
- Published
- 2021-01-26
- Volume
- 15
- Issue
- 2
- Pages
- 3423-3433
- ISSN
- 1936-0851 (ISSN-L)
- 1936-086X
- OpenAlex
- W3122900557
- Cited by
- 215
- References
- 4
- FWCI
- 12.73
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Microbe-Assisted Assembly of Ti3C2Tx MXene on Fungi-Derived Nanoribbon Heterostructures for Ultrastable Sodium and Potassium Ion Storage. https://app.cochat.ai/papers/10.1021/acsnano.0c10491
- The paper
- Cao, J., Sun, Z., Li, J., Zhu, Y., Yuan, Z., Zhang, Y., Li, D., Wang, L., & Han, W. (2021). Microbe-Assisted Assembly of Ti3C2Tx MXene on Fungi-Derived Nanoribbon Heterostructures for Ultrastable Sodium and Potassium Ion Storage. ACS Nano. https://doi.org/10.1021/acsnano.0c10491
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.