Nanoconfined and in Situ Catalyzed MgH2 Self-Assembled on 3D Ti3C2 MXene Folded Nanosheets with Enhanced Hydrogen Sorption Performances
The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Abstract
Abstract MXenes are considered as potential support materials for nanoconfinement of MgH2/Mg to improve the hydrogen storage properties. However, it has never been realized so far due to the stacking and oxidation problems caused by unexpected surface terminations (−OH, −O, etc.) on MXenes. In this study, hexadecyl trimethylammonium bromide was used to build a 3D Ti3C2Tx architecture of folded nanosheets to reduce the stacking risk of flakes, and a bottom-up self-assembly strategy was successfully applied to synthesize ultradispersed MgH2 nanoparticles anchored on the surface of the annealed 3D Ti3C2Tx (Ti-MX). The composite with a 60 wt % loading of MgH2 NPs, 60MgH2@Ti-MX, starts to decompose at 140 °C and is capable of releasing 3.0 wt % H2 at 150 °C within 2.5 h. In addition, a reversible capacity up to 4.0 wt % H2 was still maintained after 60 cycles at 200 °C without obvious loss in kinetics. In situ high-resolution TEM observations of the decomposition process together with other analyses revealed that the nanosize effect caused by the nanoconfinement and the multiphasic interfaces between MgH2(Mg) and Ti-MX, especially the in situ formed catalytic TiH2, were main reasons accounting for the superior hydrogen sorption performances.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Alternative energy technologies
Dresselhaus, M. S., & Thomas, I. L. (2001) · Nature · doi:10.1038/35104599 · Cited by 4,894
Jeon, K.-J., Moon, H. R., Ruminski, A. M., Jiang, B., Kisielowski, C., Bardhan, R., & Urban, J. J. (2011) · Nature Materials · doi:10.1038/nmat2978 · Cited by 731
Yu, X., Tang, Z., Sun, D., Ouyang, L., & Zhu, M. (2017) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.03.001 · Cited by 716
Cited by
Ren, L., Li, Y., Zhang, N., Li, Z., Lin, X., Zhu, W., Lu, C., Ding, W., & Zou, J. (2023) · Nano-Micro Letters · doi:10.1007/s40820-023-01041-5 · Cited by 309
Self-citation
Metadata
- Authors
- Zhu, W., Ren, L., Lu, C., Xu, H., Sun, F., Ma, Z., & Zou, J.
- Venue
- ACS Nano
- Publisher
- American Chemical Society (ACS)
- Published
- 2021-10-26
- Volume
- 15
- Issue
- 11
- Pages
- 18494-18504
- ISSN
- 1936-0851 (ISSN-L)
- 1936-086X
- OpenAlex
- W3208424495
- Cited by
- 189
- References
- 3
- FWCI
- 8.17
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.