The DOI matches its Crossref record; 30 of the 30 references it cites were found in a registry or an index.
Highly Efficient Flexible Perovskite Solar Cells with Antireflection and Self-Cleaning Nanostructures
Abstract
Flexible thin film solar cells have attracted a great deal of attention as mobile power sources and key components for building-integrated photovoltaics, due to their light weight and flexible features in addition to compatibility with low-cost roll-to-roll fabrication processes. Among many thin film materials, organometallic perovskite materials are emerging as highly promising candidates for high efficiency thin film photovoltaics; however, the performance, scalability, and reliability of the flexible perovskite solar cells still have large room to improve. Herein, we report highly efficient, flexible perovskite solar cells fabricated on ultrathin flexible glasses. In such a device structure, the flexible glass substrate is highly transparent and robust, with low thermal expansion coefficient, and perovskite thin film was deposited with a thermal evaporation method that showed large-scale uniformity. In addition, a nanocone array antireflection film was attached to the front side of the glass substrate in order to improve the optical transmittance and to achieve a water-repelling effect at the same time. It was found that the fabricated solar cells have reasonable bendability, with 96% of the initial value remaining after 200 bending cycles, and the power conversion efficiency was improved from 12.06 to 13.14% by using the antireflection film, which also demonstrated excellent superhydrophobicity.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells
Kojima, A., Teshima, K., Shirai, Y., & Miyasaka, T. (2009) · Journal of the American Chemical Society · doi:10.1021/ja809598r · Cited by 23,090
Efficient Hybrid Solar Cells Based on Meso-Superstructured Organometal Halide Perovskites
Lee, M. M., Teuscher, J., Miyasaka, T., Murakami, T. N., & Snaith, H. J. (2012) · Science · doi:10.1126/science.1228604 · Cited by 10,687
Stranks, S. D., Eperon, G. E., Grancini, G., Menelaou, C., Alcocer, M. J. P., Leijtens, T., Herz, L. M., Petrozza, A., & Snaith, H. J. (2013) · Science · doi:10.1126/science.1243982 · Cited by 10,413
Sequential deposition as a route to high-performance perovskite-sensitized solar cells
Burschka, J., Pellet, N., Moon, S.-J., Humphry-Baker, R., Gao, P., Nazeeruddin, M. K., & Grätzel, M. (2013) · Nature · doi:10.1038/nature12340 · Cited by 9,547
Efficient planar heterojunction perovskite solar cells by vapour deposition
Liu, M., Johnston, M. B., & Snaith, H. J. (2013) · Nature · doi:10.1038/nature12509 · Cited by 7,976
Electron-hole diffusion lengths > 175 μm in solution-grown CH 3 NH 3 PbI 3 single crystals
Dong, Q., Fang, Y., Shao, Y., Mulligan, P., Qiu, J., Cao, L., & Huang, J. (2015) · Science · doi:10.1126/science.aaa5760 · Cited by 5,643
Stoumpos, C. C., Malliakas, C. D., & Kanatzidis, M. G. (2013) · Inorganic Chemistry · doi:10.1021/ic401215x · Cited by 5,416
High-efficiency solution-processed perovskite solar cells with millimeter-scale grains
Nie, W., Tsai, H., Asadpour, R., Blancon, J.-C., Neukirch, A. J., Gupta, G., Crochet, J. J., Chhowalla, M., Tretiak, S., Alam, M. A., et al. (2015) · Science · doi:10.1126/science.aaa0472 · Cited by 3,295
Liu, D., & Kelly, T. L. (2014) · Nature Photonics · doi:10.1038/nphoton.2013.342 · Cited by 2,663
National Renewable Energy Laboratory
Karim, S., Faissal, A., & Noureddine, E. B. (2022) · Handbook of Algal Biofuels · doi:10.1016/b978-0-12-823764-9.00006-6 · Cited by 2,558
Cited by
Song, Z., McElvany, C. L., Phillips, A. B., Celik, I., Krantz, P. W., Watthage, S. C., Liyanage, G. K., Apul, D., & Heben, M. J. (2017) · Energy & Environmental Science · doi:10.1039/c7ee00757d · Cited by 613
Li, L., Wang, Y., Wang, X., Lin, R., Luo, X., Liu, Z., Zhou, K., Xiong, S., Bao, Q., Chen, G., et al. (2022) · Nature Energy · doi:10.1038/s41560-022-01045-2 · Cited by 534
Recent Advances in Flexible Perovskite Solar Cells: Fabrication and Applications
Yang, D., Yang, R., Priya, S., & Liu, S. (. (2019) · Angewandte Chemie International Edition · doi:10.1002/anie.201809781 · Cited by 461
Flexible Perovskite Solar Cells
Jung, H. S., Han, G. S., Park, N.-G., & Ko, M. J. (2019) · Joule · doi:10.1016/j.joule.2019.07.023 · Cited by 449
Progress, challenges and perspectives in flexible perovskite solar cells
Di Giacomo, F., Fakharuddin, A., Jose, R., & Brown, T. M. (2016) · Energy & Environmental Science · doi:10.1039/c6ee01137c · Cited by 428
Device stability of perovskite solar cells – A review
Asghar, M. I., Zhang, J., Wang, H., & Lund, P. D. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.04.003 · Cited by 423
A review of aspects of additive engineering in perovskite solar cells
Mahapatra, A., Prochowicz, D., Tavakoli, M. M., Trivedi, S., Kumar, P., & Yadav, P. (2020) · Journal of Materials Chemistry A · doi:10.1039/c9ta07657c · Cited by 369
Self-citationAll‐Carbon‐Electrode‐Based Endurable Flexible Perovskite Solar Cells
Luo, Q., Ma, H., Hou, Q., Li, Y., Ren, J., Dai, X., Yao, Z., Zhou, Y., Xiang, L., Du, H., et al. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201706777 · Cited by 346
Tavakoli, M. M., Yadav, P., Tavakoli, R., & Kong, J. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201800794 · Cited by 325
Self-citationTavakoli, M. M., Yadav, P., Prochowicz, D., Sponseller, M., Osherov, A., Bulović, V., & Kong, J. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201803587 · Cited by 269
Self-citationWaleed, A., Tavakoli, M. M., Gu, L., Hussain, S., Zhang, D., Poddar, S., Wang, Z., Zhang, R., & Fan, Z. (2017) · Nano Letters · doi:10.1021/acs.nanolett.7b02101 · Cited by 262
Self-citationTavakoli, M. M., Gu, L., Gao, Y., Reckmeier, C., He, J., Rogach, A. L., Yao, Y., & Fan, Z. (2015) · Scientific Reports · doi:10.1038/srep14083 · Cited by 259
Self-citationWang, W., & Qi, L. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201807275 · Cited by 256
Micro‐ and Nanostructured Lead Halide Perovskites: From Materials to Integrations and Devices
Wang, K., Xing, G., Song, Q., & Xiao, S. (2021) · Advanced Materials · doi:10.1002/adma.202000306 · Cited by 126
Mechanical Durability and Flexibility in Perovskite Photovoltaics: Advancements and Applications
Song, F., Zheng, D., Feng, J., Liu, J., Ye, T., Li, Z., Wang, K., Liu, S. (., & Yang, D. (2024) · Advanced Materials · doi:10.1002/adma.202312041 · Cited by 113
Flexible and Wearable Optoelectronic Devices Based on Perovskites
Zhao, R., Gu, Z., Li, P., Zhang, Y., & Song, Y. (2022) · Advanced Materials Technologies · doi:10.1002/admt.202101124 · Cited by 83
Machine learning enabled development of unexplored perovskite solar cells with high efficiency
Yan, W., Liu, Y., Zang, Y., Cheng, J., Wang, Y., Chu, L., Tan, X., Liu, L., Zhou, P., Li, W., et al. (2022) · Nano Energy · doi:10.1016/j.nanoen.2022.107394 · Cited by 82
Xu, X., Zhang, X., Deng, W., Jie, J., & Zhang, X. (2018) · Small Methods · doi:10.1002/smtd.201700340 · Cited by 44
Metadata
- Authors
- Tavakoli, M. M., Tsui, K.-H., Zhang, Q., He, J., Yao, Y., Li, D., & Fan, Z.
- Venue
- ACS Nano
- Publisher
- American Chemical Society (ACS)
- Published
- 2015-09-03
- Volume
- 9
- Issue
- 10
- Pages
- 10287-10295
- ISSN
- 1936-0851 (ISSN-L)
- 1936-086X
- OpenAlex
- W2311518558
- Cited by
- 393
- References
- 30
- FWCI
- 19.09
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.