The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Functionalized Graphene Enables Highly Efficient Solar Thermal Steam Generation
Open accessAbstract
The ability to efficiently utilize solar thermal energy to enable liquid-to-vapor phase transition has great technological implications for a wide variety of applications, such as water treatment and chemical fractionation. Here, we demonstrate that functionalizing graphene using hydrophilic groups can greatly enhance the solar thermal steam generation efficiency. Our results show that specially functionalized graphene can improve the overall solar-to-vapor efficiency from 38% to 48% at one sun conditions compared to chemically reduced graphene oxide. Our experiments show that such an improvement is a surface effect mainly attributed to the more hydrophilic feature of functionalized graphene, which influences the water meniscus profile at the vapor-liquid interface due to capillary effect. This will lead to thinner water films close to the three-phase contact line, where the water surface temperature is higher since the resistance of thinner water film is smaller, leading to more efficient evaporation. This strategy of functionalizing graphene to make it more hydrophilic can be potentially integrated with the existing macroscopic heat isolation strategies to further improve the overall solar-to-vapor conversion efficiency.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Solar steam generation by heat localization
Ghasemi, H., Ni, G., Marconnet, A. M., Loomis, J., Yerci, S., Miljkovic, N., & Chen, G. (2014) · Nature Communications · doi:10.1038/ncomms5449 · Cited by 2,333
Thermal Conductance of Hydrophilic and Hydrophobic Interfaces
Ge, Z., Cahill, D. G., & Braun, P. V. (2006) · Physical Review Letters · doi:10.1103/physrevlett.96.186101 · Cited by 455
Enhancing solid-liquid interface thermal transport using self-assembled monolayers
Tian, Z., Marconnet, A., & Chen, G. (2015) · Applied Physics Letters · doi:10.1063/1.4921758 · Cited by 95
Cited by
A salt-rejecting floating solar still for low-cost desalination
Ni, G., Zandavi, S. H., Javid, S. M., Boriskina, S. V., Cooper, T. A., & Chen, G. (2018) · Energy & Environmental Science · doi:10.1039/c8ee00220g · Cited by 939
Tarcan, R., Todor-Boer, O., Petrovai, I., Leordean, C., Astilean, S., & Botiz, I. (2020) · Journal of Materials Chemistry C · doi:10.1039/c9tc04916a · Cited by 723
Applications of Phosphorene and Black Phosphorus in Energy Conversion and Storage Devices
Pang, J., Bachmatiuk, A., Yin, Y., Trzebicka, B., Zhao, L., Fu, L., Mendes, R. G., Gemming, T., Liu, Z., & Rummeli, M. H. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201702093 · Cited by 518
Zhang, Q., Yi, G., Fu, Z., Yu, H., Chen, S., & Quan, X. (2019) · ACS Nano · doi:10.1021/acsnano.9b06180 · Cited by 420
Jiang, F., Liu, H., Li, Y., Kuang, Y., Xu, X., Chen, C., Huang, H., Jia, C., Zhao, X., Hitz, E., et al. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b15125 · Cited by 406
Metadata
- Authors
- Yang, J., Pang, Y., Huang, W., Shaw, S. K., Schiffbauer, J., Pillers, M. A., Mu, X., Luo, S., Zhang, T., Huang, Y., Li, G., Ptasinska, S., Lieberman, M., & Luo, T.
- Venue
- ACS Nano
- Publisher
- American Chemical Society (ACS)
- Published
- 2017-05-18
- Volume
- 11
- Issue
- 6
- Pages
- 5510-5518
- ISSN
- 1936-0851 (ISSN-L)
- 1936-086X
- OpenAlex
- W2616022113
- Cited by
- 383
- References
- 3
- FWCI
- 13.73
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.