The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Sandwich-Type NbS2@S@I-Doped Graphene for High-Sulfur-Loaded, Ultrahigh-Rate, and Long-Life Lithium–Sulfur Batteries
Abstract
Lithium–sulfur batteries practically suffer from short cycling life, low sulfur utilization, and safety concerns, particularly at ultrahigh rates and high sulfur loading. To address these problems, we have designed and synthesized a ternary NbS 2 @S@IG composite consisting of sandwich-type NbS 2 @S enveloped by iodine-doped graphene (IG). The sandwich-type structure provides an interconnected conductive network and plane-to-point intimate contact between layered NbS 2 (or IG) and sulfur particles, enabling sulfur species to be efficiently entrapped and utilized at ultrahigh rates, while the structural integrity is well maintained. NbS 2 @S@IG exhibits prominent high-power charge/discharge performances. Reversible capacities of 195, 107, and 74 mA h g –1 (1.05 mg cm –2 ) have been achieved after 2000 cycles at ultrahigh rates of 20, 30, and 40 C, respectively, and the corresponding average decay rates per cycle are 0.022%, 0.031% and 0.033%, respectively. When the area sulfur loading is increased to 3.25 mg cm –2, the electrode still maintains a high discharge capacity of 405 mAh g –1 after 600 cycles at 1 C. Three half-cells in series assembled with NbS 2 @S@IG can drive 60 indicators of LED modules after only 18 s of charging. The instantaneous current and power of the device reach 196.9 A g –1 and 1369.7 W g –1, respectively.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Wang, Z., Dong, Y., Li, H., Zhao, Z., Bin Wu, H., Hao, C., Liu, S., Qiu, J., & Lou, X. W. (2014) · Nature Communications · doi:10.1038/ncomms6002 · Cited by 1,059
Cited by
Advances in Lithium–Sulfur Batteries: From Academic Research to Commercial Viability
Chen, Y., Wang, T., Tian, H., Su, D., Zhang, Q., & Wang, G. (2021) · Advanced Materials · doi:10.1002/adma.202003666 · Cited by 870
Zhang, L., Liu, D., Muhammad, Z., Wan, F., Xie, W., Wang, Y., Song, L., Niu, Z., & Chen, J. (2019) · Advanced Materials · doi:10.1002/adma.201903955 · Cited by 713
Self-citationDeciphering the Modulation Essence of p Bands in Co-Based Compounds on Li-S Chemistry
Zhou, J., Liu, X., Zhu, L., Zhou, J., Guan, Y., Chen, L., Niu, S., Cai, J., Sun, D., Zhu, Y., et al. (2018) · Joule · doi:10.1016/j.joule.2018.08.010 · Cited by 548
Layered Transition Metal Dichalcogenide‐Based Nanomaterials for Electrochemical Energy Storage
Yun, Q., Li, L., Hu, Z., Lu, Q., Chen, B., & Zhang, H. (2020) · Advanced Materials · doi:10.1002/adma.201903826 · Cited by 506
Rational Design of MXene/1T‐2H MoS2‐C Nanohybrids for High‐Performance Lithium–Sulfur Batteries
Zhang, Y., Mu, Z., Yang, C., Xu, Z., Zhang, S., Zhang, X., Li, Y., Lai, J., Sun, Z., Yang, Y., et al. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201707578 · Cited by 417
Metadata
- Authors
- Xiao, Z., Yang, Z., Zhang, L., Pan, H., & Wang, R.
- Venue
- ACS Nano
- Publisher
- American Chemical Society (ACS)
- Published
- 2017-08-01
- Volume
- 11
- Issue
- 8
- Pages
- 8488-8498
- ISSN
- 1936-0851 (ISSN-L)
- 1936-086X
- OpenAlex
- W2738700695
- Cited by
- 194
- References
- 1
- FWCI
- 12.08
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.