The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Three-Dimensional Printed Thermal Regulation Textiles
Abstract
Space cooling is a predominant part of energy consumption in people's daily life. Although cooling the whole building is an effective way to provide personal comfort in hot weather, it is energy-consuming and high-cost. Personal cooling technology, being able to provide personal thermal comfort by directing local heat to the thermally regulated environment, has been regarded as one of the most promising technologies for cooling energy and cost savings. Here, we demonstrate a personal thermal regulated textile using thermally conductive and highly aligned boron nitride (BN)/poly(vinyl alcohol) (PVA) composite (denoted as a-BN/PVA) fibers to improve the thermal transport properties of textiles for personal cooling. The a-BN/PVA composite fibers are fabricated through a fast and scalable three-dimensional (3D) printing method. Uniform dispersion and high alignment of BN nanosheets (BNNSs) can be achieved during the processing of fiber fabrication, leading to a combination of high mechanical strength (355 MPa) and favorable heat dispersion. Due to the improved thermal transport property imparted by the thermally conductive and highly aligned BNNSs, better cooling effect (55% improvement over the commercial cotton fiber) can be realized in the a-BN/PVA textile. The wearable a-BN/PVA textiles containing the 3D-printed a-BN/PVA fibers offer a promising selection for meeting the personal cooling requirement, which can significantly reduce the energy consumption and cost for cooling the whole building.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Flexible Technologies for Self-Powered Wearable Health and Environmental Sensing
Misra, V., Bozkurt, A., Calhoun, B., Jackson, T., Jur, J., Lach, J., Lee, B., Muth, J., Oralkan, O., Ozturk, M., et al. (2015) · Proceedings of the IEEE · doi:10.1109/jproc.2015.2412493 · Cited by 202
Cited by
Umair, M. M., Zhang, Y., Iqbal, K., Zhang, S., & Tang, B. (2019) · Applied Energy · doi:10.1016/j.apenergy.2018.11.017 · Cited by 852
Chen, J., Huang, X., Sun, B., & Jiang, P. (2019) · ACS Nano · doi:10.1021/acsnano.8b06290 · Cited by 768
Advanced Textiles for Personal Thermal Management and Energy
Peng, Y., & Cui, Y. (2020) · Joule · doi:10.1016/j.joule.2020.02.011 · Cited by 747
Significance of Nanomaterials in Wearables: A Review on Wearable Actuators and Sensors
Jayathilaka, W. A. D. M., Qi, K., Qin, Y., Chinnappan, A., Serrano‐García, W., Baskar, C., Wang, H., He, J., Cui, S., Thomas, S. W., et al. (2019) · Advanced Materials · doi:10.1002/adma.201805921 · Cited by 627
Bioinspired Janus Textile with Conical Micropores for Human Body Moisture and Thermal Management
Dai, B., Li, K., Shi, L., Wan, X., Liu, X., Zhang, F., Jiang, L., & Wang, S. (2019) · Advanced Materials · doi:10.1002/adma.201904113 · Cited by 455
Metadata
- Authors
- Gao, T., Yang, Z., Chen, C., Li, Y., Fu, K., Dai, J., Hitz, E. M., Xie, H., Liu, B., Song, J., Yang, B., & Hu, L.
- Venue
- ACS Nano
- Publisher
- American Chemical Society (ACS)
- Published
- 2017-11-01
- Volume
- 11
- Issue
- 11
- Pages
- 11513-11520
- ISSN
- 1936-0851 (ISSN-L)
- 1936-086X
- OpenAlex
- W2766955747
- Cited by
- 378
- References
- 1
- FWCI
- 10.61
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
