The DOI matches its Crossref record; 67 of the 67 references it cites were found in a registry or an index.
Three-Dimensional Network Architecture with Hybrid Nanocarbon Composites Supporting Few-Layer MoS2 for Lithium and Sodium Storage
Abstract
The exploration of anode materials for lithium ion batteries (LIBs) or sodium ion batteries (SIBs) represents a grand technological challenge to meet the continuously increased demand for the high-performance energy storage market. Here we report a facile and reliable synthetic strategy for in situ growth of few-layer MoS 2 nanosheets on reduced graphene oxide (rGO) cross-linked hollow carbon spheres (HCS) with formation of three-dimensional (3D) network nanohybrids (MoS 2 -rGO/HCS). Systematic electrochemical studies demonstrate, as an anode of LIBs, the as-developed MoS 2 -rGO/HCS can deliver a reversible capacity of 1145 mAh g –1 after 100 cycles at 0.1 A g –1 and a revisible capacity of 753 mAh g –1 over 1000 cycles at 2 A g –1 . For SIBs, the as-developed MoS 2 -rGO/HCS can also maintain a reversible capacity of 443 mAh g –1 at 1 A g –1 after 500 cycles. The excellent electrochemical performance can be attributed to the 3D porous structures, in which the few-layer MoS 2 nanosheets with expanded interlayers can provide shortened ion diffusion paths and improved Li + /Na + diffusion mobility, and the hollow porous carbon spheres and the outside graphene network are able to improve the conductivity and maintain the structural integrity.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Preparation of Graphitic Oxide
Hummers, W. S., & Offeman, R. E. (1958) · Journal of the American Chemical Society · doi:10.1021/ja01539a017 · Cited by 29,920
The chemistry of two-dimensional layered transition metal dichalcogenide nanosheets
Chhowalla, M., Shin, H. S., Eda, G., Li, L.-J., Loh, K. P., & Zhang, H. (2013) · Nature Chemistry · doi:10.1038/nchem.1589 · Cited by 10,034
Processable aqueous dispersions of graphene nanosheets
Li, D., Müller, M. B., Gilje, S., Kaner, R. B., & Wallace, G. G. (2008) · Nature Nanotechnology · doi:10.1038/nnano.2007.451 · Cited by 9,114
High-rate electrochemical energy storage through Li+ intercalation pseudocapacitance
Augustyn, V., Come, J., Lowe, M. A., Kim, J. W., Taberna, P.-L., Tolbert, S. H., Abruña, H. D., Simon, P., & Dunn, B. (2013) · Nature Materials · doi:10.1038/nmat3601 · Cited by 5,177
Photoluminescence from Chemically Exfoliated MoS 2
Eda, G., Yamaguchi, H., Voiry, D., Fujita, T., Chen, M., & Chhowalla, M. (2011) · Nano Letters · doi:10.1021/nl201874w · Cited by 3,896
Chang, K., & Chen, W. (2011) · ACS Nano · doi:10.1021/nn200659w · Cited by 1,663
Three-dimensional holey-graphene/niobia composite architectures for ultrahigh-rate energy storage
Sun, H., Mei, L., Liang, J., Zhao, Z., Lee, C., Fei, H., Ding, M., Lau, J., Li, M., Wang, C., et al. (2017) · Science · doi:10.1126/science.aam5852 · Cited by 1,461
MoS2/Graphene Composite Paper for Sodium-Ion Battery Electrodes
David, L., Bhandavat, R., & Singh, G. (2014) · ACS Nano · doi:10.1021/nn406156b · Cited by 1,212
Hwang, H., Kim, H., & Cho, J. (2011) · Nano Letters · doi:10.1021/nl202675f · Cited by 1,064
Two-dimensional heterostructures for energy storage
Pomerantseva, E., & Gogotsi, Y. (2017) · Nature Energy · doi:10.1038/nenergy.2017.89 · Cited by 1,042
Cited by
Chen, B., Chao, D., Liu, E., Jaroniec, M., Zhao, N., & Qiao, S.-Z. (2020) · Energy & Environmental Science · doi:10.1039/c9ee03549d · Cited by 421
Pan, Q., Zhang, Q., Zheng, F., Liu, Y., Li, Y., Ou, X., Xiong, X., Yang, C., & Liu, M. (2018) · ACS Nano · doi:10.1021/acsnano.8b07172 · Cited by 311
Self-citation
Metadata
- Authors
- Hu, X., Li, Y., Zeng, G., Jia, J., Zhan, H., & Wen, Z.
- Venue
- ACS Nano
- Publisher
- American Chemical Society (ACS)
- Published
- 2018-02-15
- Volume
- 12
- Issue
- 2
- Pages
- 1592-1602
- ISSN
- 1936-0851 (ISSN-L)
- 1936-086X
- OpenAlex
- W2786411119
- Cited by
- 318
- References
- 67
- FWCI
- 19.95
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.