The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Interlayer Friction and Superlubricity in Single-Crystalline Contact Enabled by Two-Dimensional Flake-Wrapped Atomic Force Microscope Tips
Abstract
Interlayer friction between the atomic planes of 2D materials and heterostructures is a promising probe of the physics in their interlayer couplings and superlubricity. However, it is still challenging to measure the interlayer friction between well-defined 2D layers. We propose an approach of thermally assisted mechanical exfoliation and transfer to fabricate various 2D flake-wrapped atomic force microscopy (AFM) tips and to directly measure the interlayer friction between 2D flakes in single-crystalline contact. First, superlubricity between different 2D flakes and layered bulk materials is achieved with a friction coefficient as low as 10 –4 . The rotation angle dependence of superlubricity is observed for friction between graphite layers, whereas it is not observed between graphite and h-BN because of the incommensurate contact of the mismatched lattices. Second, the interlayer lateral force map between ReS 2 layers is measured with atomic resolution, showing hexagonal patterns, as further verified by theoretical simulations. The tribological system constructed here offers an experimental platform to study interlayer couplings and friction between 2D flakes and layered bulk materials.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Calculation of thermal noise in atomic force microscopy
Butt, H. J., & Jaschke, M. (1995) · Nanotechnology · doi:10.1088/0957-4484/6/1/001 · Cited by 1,589
Cited by
Solid Lubrication with MoS2: A Review
Vazirisereshk, M. R., Martini, A., Strubbe, D. A., & Baykara, M. Z. (2019) · Lubricants · doi:10.3390/lubricants7070057 · Cited by 605
A review of recent advances in tribology
Meng, Y., Xu, J., Jin, Z., Prakash, B., & Hu, Y. (2020) · Friction · doi:10.1007/s40544-020-0367-2 · Cited by 594
Self-citationTribology of two-dimensional materials: From mechanisms to modulating strategies
Zhang, S., Ma, T., Erdemir, A., & Li, Q. (2019) · Materials Today · doi:10.1016/j.mattod.2018.12.002 · Cited by 407
Self-citationLuo, J., Liu, M., & Ma, L. (2021) · Nano Energy · doi:10.1016/j.nanoen.2021.106092 · Cited by 295
Self-citationLuo, J., & Zhou, X. (2020) · Friction · doi:10.1007/s40544-020-0393-0 · Cited by 273
Self-citation
Metadata
- Authors
- Liu, Y., Song, A., Xu, Z., Zong, R., Zhang, J., Yang, W., Wang, R., Hu, Y., Luo, J., & Ma, T.
- Venue
- ACS Nano
- Publisher
- American Chemical Society (ACS)
- Published
- 2018-07-30
- Volume
- 12
- Issue
- 8
- Pages
- 7638-7646
- ISSN
- 1936-0851 (ISSN-L)
- 1936-086X
- OpenAlex
- W2884214282
- Cited by
- 177
- References
- 1
- FWCI
- 7.48
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.