The DOI matches its Crossref record; 58 of the 58 references it cites were found in a registry or an index.
Efficient Light-Emitting Diodes Based on in Situ Fabricated FAPbBr3 Nanocrystals: The Enhancing Role of the Ligand-Assisted Reprecipitation Process
Abstract
In this paper, we reported the in situ fabrication of highly luminescent formamidinium lead bromide (FAPbBr 3 ) nanocrystal thin films by dropping toluene as an anti-solvent during the spin-coating with a perovskite precursor solution using 3,3-diphenylpropylamine bromide (DPPA-Br) as a ligand. The resulting films are uniform and composed of 5–20 nm FAPbBr 3 perovskite nanocrystals. By monitoring the solvent mixing of anti-solvent and precursor solution on the substrates, we illustrated the difference between the ligand-assisted reprecipitation (LARP) process and the nanocrystal-pinning (NCP) process. This understanding provides a guideline for film optimization, and the optimized films obtained through the in situ LARP process exhibit strong photoluminescence emission at 528 nm, with quantum yields up to 78% and an average photoluminescence lifetime of 12.7 ns. In addition, an exciton binding energy of 57.5 meV was derived from the temperature-dependent photoluminescence measurement. More importantly, we achieved highly efficient pure green perovskite based light-emitting diode (PeLEDs) devices with an average external quantum efficiency (EQE) of 7.3% (maximum EQE is 16.3%) and an average current efficiency (CE) of 29.5 cd A –1 (maximum CE is 66.3 cd A –1 ) by adapting a conventional device structure of ITO/PEDOT:PSS/TFB/perovskite film/TPBi/LiF/Al. It is expected that the in situ LARP process provides an effective methodology for the improvement of the performance of PeLEDs.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Protesescu, L., Yakunin, S., Bodnarchuk, M. I., Krieg, F., Caputo, R., Hendon, C. H., Yang, R. X., Walsh, A., & Kovalenko, M. V. (2015) · Nano Letters · doi:10.1021/nl5048779 · Cited by 9,209
Bright light-emitting diodes based on organometal halide perovskite
Tan, Z.-K., Moghaddam, R. S., Lai, M. L., Docampo, P., Higler, R., Deschler, F., Price, M., Sadhanala, A., Pazos, L. M., Credgington, D., et al. (2014) · Nature Nanotechnology · doi:10.1038/nnano.2014.149 · Cited by 4,450
Metal-halide perovskites for photovoltaic and light-emitting devices
Stranks, S. D., & Snaith, H. J. (2015) · Nature Nanotechnology · doi:10.1038/nnano.2015.90 · Cited by 3,392
Low-temperature solution-processed wavelength-tunable perovskites for lasing
Xing, G., Mathews, N., Lim, S. S., Yantara, N., Liu, X., Sabba, D., Grätzel, M., Mhaisalkar, S., & Sum, T. C. (2014) · Nature Materials · doi:10.1038/nmat3911 · Cited by 3,219
Overcoming the electroluminescence efficiency limitations of perovskite light-emitting diodes
Cho, H., Jeong, S.-H., Park, M.-H., Kim, Y.-H., Wolf, C., Lee, C.-L., Heo, J. H., Sadhanala, A., Myoung, N., Yoo, S., et al. (2015) · Science · doi:10.1126/science.aad1818 · Cited by 2,925
Organic–Inorganic Perovskites: Structural Versatility for Functional Materials Design
Saparov, B., & Mitzi, D. B. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00715 · Cited by 2,907
Quantum Dot Light‐Emitting Diodes Based on Inorganic Perovskite Cesium Lead Halides (CsPbX3)
Song, J., Li, J., Li, X., Xu, L., Dong, Y., & Zeng, H. (2015) · Advanced Materials · doi:10.1002/adma.201502567 · Cited by 2,896
Self-citationLead halide perovskite nanowire lasers with low lasing thresholds and high quality factors
Zhu, H., Fu, Y., Meng, F., Wu, X., Gong, Z., Ding, Q., Gustafsson, M. V., Trinh, M. T., Jin, S., & Zhu, X.-Y. (2015) · Nature Materials · doi:10.1038/nmat4271 · Cited by 2,836
Self-citationZhang, F., Zhong, H., Chen, C., Wu, X.-G., Hu, X., Huang, H., Han, J., Zou, B., & Dong, Y. (2015) · ACS Nano · doi:10.1021/acsnano.5b01154 · Cited by 2,431
Self-citationPerovskite energy funnels for efficient light-emitting diodes
Yuan, M., Quan, L. N., Comin, R., Walters, G., Sabatini, R., Voznyy, O., Hoogland, S., Zhao, Y., Beauregard, E. M., Kanjanaboos, P., et al. (2016) · Nature Nanotechnology · doi:10.1038/nnano.2016.110 · Cited by 2,325
Cited by
State of the Art and Prospects for Halide Perovskite Nanocrystals
Dey, A., Ye, J., De, A., Debroye, E., Ha, S. K., Bladt, E., Kshirsagar, A. S., Wang, Z., Yin, J., Wang, Y., et al. (2021) · ACS Nano · doi:10.1021/acsnano.0c08903 · Cited by 1,478
Self-citationWei, Y., Cheng, Z., & Lin, J. (2019) · Chemical Society Reviews · doi:10.1039/c8cs00740c · Cited by 1,206
Low‐Dimensional Metal Halide Perovskite Photodetectors
Wang, H., Li, S., Liu, X., Shi, Z., Fang, X., & He, J. (2021) · Advanced Materials · doi:10.1002/adma.202003309 · Cited by 574
High-performance quasi-2D perovskite light-emitting diodes: from materials to devices
Zhang, L., Sun, C., He, T., Jiang, Y., Wei, J., Huang, Y., & Yuan, M. (2021) · Light: Science & Applications · doi:10.1038/s41377-021-00501-0 · Cited by 522
Wang, H., Zhang, X., Wu, Q., Cao, F., Yang, D., Shang, Y., Ning, Z., Zhang, W., Zheng, W., Yan, Y., et al. (2019) · Nature Communications · doi:10.1038/s41467-019-08425-5 · Cited by 504
Self-citationLiu, M., Wan, Q., Wang, H., Carulli, F., Sun, X., Zheng, W., Kong, L., Zhang, Q., Zhang, C., Zhang, Q., et al. (2021) · Nature Photonics · doi:10.1038/s41566-021-00766-2 · Cited by 478
Reducing the impact of Auger recombination in quasi-2D perovskite light-emitting diodes
Jiang, Y., Cui, M., Li, S., Sun, C., Huang, Y., Wei, J., Zhang, L., Lv, M., Qin, C., Liu, Y., et al. (2021) · Nature Communications · doi:10.1038/s41467-020-20555-9 · Cited by 469
Improving the Stability of Metal Halide Perovskite Quantum Dots by Encapsulation
Lv, W., Li, L., Xu, M., Hong, J., Tang, X., Xu, L., Wu, Y., Zhu, R., Chen, R., & Huang, W. (2019) · Advanced Materials · doi:10.1002/adma.201900682 · Cited by 462
A roadmap for the commercialization of perovskite light emitters
Han, T.-H., Jang, K. Y., Dong, Y., Friend, R. H., Sargent, E. H., & Lee, T.-W. (2022) · Nature Reviews Materials · doi:10.1038/s41578-022-00459-4 · Cited by 449
Metal Halide Perovskite Light‐Emitting Devices: Promising Technology for Next‐Generation Displays
Lu, M., Zhang, Y., Wang, S., Guo, J., Yu, W. W., & Rogach, A. L. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201902008 · Cited by 425
High-performance large-area quasi-2D perovskite light-emitting diodes
Sun, C., Jiang, Y., Cui, M., Qiao, L., Wei, J., Huang, Y., Zhang, L., He, T., Li, S., Hsu, H.-Y., et al. (2021) · Nature Communications · doi:10.1038/s41467-021-22529-x · Cited by 327
Zhang, R., Mao, X., Yang, Y., Yang, S., Zhao, W., Wumaier, T., Wei, D., Deng, W., & Han, K. (2019) · Angewandte Chemie International Edition · doi:10.1002/anie.201812865 · Cited by 277
Perovskite QLED with an external quantum efficiency of over 21% by modulating electronic transport
Fang, T., Wang, T., Li, X., Dong, Y., Bai, S., & Song, J. (2021) · Science Bulletin · doi:10.1016/j.scib.2020.08.025 · Cited by 267
Self-citationLuminescent perovskites: recent advances in theory and experiments
Song, Z., Zhao, J., & Liu, Q. (2019) · Inorganic Chemistry Frontiers · doi:10.1039/c9qi00777f · Cited by 259
Perovskite White Light Emitting Diodes: Progress, Challenges, and Opportunities
Chen, J., Xiang, H., Wang, J., Wang, R., Li, Y., Shan, Q., Xu, X., Dong, Y., Wei, C., & Zeng, H. (2021) · ACS Nano · doi:10.1021/acsnano.1c06849 · Cited by 256
Metadata
- Authors
- Han, D., Imran, M., Zhang, M., Chang, S., Wu, X.-G., Zhang, X., Tang, J., Wang, M., Ali, S., Li, X., Yu, G., Han, J., Wang, L., Zou, B., & Zhong, H.
- Venue
- ACS Nano
- Publisher
- American Chemical Society (ACS)
- Published
- 2018-08-06
- Volume
- 12
- Issue
- 8
- Pages
- 8808-8816
- ISSN
- 1936-0851 (ISSN-L)
- 1936-086X
- OpenAlex
- W2887595704
- Cited by
- 298
- References
- 58
- FWCI
- 15.34
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.