The DOI matches its Crossref record; 40 of the 40 references it cites were found in a registry or an index.
Highly Compressible Wood Sponges with a Spring-like Lamellar Structure as Effective and Reusable Oil Absorbents
Abstract
Aerogels derived from nanocellulose have emerged as attractive absorbents for cleaning up oil spills and organic pollutants due to their lightweight, exceptional absorption capacity, and sustainability. However, the majority of the nanocellulose aerogels based on the bottom-up fabrication process still lack sufficient mechanical robustness because of their disordered architecture with randomly assembled cellulose nanofibrils, which is an obstacle to their practical application as oil absorbents. Herein, we report an effective strategy to create anisotropic cellulose-based wood sponges with a special spring-like lamellar structure directly from natural balsa wood. The selective removal of lignin and hemicelluloses via chemical treatment broke the thin cell walls of natural wood, leading to a lamellar structure with wave-like stacked layers upon freeze-drying. A subsequent silylation reaction allowed the growth of polysiloxane coatings on the skeleton surface. The resulting silylated wood sponge exhibited high mechanical compressibility (reversible compression of 60%) and elastic recovery (∼99% height retention after 100 cycles at 40% strain). The wood sponge showed excellent oil/water absorption selectivity with a high oil absorption capacity of 41 g g –1 . Moreover, the absorbed oils can be recovered by simple mechanical squeezing, and the porous sponge maintained a high oil-absorption capacity upon multiple squeezing-absorption cycles, displaying excellent recyclability. Taking advantage of the unidirectional liquid transport of the porous sponge, an oil-collecting device was successfully designed to continuously separate contaminants from water. Such an easy, low-cost, and scalable top-down approach holds great potential for developing effective and reusable oil absorbents for oil/water separation.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Gui, X., Wei, J., Wang, K., Cao, A., Zhu, H., Jia, Y., Shu, Q., & Wu, D. (2010) · Advanced Materials · doi:10.1002/adma.200902986 · Cited by 1,528
Ultralight and Highly Compressible Graphene Aerogels
Hu, H., Zhao, Z., Wan, W., Gogotsi, Y., & Qiu, J. (2013) · Advanced Materials · doi:10.1002/adma.201204530 · Cited by 1,383
Oil/Water Separation with Selective Superantiwetting/Superwetting Surface Materials
Chu, Z., Feng, Y., & Seeger, S. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201405785 · Cited by 1,305
Biomimetic superelastic graphene-based cellular monoliths
Qiu, L., Liu, J. Z., Chang, S. L. Y., Wu, Y., & Li, D. (2012) · Nature Communications · doi:10.1038/ncomms2251 · Cited by 1,250
Ultralight nanofibre-assembled cellular aerogels with superelasticity and multifunctionality
Si, Y., Yu, J., Tang, X., Ge, J., & Ding, B. (2014) · Nature Communications · doi:10.1038/ncomms6802 · Cited by 1,148
Spongy Graphene as a Highly Efficient and Recyclable Sorbent for Oils and Organic Solvents
Bi, H., Xie, X., Yin, K., Zhou, Y., Wan, S., He, L., Xu, F., Banhart, F., Sun, L., & Ruoff, R. S. (2012) · Advanced Functional Materials · doi:10.1002/adfm.201200888 · Cited by 1,010
Plasmonic Wood for High‐Efficiency Solar Steam Generation
Zhu, M., Li, Y., Chen, F., Zhu, X., Dai, J., Li, Y., Yang, Z., Yan, X., Song, J., Wang, Y., et al. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201701028 · Cited by 937
A Versatile, Ultralight, Nitrogen‐Doped Graphene Framework
Zhao, Y., Hu, C., Hu, Y., Cheng, H., Shi, G., & Qu, L. (2012) · Angewandte Chemie International Edition · doi:10.1002/anie.201206554 · Cited by 856
Hydrophobic Nanocellulose Aerogels as Floating, Sustainable, Reusable, and Recyclable Oil Absorbents
Korhonen, J. T., Kettunen, M., Ras, R. H. A., & Ikkala, O. (2011) · ACS Applied Materials & Interfaces · doi:10.1021/am200475b · Cited by 817
All-wood, low tortuosity, aqueous, biodegradable supercapacitors with ultra-high capacitance
Chen, C., Zhang, Y., Li, Y., Dai, J., Song, J., Yao, Y., Gong, Y., Kierzewski, I., Xie, J., & Hu, L. (2017) · Energy & Environmental Science · doi:10.1039/c6ee03716j · Cited by 744
Si, Y., Fu, Q., Wang, X., Zhu, J., Yu, J., Sun, G., & Ding, B. (2015) · ACS Nano · doi:10.1021/nn506633b · Cited by 677
Self-citationBi, H., Yin, Z., Cao, X., Xie, X., Tan, C., Huang, X., Chen, B., Chen, F., Yang, Q., Bu, X., et al. (2013) · Advanced Materials · doi:10.1002/adma.201302435 · Cited by 667
Nanocellulose-based foams and aerogels: processing, properties, and applications
Lavoine, N., & Bergström, L. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta02807e · Cited by 656
Fadeev, A. Y., & McCarthy, T. J. (2000) · Langmuir · doi:10.1021/la000471z · Cited by 626
Magnetically Driven Floating Foams for the Removal of Oil Contaminants from Water
Calcagnile, P., Fragouli, D., Bayer, I. S., Anyfantis, G. C., Martiradonna, L., Cozzoli, P. D., Cingolani, R., & Athanassiou, A. (2012) · ACS Nano · doi:10.1021/nn3012948 · Cited by 613
Zhang, Z., Sèbe, G., Rentsch, D., Zimmermann, T., & Tingaut, P. (2014) · Chemistry of Materials · doi:10.1021/cm5004164 · Cited by 613
Wood-based nanotechnologies toward sustainability
Jiang, F., Li, T., Li, Y., Zhang, Y., Gong, A., Dai, J., Hitz, E., Luo, W., & Hu, L. (2018) · Advanced Materials · doi:10.1002/adma.201703453 · Cited by 599
Robust superhydrophobic polyurethane sponge as a highly reusable oil-absorption material
Zhu, Q., Chu, Y., Wang, Z., Chen, N., Lin, L., Liu, F., & Pan, Q. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta00125c · Cited by 578
Highly Compressible, Anisotropic Aerogel with Aligned Cellulose Nanofibers
Song, J., Chen, C., Yang, Z., Kuang, Y., Li, T., Li, Y., Huang, H., Kierzewski, I., Liu, B., He, S., et al. (2018) · ACS Nano · doi:10.1021/acsnano.7b04246 · Cited by 536
Bioinspired wood nanotechnology for functional materials
Berglund, L. A., & Burgert, I. (2018) · Advanced Materials · doi:10.1002/adma.201704285 · Cited by 518
Chen, F., Gong, A. S., Zhu, M., Chen, G., Lacey, S. D., Jiang, F., Li, Y., Wang, Y., Dai, J., Yao, Y., et al. (2017) · ACS Nano · doi:10.1021/acsnano.7b01350 · Cited by 486
A Superhydrophobic Sponge with Excellent Absorbency and Flame Retardancy
Ruan, C., Ai, K., Li, X., & Lu, L. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201400775 · Cited by 480
Hayase, G., Kanamori, K., Fukuchi, M., Kaji, H., & Nakanishi, K. (2013) · Angewandte Chemie International Edition · doi:10.1002/anie.201207969 · Cited by 459
Super-elastic and fatigue resistant carbon material with lamellar multi-arch microstructure
Gao, H.-L., Zhu, Y.-B., Mao, L.-B., Wang, F.-C., Luo, X.-S., Liu, Y.-Y., Lu, Y., Pan, Z., Ge, J., Shen, W., et al. (2016) · Nature Communications · doi:10.1038/ncomms12920 · Cited by 455
Electrospun nanofibrous materials: a versatile medium for effective oil/water separation
Wang, X., Yu, J., Sun, G., & Ding, B. (2016) · Materials Today · doi:10.1016/j.mattod.2015.11.010 · Cited by 448
Self-citationWu, L., Li, L., Li, B., Zhang, J., & Wang, A. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/am5091353 · Cited by 443
Surface Modification of Bacterial Cellulose Aerogels’ Web-like Skeleton for Oil/Water Separation
Sai, H., Fu, R., Xing, L., Xiang, J., Li, Z., Li, F., & Zhang, T. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b00846 · Cited by 436
Cellulose Aerogel from Paper Waste for Crude Oil Spill Cleaning
Nguyen, S. T., Feng, J., Le, N. T., Le, A. T. T., Hoang, N., Tan, V. B. C., & Duong, H. M. (2013) · Industrial & Engineering Chemistry Research · doi:10.1021/ie4032567 · Cited by 380
Review on the Aerogel-Type Oil Sorbents Derived from Nanocellulose
Liu, H., Geng, B., Chen, Y., & Wang, H. (2017) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.6b02301 · Cited by 347
Li, T., Zhu, M., Yang, Z., Song, J., Dai, J., Yao, Y., Luo, W., Pastel, G., Yang, B., & Hu, L. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201601122 · Cited by 345
Zhang, W., Liu, N., Cao, Y., Lin, X., Liu, Y., & Feng, L. (2017) · Advanced Materials Interfaces · doi:10.1002/admi.201700029 · Cited by 281
Hydrophobic Modification on Surface of Chitin Sponges for Highly Effective Separation of Oil
Duan, B., Gao, H., He, M., & Zhang, L. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am505414y · Cited by 266
Ultralight, Flexible, and Fire‐Resistant Carbon Nanofiber Aerogels from Bacterial Cellulose
Wu, Z., Li, C., Liang, H., Chen, J., & Yu, S. (2013) · Angewandte Chemie · doi:10.1002/ange.201209676 · Cited by 254
Zhang, A., Chen, M., Du, C., Guo, H., Bai, H., & Li, L. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am4029203 · Cited by 231
Jiang, F., & Hsieh, Y.-L. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b13577 · Cited by 195
Facile Preparation of the Porous PDMS Oil‐Absorbent for Oil/Water Separation
Yu, C., Yu, C., Cui, L., Song, Z., Zhao, X., Ma, Y., & Jiang, L. (2016) · Advanced Materials Interfaces · doi:10.1002/admi.201600862 · Cited by 188
Flexible, Mechanically Durable Aerogel Composites for Oil Capture and Recovery
Karatum, O., Steiner, S. A., Griffin, J. S., Shi, W., & Plata, D. L. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b08439 · Cited by 125
Renewable, Biomass-Derived, Honeycomblike Aerogel As a Robust Oil Absorbent with Two-Way Reusability
Jiang, J., Zhang, Q., Zhan, X., & Chen, F. (2017) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.7b02333 · Cited by 113
Removal of Organic Pollutants from Water Using Superwetting Materials
Li, L., Zhang, J., & Wang, A. (2017) · The Chemical Record · doi:10.1002/tcr.201700029 · Cited by 88
Chen, W., Zhang, Q., Uetani, K., Li, Q., Lü, P., Cao, J., Wang, Q., Li, P., Li, J., Quan, Z., et al. (2016) · Advanced Materials Interfaces · doi:10.1002/admi.201600004 · Cited by 64
Cited by
A state-of-the-art review on wastewater treatment techniques: The effectiveness of adsorption method
Rashid, R., Shafiq, I., Akhter, P., Iqbal, M. J., & Hussain, M. (2021) · Environmental Science and Pollution Research · doi:10.1007/s11356-021-12395-x · Cited by 1,315
Structure–property–function relationships of natural and engineered wood
Chen, C., Kuang, Y., Zhu, S., Burgert, I., Keplinger, T., Gong, A., Li, T., Berglund, L., Eichhorn, S. J., & Hu, L. (2020) · Nature Reviews Materials · doi:10.1038/s41578-020-0195-z · Cited by 1,295
Cellulose: A Review of Water Interactions, Applications in Composites, and Water Treatment
Etale, A., Onyianta, A. J., Turner, S. R., & Eichhorn, S. J. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00477 · Cited by 817
Jia, C., Li, L., Liu, Y., Fang, B., Ding, H., Song, J., Liu, Y., Xiang, K., Lin, S., Li, Z., et al. (2020) · Nature Communications · doi:10.1038/s41467-020-17533-6 · Cited by 412
Multifunctional Superelastic Cellulose Nanofibrils Aerogel by Dual Ice‐Templating Assembly
Qin, H., Zhang, Y., Jiang, J., Wang, L., Song, M., Bi, R., Zhu, P., & Jiang, F. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202106269 · Cited by 340
Metadata
- Authors
- Guan, H., Cheng, Z., & Wang, X.
- Venue
- ACS Nano
- Publisher
- American Chemical Society (ACS)
- Published
- 2018-10-01
- Volume
- 12
- Issue
- 10
- Pages
- 10365-10373
- ISSN
- 1936-0851 (ISSN-L)
- 1936-086X
- OpenAlex
- W2893671971
- Cited by
- 666
- References
- 40
- FWCI
- 15.17
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.