The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
High-Performance All-Inorganic CsPbCl3 Perovskite Nanocrystal Photodetectors with Superior Stability
Abstract
All-inorganic perovskites nanostructures, such as CsPbCl 3 nanocrystals (NCs), are promising in many applications including light-emitting diodes, photovoltaics, and photodetectors. Despite the impressive performance that was demonstrated, a critical issue remains due to the instability of the perovskites in ambient. Herein, we report a method of passivating crystalline CsPbCl 3 NC surfaces with 3-mercaptopropionic acid (MPA), and superior ambient stability is achieved. The printing of these colloidal NCs on the channel of graphene field-effect transistors (GFETs) on solid Si/SiO 2 and flexible polyethylene terephthalate substrates was carried out to obtain CsPbCl 3 NCs/GFET heterojunction photodetectors for flexible and visible-blind ultraviolet detection at wavelength below 400 nm. Besides ambient stability, the additional benefits of passivating surface charge trapping by the defects on CsPbCl 3 NCs and facilitating high-efficiency charge transfer between the CsPbCl 3 NCs and graphene were provided by MPA. Extraordinary optoelectronic performance was obtained on the CsPbCl 3 NCs/graphene devices including a high ultraviolet responsivity exceeding 10 6 A/W, a high detectivity of 2 × 10 13 Jones, a fast photoresponse time of 0.3 s, and ambient stability with less than 10% degradation of photoresponse after 2400 h. This result demonstrates the crucial importance of the perovskite NC surface passivation not only to the performance but also to the stability of the perovskite optoelectronic devices.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Genesis, challenges and opportunities for colloidal lead halide perovskite nanocrystals
Akkerman, Q. A., Rainò, G., Kovalenko, M. V., & Manna, L. (2018) · Nature Materials · doi:10.1038/s41563-018-0018-4 · Cited by 2,287
Cited by
Doping and ion substitution in colloidal metal halide perovskite nanocrystals
Lu, C.-H., Biesold-McGee, G. V., Liu, Y., Kang, Z., & Lin, Z. (2020) · Chemical Society Reviews · doi:10.1039/c9cs00790c · Cited by 484
2D Materials in Flexible Electronics: Recent Advances and Future Prospectives
Katiyar, A. K., Hoang, A. T., Xu, D., Hong, J., Kim, B. J., Ji, S., & Ahn, J.-H. (2024) · Chemical Reviews · doi:10.1021/acs.chemrev.3c00302 · Cited by 363
Visible Light Communication system using an organic emitter and a perovskite photodetector
López-Fraguas, E., Arredondo, B., Vega-Colado, C., Pozo, G. D., Najafi, M., Martín-Martín, D., Galagan, Y., Sánchez-Pena, J. M., Vergaz, R., & Romero, B. (2019) · Organic Electronics · doi:10.1016/j.orgel.2019.06.028 · Cited by 40
Hu, Z., Zhang, B., Zhang, F., Guo, X., Lin, Z., Zhang, J., Hao, Y., & Chang, J. (2023) · Science China Materials · doi:10.1007/s40843-023-2487-3 · Cited by 21
Metadata
- Authors
- Gong, M., Sakidja, R., Goul, R., Ewing, D., Casper, M., Stramel, A., Elliot, A., & Wu, J. Z.
- Venue
- ACS Nano
- Publisher
- American Chemical Society (ACS)
- Published
- 2019-02-04
- Volume
- 13
- Issue
- 2
- Pages
- 1772-1783
- ISSN
- 1936-0851 (ISSN-L)
- 1936-086X
- OpenAlex
- W2913754762
- Cited by
- 178
- References
- 1
- FWCI
- 11.46
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.