The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Shape-Adaptable 2D Titanium Carbide (MXene) Heater
Abstract
Prior to the advent of the next-generation heater for wearable/on-body electronic devices, various properties are required, including conductivity, transparency, mechanical reliability, and conformability. Expansion to two-dimensional (2D) structure of metallic nanowires based on network- and mesh-type geometries has been widely exploited for realizing these heaters. However, the routes led to many drawbacks such as the low-density cross-bar linking, self-aggregation of wire, and high junction resistance. Although 2D carbon nanomaterials such as graphene and reduced graphene oxide (rGO) have shown their potentials for the purpose, CVD-grown graphene with sufficiently high conductivity was limited due to its poor processability for large-area applications, while rGO fabricated with a complex reduction process involving the use of toxic chemicals suffered from a low electrical conductivity. In this study, we demonstrate a simple and robust process, utilizing electrostatic assembling of negatively charged MXene flakes on a positively treated surface of substrate, for fabricating a metal-like 2D MXene thin film heater (TFH). Our TFH showed a high optical property (>65%), low sheet resistance (215 Ω/sq), fast electrothermal response (within dozens of seconds) with an intrinsically high electrical conductivity, and mechanical flexibility (up to 180° bending). Its capability for forming a firm and stable ionic-type interface with a counterpart surface allows us to develop a shape-adaptable and patchable thread heater (TH) that can be shaped on diverse substrates even under harsh conditions of conventional sewing or weaving processes. This work suggests that our shape-adaptable MXene heaters are potentially suitable not only for wearable devices for local heating and defrosting but also for a variety of emerging applications of soft actuators and wearable/flexible healthcare monitoring and thermotherapy.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Lee, H., Choi, T. K., Lee, Y. B., Cho, H. R., Ghaffari, R., Wang, L., Choi, H. J., Chung, T. D., Lu, N., Hyeon, T., et al. (2016) · Nature Nanotechnology · doi:10.1038/nnano.2016.38 · Cited by 1,802
Synthesis and thermal stability of two-dimensional carbide MXene Ti3C2
Li, Z., Wang, L., Sun, D., Zhang, Y., Liu, B., Hu, Q., & Zhou, A. (2015) · Materials Science and Engineering: B · doi:10.1016/j.mseb.2014.10.009 · Cited by 928
Choi, S., Park, J., Hyun, W., Kim, J., Kim, J., Lee, Y. B., Song, C., Hwang, H. J., Kim, J. H., Hyeon, T., et al. (2015) · ACS Nano · doi:10.1021/acsnano.5b02790 · Cited by 568
Self-citation
Cited by
Flexible MXene‐Based Composites for Wearable Devices
Ma, C., Ma, M., Si, C., Ji, X., & Wan, P. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202009524 · Cited by 544
Improving oxidation stability of 2D MXenes: synthesis, storage media, and conditions
Iqbal, A., Hong, J., Ko, T. Y., & Koo, C. M. (2021) · Nano Convergence · doi:10.1186/s40580-021-00259-6 · Cited by 534
Self-citationZhao, X., Wang, L.-Y., Tang, C.-Y., Zha, X.-J., Liu, Y., Su, B.-H., Ke, K., Bao, R.-Y., Yang, M.-B., & Yang, W. (2020) · ACS Nano · doi:10.1021/acsnano.0c03391 · Cited by 511
Ma, Z., Xiang, X., Shao, L., Zhang, Y., & Gu, J. (2022) · Angewandte Chemie International Edition · doi:10.1002/anie.202200705 · Cited by 497
Luo, J., Gao, S., Luo, H., Wang, L., Huang, X., Guo, Z., Lai, X., Lin, L., Li, R. K. Y., & Gao, J. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.126898 · Cited by 483
2D Transition Metal Carbides (MXenes): Applications as an Electrically Conducting Material
Shahzad, F., Iqbal, A., Kim, H., & Koo, C. M. (2020) · Advanced Materials · doi:10.1002/adma.202002159 · Cited by 451
Self-citationLee, G. S., Yun, T., Kim, H., Kim, I. H., Choi, J., Lee, S. H., Lee, H. J., Hwang, H. S., Kim, J. G., Kim, D.-W., et al. (2020) · ACS Nano · doi:10.1021/acsnano.0c04411 · Cited by 405
Self-citationPerspectives on solution processing of two-dimensional MXenes
Abdolhosseinzadeh, S., Jiang, X., Zhang, H., Qiu, J., & Zhang, C. (. (2021) · Materials Today · doi:10.1016/j.mattod.2021.02.010 · Cited by 386
Fan, X., Yang, Y., Shi, X., Liu, Y., Li, H., Liang, J., & Chen, Y. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202007110 · Cited by 366
MXene as emerging nanofillers for high-performance polymer composites: A review
Gong, K., Zhou, K., Qian, X., Shi, C., & Yu, B. (2021) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2021.108867 · Cited by 362
Oxidation-resistant titanium carbide MXene films
Lee, Y., Kim, S. J., Kim, Y.-J., Lim, Y., Chae, Y., Lee, B.-J., Kim, Y.-T., Han, H., Gogotsi, Y., & Ahn, C. W. (2020) · Journal of Materials Chemistry A · doi:10.1039/c9ta07036b · Cited by 357
Zhou, B., Su, M., Yang, D., Han, G., Feng, Y., Wang, B., Ma, J., Ma, J., Liu, C., & Shen, C. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c09020 · Cited by 330
MXene‐Based Fibers, Yarns, and Fabrics for Wearable Energy Storage Devices
Levitt, A., Zhang, J., Dion, G., Gogotsi, Y., & Razal, J. M. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202000739 · Cited by 328
Surface Modification of a MXene by an Aminosilane Coupling Agent
Riazi, H., Anayee, M., Hantanasirisakul, K., Shamsabadi, A. A., Anasori, B., Gogotsi, Y., & Soroush, M. (2020) · Advanced Materials Interfaces · doi:10.1002/admi.201902008 · Cited by 316
MXene/Polymer Nanocomposites: Preparation, Properties, and Applications
Chen, X., Zhao, Y., Li, L., Wang, Y., Wang, J., Xiong, J., Du, S., Zhang, P., Shi, X., & Yu, J. (2021) · Polymer Reviews · doi:10.1080/15583724.2020.1729179 · Cited by 279
Optimizing Ion Pathway in Titanium Carbide MXene for Practical High‐Rate Supercapacitor
Tang, J., Mathis, T., Zhong, X., Xiao, X., Wang, H., Anayee, M., Pan, F., Xu, B., & Gogotsi, Y. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202003025 · Cited by 278
Recent progress on multifunctional electromagnetic interference shielding polymer composites
Tian, K., Hu, D., Wei, Q., Fu, Q., & Deng, H. (2023) · Journal of Materials Science & Technology · doi:10.1016/j.jmst.2022.06.031 · Cited by 275
Metadata
- Authors
- Park, T. H., Yu, S., Koo, M., Kim, H., Kim, E. H., Park, J.-E., Ok, B., Kim, B., Noh, S. H., Park, C., Kim, E., Koo, C. M., & Park, C.
- Venue
- ACS Nano
- Publisher
- American Chemical Society (ACS)
- Published
- 2019-05-22
- Volume
- 13
- Issue
- 6
- Pages
- 6835-6844
- ISSN
- 1936-0851 (ISSN-L)
- 1936-086X
- OpenAlex
- W2946186925
- Cited by
- 227
- References
- 3
- FWCI
- 10.85
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.