The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Robust Lithium Metal Anodes Realized by Lithiophilic 3D Porous Current Collectors for Constructing High-Energy Lithium–Sulfur Batteries
Abstract
Lithium–sulfur (Li–S) batteries are attractive candidates for next-generation rechargeable batteries. With the steady development of sulfur cathodes, the recent revival of research on dendrite-free Li metal anodes offers opportunities to improve the stabilities and safety of Li–S batteries. However, the low capacities and low Li utilizations of current Li anodes hinder the improvement of the energy densities of Li–S batteries. Here, we present a facile approach to fabricate lithiophilic three-dimensional porous current collectors by modifying commercial metal foams with yolk–shell structured N-doped porous carbon nanosheets. Benefiting from the structure-based rational design, this current collector is able to generate dendrite-free Li anodes with improved Coulombic efficiencies and life spans, enabling carbon/sulfur cathodes to exhibit significantly enhanced stabilities ( e . g ., 78.1% of capacity retention after 1400 cycles). More importantly, we successfully constructed a high-areal-capacity Li–S full cell (9.84 mAh cm –2 ) with 82% Li utilization. This work provides a promising route toward high-energy-density Li–S batteries.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Reviving the lithium metal anode for high-energy batteries
Lin, D., Liu, Y., & Cui, Y. (2017) · Nature Nanotechnology · doi:10.1038/nnano.2017.16 · Cited by 6,763
Cited by
Advances in Lithium–Sulfur Batteries: From Academic Research to Commercial Viability
Chen, Y., Wang, T., Tian, H., Su, D., Zhang, Q., & Wang, G. (2021) · Advanced Materials · doi:10.1002/adma.202003666 · Cited by 870
Zhang, C. (., Ma, Y., Zhang, X., Abdolhosseinzadeh, S., Sheng, H., Lan, W., Pakdel, A., Heier, J., & Nüesch, F. (2020) · ENERGY & ENVIRONMENTAL MATERIALS · doi:10.1002/eem2.12058 · Cited by 605
Yao, W., Xu, J., Ma, L., Lu, X., Luo, D., Qian, J., Zhan, L., Manke, I., Yang, C., Adelhelm, P., et al. (2023) · Advanced Materials · doi:10.1002/adma.202212116 · Cited by 317
Strategies to anode protection in lithium metal battery: A review
Li, J., Kong, Z., Liu, X., Zheng, B., Fan, Q. H., Garratt, E., Schuelke, T., Wang, K., Xu, H., & Jin, H. (2021) · InfoMat · doi:10.1002/inf2.12189 · Cited by 267
Metadata
- Authors
- Pei, F., Fu, A., Ye, W., Peng, J., Fang, X., Wang, M.-S., & Zheng, N.
- Venue
- ACS Nano
- Publisher
- American Chemical Society (ACS)
- Published
- 2019-07-09
- Volume
- 13
- Issue
- 7
- Pages
- 8337-8346
- ISSN
- 1936-0851 (ISSN-L)
- 1936-086X
- OpenAlex
- W2956228928
- Cited by
- 185
- References
- 1
- FWCI
- 10.49
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.