The DOI matches its Crossref record; 48 of the 48 references it cites were found in a registry or an index.
Wood-Based Flexible Electronics
Open accessAbstract
., substrate and conductor) need to be high performance, multifunctional, and environmentally friendly. Here, we report the creation of a fully wood-based flexible electronics circuit meeting these requirements, where the substrate, a strong, flexible and transparent wood film, is printed with a lignin-derived carbon nanofibers conductive ink. The wood film fabrication involves extensive removal of lignin and hemicellulose to tailor the nanostructure of the material followed by collapsing of the cell walls. This process preserves the original alignment of the cellulose nanofibers and promotes their binding. The film is flexible, yet strong in fiber direction with a Young's modulus and a tensile strength of 49.9 GPa and 469.9 MPa, respectively. Furthermore, a sustainable and bio-based conductive ink is formulated with lignin-derived carbon nanofibers. The bio-based ink is printed on transparent wood film, and a strain sensor application of the printed circuit is demonstrated. Combining the transparent wood film with the conductive ink produces environmental friendly and sustainable wood-based electronics for potential applications such as flexible circuits and sensors. Moreover, we envision the potential for a scalable and continuous fabrication process as well as end-of-life recyclability.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Composites reinforced with cellulose based fibres
Bledzki, A. (1999) · Progress in Polymer Science · doi:10.1016/s0079-6700(98)00018-5 · Cited by 4,696
Dissolvable films of silk fibroin for ultrathin conformal bio-integrated electronics
Kim, D.-H., Viventi, J., Amsden, J. J., Xiao, J., Vigeland, L., Kim, Y.-S., Blanco, J. A., Panilaitis, B., Frechette, E. S., Contreras, D., et al. (2010) · Nature Materials · doi:10.1038/nmat2745 · Cited by 1,721
Processing bulk natural wood into a high-performance structural material
Song, J., Chen, C., Zhu, S., Zhu, M., Dai, J., Ray, U., Li, Y., Kuang, Y., Li, Y., Quispe, N., et al. (2018) · Nature · doi:10.1038/nature25476 · Cited by 1,632
Wood-Derived Materials for Green Electronics, Biological Devices, and Energy Applications
Zhu, H., Luo, W., Ciesielski, P. N., Fang, Z., Zhu, J. Y., Henriksson, G., Himmel, M. E., & Hu, L. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00225 · Cited by 1,532
Cellulose Nanopaper Structures of High Toughness
Henriksson, M., Berglund, L. A., Isaksson, P., Lindström, T., & Nishino, T. (2008) · Biomacromolecules · doi:10.1021/bm800038n · Cited by 1,299
Optically Transparent Nanofiber Paper
Nogi, M., Iwamoto, S., Nakagaito, A. N., & Yano, H. (2009) · Advanced Materials · doi:10.1002/adma.200803174 · Cited by 1,074
Handbook of Wood Chemistry and Wood Composites
(2012) · CRC Press eBooks · doi:10.1201/b12487 · Cited by 917
High-performance green flexible electronics based on biodegradable cellulose nanofibril paper
Jung, Y. H., Chang, T.-H., Zhang, H., Yao, C., Zheng, Q., Yang, V. W., Mi, H., Kim, M., Cho, S. J., Park, D.-W., et al. (2015) · Nature Communications · doi:10.1038/ncomms8170 · Cited by 891
Wood-based nanotechnologies toward sustainability
Jiang, F., Li, T., Li, Y., Zhang, Y., Gong, A., Dai, J., Hitz, E., Luo, W., & Hu, L. (2018) · Advanced Materials · doi:10.1002/adma.201703453 · Cited by 599
Li, Y., Fu, Q., Yu, S., Yan, M., & Berglund, L. (2016) · Biomacromolecules · doi:10.1021/acs.biomac.6b00145 · Cited by 570
Self-citation
Metadata
- Authors
- Fu, Q., Chen, Y., & Sorieul, M.
- Venue
- ACS Nano
- Publisher
- American Chemical Society (ACS)
- Published
- 2020-02-28
- Volume
- 14
- Issue
- 3
- Pages
- 3528-3538
- ISSN
- 1936-0851 (ISSN-L)
- 1936-086X
- OpenAlex
- W3006939917
- Cited by
- 269
- References
- 48
- FWCI
- 12.74
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Wood-Based Flexible Electronics. https://app.cochat.ai/papers/10.1021/acsnano.9b09817
- The paper
- Fu, Q., Chen, Y., & Sorieul, M. (2020). Wood-Based Flexible Electronics. ACS Nano. https://doi.org/10.1021/acsnano.9b09817
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
