Thermogravimetric and Kinetic Analysis of Co-Combustion of Waste Tires and Coal Blends
Open accessThe DOI matches its Crossref record; 31 of the 31 references it cites were found in a registry or an index.
Abstract
The waste tire is a fuel with the potential to partially replace coal due to the high heat value. In the present study, the combustion characteristics of the tire powders, bituminous coal, and their blends were examined using the thermogravimetric analyzer. The influence of heating rate on tire powders combustion and the burnout characteristics of their blends were studied. The increase of the heating rate caused the combustion temperature of the tire powders to become high but reduced the maximum weight loss rate. The combustion characteristics of the blends of coal and tire powders approached the combination of those of the individual sample, suggesting that the interaction effects between coal and tire powders were slight. Furthermore, the influence of different ratios on ignition characteristics, burnout temperature, and combustion effect of the blends was studied at the optimal combustion rate. The addition of tire powders improved the ignition characteristics, reduced the burnout temperature and increased the burnout rate of coal to a certain extent. An increase in the proportion of tire powders led to a decrease in the activation energy in the temperature range of 349-465 °C, whereas it caused an increase from 465 °C to burnout, which could be attributed to the fact that the volatile matter was more combustible than fixed carbon within 349-465 °C, and the combustion effect of fixed carbon in the tire powders gradually manifested in the combustion from 465 °C to burnout when the tire powders content increased.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures







Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“Tire-derived fuel (TDF) is commonly utilized as an alternative solid fuel in energy-intensive industrial applications such as cement kilns, where its co-processing with traditional fuels like coal is rationalized by its high calorific value, its potential to reduce net GHG emissions compared to conventional fossil fuels under optimized conditions, and its role in diverting a problematic waste”
From Biofuels, E-Fuels, and Waste-Derived Fuels: Advances, Challenges, and Future Directions (2025) · cites this paper as [339]
Experimental — accuracy not yet measuredThe cited source says what the claim attributes to it.
In the citing paper
“Waste tires typically possess a high carbon content, often exceeding 80% on a dry basis, and a high heating value in the range of 30-40 MJ/kg, which is comparable to or even higher than that of traditional solid fuels like coal [339,340].”
From Biofuels, E-Fuels, and Waste-Derived Fuels: Advances, Challenges, and Future Directions (2025) · cites this paper as [339]
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Kinetic Parameters from Thermogravimetric Data
COATS, A. W., & REDFERN, J. P. (1964) · Nature · doi:10.1038/201068a0 · Cited by 6,930
Martínez, J. D., Puy, N., Murillo, R., García, T., Navarro, M. V., & Mastral, A. M. (2013) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2013.02.038 · Cited by 849
Progress in used tyres management in the European Union: A review
Sienkiewicz, M., Kucinska-Lipka, J., Janik, H., & Balas, A. (2012) · Waste Management · doi:10.1016/j.wasman.2012.05.010 · Cited by 559
Recycling of waste tire rubber as aggregate in concrete: durability-related performance
Thomas, B. S., Gupta, R. C., & Panicker, V. J. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.08.046 · Cited by 486
Pyrolysis and combustion kinetics of date palm biomass using thermogravimetric analysis
Sait, H. H., Hussain, A., Salema, A. A., & Ani, F. N. (2012) · Bioresource Technology · doi:10.1016/j.biortech.2012.04.081 · Cited by 404
The pyrolysis of scrap automotive tyres
Williams, P. T., Besler, S., & Taylor, D. T. (1990) · Fuel · doi:10.1016/0016-2361(90)90193-t · Cited by 378
Use of pyrolytic gas from waste tire as a fuel: A review
Czajczyńska, D., Krzyżyńska, R., Jouhara, H., & Spencer, N. (2017) · Energy · doi:10.1016/j.energy.2017.05.042 · Cited by 333
Thermogravimetric analysis and kinetics of co-pyrolysis of raw/torrefied wood and coal blends
Lu, K.-M., Lee, W.-J., Chen, W.-H., & Lin, T.-C. (2013) · Applied Energy · doi:10.1016/j.apenergy.2012.12.050 · Cited by 327
Treatment and disposal of tyres: Two EU approaches. A review
Torretta, V., Rada, E. C., Ragazzi, M., Trulli, E., Istrate, I. A., & Cioca, L. I. (2015) · Waste Management · doi:10.1016/j.wasman.2015.04.018 · Cited by 308
Pyrolysis-thermogravimetric analysis of tyres and tyre components
Williams, P. T., & Besler, S. (1995) · Fuel · doi:10.1016/0016-2361(95)00083-h · Cited by 283
Research works printed but not linked: 8
- Klingensmith W., 1998, Rubber World, 4, 41
- Mennig G., 1998, Plast., Rubber Compos. Process. Appl., 27, 346
- Gronowicz J., 2007, Probl. Eksploat., 2, 5
- Marks J., 1991, Power Eng., 8, 35
- Jones R. M., 1990, Tappi, 5, 107
- Sun R., 2016, Chin. J. Process Eng., 16, 966
- Gu X. H., 2017, Coal Chem. Ind., 45, 66
- Sui Y., 2017, China Rubber/Plast. Technol. Equip., 43, 39
Cited by
200 years of Portland cement: Technological advancements and sustainability challenges
Chen, H., Li, N., Unluer, C., Chen, P., & Zhang, Z. (2024) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2024.144500 · Cited by 60
Advances in recycling of waste vulcanized rubber products via different sustainable approaches
Kumar, A., Dhanorkar, R. J., Mohanty, S., & Gupta, V. K. (2024) · Materials Advances · doi:10.1039/d4ma00379a · Cited by 50
Biofuels, E-Fuels, and Waste-Derived Fuels: Advances, Challenges, and Future Directions
Yılbaşı, Z. (2025) · Sustainability · doi:10.3390/su17136145 · Cited by 41
He, Y., Chen, X., Tang, X., Chen, S., Evrendilek, F., Chen, T., Dai, W., & Liu, J. (2022) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2022.109196 · Cited by 37
Studies on the Thermochemical Conversion of Waste Tyre Rubber—A Review
Soprych, P., Czerski, G., & Grzywacz, P. (2023) · Energies · doi:10.3390/en17010014 · Cited by 29
Recent developments of waste tires derived multifunctional carbonaceous nanomaterials
Jiang, G., Pan, J., Che, K., Deng, W., Sun, Y., Wu, Y., Yuan, H. R., Gu, J., Gu, Y., Zhang, W., et al. (2023) · Materials Today Sustainability · doi:10.1016/j.mtsust.2023.100576 · Cited by 35
Zhang, Z., Huang, Y., Wang, R., Gu, L., Zhu, Z., Yu, M., Yang, X., & Yang, L. (2021) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2021.106365 · Cited by 23
Self-citationPyrolysis and Oxidation of Waste Tire Oil: Analysis of Evolved Gases
Jameel, A. G. A., Alquaity, A. B. S., Islam, K. M. O., Pasha, A. A., Khan, S., Nemitallah, M. A., & Ahmed, U. (2022) · ACS Omega · doi:10.1021/acsomega.2c01366 · Cited by 20
Valorization of Biomass and Industrial Wastes as Alternative Fuels for Sustainable Cement Production
Sasso, O. R., Carreño-Gallardo, C., Castillo, D. M. S., Farias, O. F. O., Carrillo, M. B., Gómez, C. P., & Ramírez, J. M. H. (2024) · Clean Technologies · doi:10.3390/cleantechnol6020042 · Cited by 19
“The results of the proximate, elemental, and physical analyses of TDF uncover similarities with those of waste tire studies [42,43].”
ResultFire Resistance Evaluation of New Wooden Composites Containing Waste Rubber from Automobiles
Mancel, V., Čabalová, I., Krilek, J., Réh, R., Zachar, M., & Jurczyková, T. (2022) · Polymers · doi:10.3390/polym14204465 · Cited by 18
“[46], the ignition temperature of tire powders was 349.”
BackgroundProcessing, Mechanical and Morphological Properties of GTR Modified by SBS Copolymers
Susik, A., Rodak, A., Cañavate, J., Colom, X., Wang, S., & Formela, K. (2023) · Materials · doi:10.3390/ma16051788 · Cited by 15
“Although waste tires are not easy to ignite, their fires are very difficult to extinguish due to the high calorific value of tires, around 30–40 MJ/kg, which is higher than those of coal and other solid fuels [5].”
BackgroundZhang, X., Liu, L., Lang, B., Xia, L., Lin, R., & Wang, X. (2022) · Fuel · doi:10.1016/j.fuel.2022.127034 · Cited by 14
Xian, L., Lu, D., Yang, Y., Feng, J., Fang, J., Jacobs, D. F., Wu, D., & Zeng, S. (2024) · Scientific Reports · doi:10.1038/s41598-024-64163-9 · Cited by 12
Yin, Y., Tu, J., Wu, Z., Wang, T., Rahman, M. M., Shakir, M., Qing, M., Chen, Z., Ni, B., Xuan, Y., et al. (2025) · Energy · doi:10.1016/j.energy.2025.136071 · Cited by 8
Czaplicka, M., Klyta, J., Komosiński, B., Konieczny, T., & Janoszka, K. (2021) · Energies · doi:10.3390/en14175326 · Cited by 9
Sasso, O. R., Carreño-Gallardo, C., Ledezma-Sillas, J. E., Hernandez, F. C. R., Farias, O. F. O., Gómez, C. P., & Ramírez, J. M. H. (2025) · Energies · doi:10.3390/en18092337 · Cited by 7
Lan, Y., Jin, S., Wang, J., Wang, X., Zhang, R., Ling, L., & Jin, M. (2022) · Processes · doi:10.3390/pr10081635 · Cited by 8
Thermo-kinetic Study of Genetically Different Carbon-Source Materials
Saini, R. K., Barma, S. D., Rao, D. S., Basu, S., & Mahajani, S. M. (2023) · ACS Omega · doi:10.1021/acsomega.3c06035 · Cited by 7
Santiago, J. R., Sekito, T., & Dote, Y. (2022) · Journal of Material Cycles and Waste Management · doi:10.1007/s10163-022-01572-w · Cited by 5
Ruan, J., Liu, Z., Gao, K., She, L., Liu, J., Guo, Y., & Zhang, F. (2024) · Chemosphere · doi:10.1016/j.chemosphere.2024.143834 · Cited by 4
Luo, C., Huang, L., Chen, Y., Wang, Z., Ren, H., Liu, H., & Liu, Z. (2022) · RSC Advances · doi:10.1039/d1ra07685j · Cited by 4
Santiago, J. R., Sekito, T., & Dote, Y. (2023) · Minerals · doi:10.3390/min13060823 · Cited by 4
Anis, S., Sukarni, S., Alavudeen, A., Siswantara, A. I., Maulana, S., Fitriyana, D. F., Kusumastuti, A., Siregar, J. P., Palanisamy, S., Alagarsamy, A., et al. (2025) · RSC Sustainability · doi:10.1039/d5su00712g · Cited by 3
Zaib, Q., Park, S., Behera, S. K., Mahanty, B., Zafar, M., Park, H., & Kyung, D. (2023) · Environmental Science and Pollution Research · doi:10.1007/s11356-023-30471-2 · Cited by 1
“The co-combustion of waste tires with low-quality coal offers improved ignition characteristics (Zaharia et al. 2009; Pan et al. 2021).”
BackgroundTiwari, A., & Chinthala, M. (2026) · Bioresource Technology Reports · doi:10.1016/j.biteb.2026.102730 · Cited by 4
Umdagas, L. B., Kings, I., & Al‐Duri, B. (2026) · Chemical Engineering Journal Green and Sustainable · doi:10.1016/j.cejgas.2026.100113 · Cited by 1
RECICLAGEM DE PNEUS INSERVÍVEIS VIA PCI: ESTUDO DA COMBUSTIBILIDADE DE MISTURAS COM CARVÃO MINERAL
Viegas, F. F. S., SILVA, J. A. M. D., da Silva, T. R., AMARAL, C. A. B. D., Lima, G. P. K., Osório, E., Fragoso, H. A. P., FLORES, B., & Vilela, A. C. F. (2024) · ABM Proceedings · doi:10.5151/2594-4711-41195
Lima, G. P. K., Fragoso, H. A. P., Pohlmann, J. G., Vilela, A. C. F., & Osório, E. (2025) · Tecnologia em Metalurgia Materiais e Mineração · doi:10.4322/2176-1523.20253187
“While the study of waste tire behavior in a thermobalance [10-13] may appear extensively investigated, the reality is that the body of literature concerning the study of waste tire mixtures with pulverized coal, specifically targeting the PCI route, remains relatively sparse when compared to other…”
InfluentialStander, A. J., Masha, M. A., Teke, G. M., Farzad, S., Knoetze, J. H., Schwarz, C. E., & Görgens, J. F. (2025) · Journal of the Energy Institute · doi:10.1016/j.joei.2025.102394
Pyrolysis kinetics and thermal characteristics of rice husk‐derived bioplastic films
Yiga, V. A., Subramaniyan, S., & Lubwama, M. (2026) · Polymer International · doi:10.1002/pi.70160
Li, W., Ren, Q., Huang, R., Yuan, A., Mao, C., Xie, S., Zhou, C., Wu, H., & Yang, H. (2026) · SSRN Electronic Journal · doi:10.2139/ssrn.7320251
セメント固化産業廃棄物焼却飛灰の長期浸出挙動と地球化学モデリング
Santiago, M. J. R. (n.d.) · Institutional Repositories DataBase (IRDB)
Metadata
- Authors
- Pan, D.-L., Jiang, W.-T., Guo, R.-T., Huang, Y., & Pan, W.-G.
- Affiliations
- Shanghai University of Electric Power (CN)
- College of Energy and Mechanical Engineering, Shanghai University of Electric Power, Shanghai 200090, China
- Corresponding author
- Guo, Rui-tang
- Venue
- ACS Omega
- Publisher
- American Chemical Society (ACS)
- Published
- 2021-02-15
- Volume
- 6
- Issue
- 8
- Pages
- 5479-5484
- ISSN
- 2470-1343 (ISSN-L)
- PMC
- PMC7931440
- OpenAlex
- W3130156392
- Cited by
- 32
- References
- 31
- Citations by year
- 2026: 4 · 2025: 5 · 2024: 7 · 2023: 6 · 2022: 8 · 2021: 2
- FWCI
- 1.75
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- ACS Omega (publishedVersion, cc-by-nc-nd)
- PubMed Central (publishedVersion, cc-by-nc-nd)
- PubMed (publishedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Funders
- Science and Technology Commission of Shanghai Municipality (18DZ1202502, 19020500900)
- National Natural Science Foundation of China (21546014)
- Topics
- Physical Sciences › Energy › Fuel Technology › Thermochemical Biomass Conversion Processes
- Physical Sciences › Materials Science › Materials Chemistry › Thermal and Kinetic Analysis
- Physical Sciences › Engineering › Mechanical Engineering › Coal Combustion and Slurry Processing
- Keywords
- coal blends, bituminous coal, combustion kinetics, activation energy, burnout temperature, heating rate effects, volatile matter, fixed carbon, ignition characteristics
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.