The DOI matches its Crossref record; 19 of the 19 references it cites were found in a registry or an index.
Surfactant Adsorption Isotherms: A Review
Open accessAbstract
The need to minimize surfactant adsorption on rock surfaces has been a challenge for surfactant-based, chemical-enhanced oil recovery (cEOR) techniques. Modeling of adsorption experimental data is very useful in estimating the extent of adsorption and, hence, optimizing the process. This paper presents a mini-review of surfactant adsorption isotherms, focusing on theories of adsorption and the most frequently used adsorption isotherm models. Two-step and four-region adsorption theories are well-known, with the former representing adsorption in two steps, while the latter distinguishes four regions in the adsorption isotherm. Langmuir and Freundlich are two-parameter adsorption isotherms that are widely used in cEOR studies. The Langmuir isotherm is applied to monolayer adsorption on homogeneous sites, whereas the Freundlich isotherm suites are applied to multilayer adsorption on heterogeneous sites. Some more complex adsorption isotherms are also discussed in this paper, such as Redlich-Peterson and Sips isotherms, both involve three parameters. This paper will help select and apply a suitable adsorption isotherm to experimental data.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The adsorption of gases on plane surfaces of glass, mica and platinum
Langmuir, I. (1918) · Journal of the American Chemical Society · doi:10.1021/ja02242a004 · Cited by 23,242
THE CONSTITUTION AND FUNDAMENTAL PROPERTIES OF SOLIDS AND LIQUIDS. PART I. SOLIDS.
Langmuir, I. (1916) · Journal of the American Chemical Society · doi:10.1021/ja02268a002 · Cited by 9,997
Insights into the modeling of adsorption isotherm systems
Foo, K. Y., & Hameed, B. H. (2010) · Chemical Engineering Journal · doi:10.1016/j.cej.2009.09.013 · Cited by 8,479 · cited 2×
“…K q 1 L o monolayer adsorption Langmuir, 19165 homogeneous solid surfaces 3 Freundlich 2 ln qe ln Ce 1/n ln b applicable for multilayer adsorption Foo and Hameed, 2010;19 suitable for heterogeneous surfaces Al-Ghouti and Da’ana20not valid for a large range of adsorption data 4 Temkin 2 qe ln Ce…”
BackgroundMethodGuidelines for the use and interpretation of adsorption isotherm models: a review
Al-Ghouti, M. A., & Da'ana, D. A. (2020) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2020.122383 · Cited by 3,535
Modelling and interpretation of adsorption isotherms
Ayawei, N., Ebelegi, A. N., & Wankasi, D. (2017) · Journal of Chemistry · doi:10.1155/2017/3039817 · Cited by 2,957
Principles of adsorption and adsorption processes
Kast, W. (1985) · Chemical Engineering and Processing: Process Intensification · doi:10.1016/0255-2701(85)80013-1 · Cited by 2,430
Adsorption isotherm models: Classification, physical meaning, application and solving method
Wang, J., & Guo, X. (2020) · Chemosphere · doi:10.1016/j.chemosphere.2020.127279 · Cited by 2,289
A review on experimental studies of surfactant adsorption at the hydrophilic solid–water interface
Paria, S., & Khilar, K. C. (2004) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2004.03.001 · Cited by 1,040
Liu, Q.-S., Zheng, T., Wang, P., Jiang, J.-P., & Li, N. (2010) · Chemical Engineering Journal · doi:10.1016/j.cej.2009.11.013 · Cited by 911
Monolayer and multilayer adsorption isotherm models for sorption from aqueous media
Saadi, R., Saadi, Z., Fazaeli, R., & Fard, N. E. (2015) · Korean Journal of Chemical Engineering · doi:10.1007/s11814-015-0053-7 · Cited by 708
Review on Surfactant Flooding: Phase Behavior, Retention, IFT, and Field Applications
Kamal, M. S., Hussein, I. A., & Sultan, A. S. (2017) · Energy & Fuels · doi:10.1021/acs.energyfuels.7b00353 · Cited by 661
Self-citationLangmuir’s Theory of Adsorption: A Centennial Review
Swenson, H., & Stadie, N. P. (2019) · Langmuir · doi:10.1021/acs.langmuir.9b00154 · Cited by 646
Mechanisms of Alkyl Sulfonate Adsorption at the Alumina-Water Interface1
Somasundaran, P., & Fuerstenau, D. W. (1966) · The Journal of Physical Chemistry · doi:10.1021/j100873a014 · Cited by 594
Chandar, P., Somasundaran, P., & Turro, N. J. (1987) · Journal of Colloid and Interface Science · doi:10.1016/0021-9797(87)90165-2 · Cited by 276
Surfactant adsorption at solid-liquid interfaces
Zhu, B.-Y., & Gu, T. (1991) · Advances in Colloid and Interface Science · doi:10.1016/0001-8686(91)80037-k · Cited by 235
Elmorsi, T. M. (2011) · Journal of Environmental Protection · doi:10.4236/jep.2011.26093 · Cited by 224
Belhaj, A. F., Elraies, K. A., Alnarabiji, M. S., Abdul Kareem, F. A., Shuhli, J. A., Mahmood, S. M., & Belhaj, H. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.127081 · Cited by 175
Analytical applications of admicelle and hemimicelle solid phase extraction of organic analytes
Gangula, S., Suen, S., & Conte, E. D. (2009) · Microchemical Journal · doi:10.1016/j.microc.2009.10.005 · Cited by 54
Removal of Pb(II) Ions from Aqueous Solution Using Modified Starch
Gunawardene, O. H. P., Gunathilake, C. A., Amaraweera, S. M., Fernando, N. M. L., Manipura, A., Manamperi, W. A. R., Kulatunga, A. K., Rajapaksha, S. M., Gamage, A., Dassanayake, R. S., et al. (2021) · Journal of Composites Science · doi:10.3390/jcs5020046 · Cited by 35
Cited by
Use and applications of metal-organic frameworks (MOF) in dye adsorption: Review
Sağlam, S., Türk, F. N., & Arslanoğlu, H. (2023) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2023.110568 · Cited by 313
Singh, V., Ahmed, G., Vedika, S., Kumar, P., Chaturvedi, S. K., Rai, S. N., Vamanu, E., & Kumar, A. (2024) · Scientific Reports · doi:10.1038/s41598-024-58061-3 · Cited by 300
Moon, S., Lee, Y.-J., Choi, M.-Y., Lee, C.-G., & Park, S.-J. (2023) · Journal of Applied Phycology · doi:10.1007/s10811-023-03070-4 · Cited by 27
Pan, K., Chen, C. C., Lin, L., Xu, H., Chen, F., Li, Y., Zhu, X., Ma, J., & Lan, W. (2022) · Bulletin of Environmental Contamination and Toxicology · doi:10.1007/s00128-022-03570-y · Cited by 14
Metadata
- Authors
- Kalam, S., Abu-Khamsin, S. A., Kamal, M. S., & Patil, S.
- Venue
- ACS Omega
- Publisher
- American Chemical Society (ACS)
- Published
- 2021-11-24
- Volume
- 6
- Issue
- 48
- Pages
- 32342-32348
- ISSN
- 2470-1343 (ISSN-L)
- OpenAlex
- W3214980366
- Cited by
- 1,105
- References
- 19
- FWCI
- 69.40
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.