Student or educator? Sign up with your school email and get 6 months of Pro free.

The DOI matches its Crossref record; 49 of the 49 references it cites were found in a registry or an index; 2 of the 21 sources its claims cite were checked for support.

Use of Eggshell-Catalyzed Biochar Adsorbents for Pb Removal from Aqueous Solution

Open access

Abstract

High Resolution Image Download MS PowerPoint Slide Eggshell is a cheap and environmentally friendly calcium source. In this study, Ca-modified biochar adsorbents (CEA) were prepared by 1:10, 1:2, and 1:1 mass ratio of the eggshell and Eupatorium adenophorum. The CEA-2 sample prepared with a 1:2 mass ratio showed a maximum Pb adsorption capacity (97.74 mg·g –1 ) at the conditions of an initial pH of 7.0, an adsorbent dosage of 0.5 g·L –1, and a contact time of 8.0 h. The kinetic and isotherm studies indicated that the adsorption process of the CEA-2 sample had monolayer adsorption characteristics, which was controlled together by intraparticle and interface diffusion. Thermodynamic studies indicated that the adsorption process of CEA-2 was spontaneous (Δ G 0 <0) and endothermic (Δ H 0 > 0). X-ray diffraction and scanning electron microscopy analyses showed a uniform distribution of Ca–Pb precipitation on the CEA-2 surface, which proved that chemical precipitation was the main adsorption mechanism. Fourier transform infrared spectra found that CEA-2 had abundant active groups, especially nitrogen-containing functional groups, which could adsorb Pb through a surface complexation reaction. The Brunauer–Emmett–Teller surface area of CEA-2 was found to be 621 m 2 ·g –1, and such developed pores could ensure the smooth diffusion of Pb. Finally, the effect of coexisting cation and anion experiment and the cyclic regeneration experiment indicated that CEA-2 had prominent stability and reusability for Pb adsorption.

Overview

CoChat Summary

TL;DR

Eggshell-catalyzed Ca-modified biochars (CEA) were prepared from *Eupatorium adenophorum* and eggshell at 1:10, 1:2, and 1:1 mass ratios; CEA-2 (1:2) gave the maximum Pb adsorption capacity of 97.74 mg·g–1 at pH 7.0, 0.5 g·L–1 dosage, and 8.0 h contact time. For CEA-2 and CEA-3, Pb removal was dominated by chemical precipitation and surface complexation, whereas CEA-1 was mainly controlled by physical adsorption.

Key findings

  • CEA-2 had the highest Pb adsorption capacity among the three adsorbents: 97.74 mg·g–1, compared with 83.73 mg·g–1 for CEA-3 and 18.02 mg·g–1 for CEA-1 under the selected conditions (initial pH 7.0, 0.5 g·L–1, 8.0 h).
  • CEA-2 and CEA-3 followed pseudo-second-order kinetics (R2 = 0.993 and 0.987, respectively) and the Langmuir isotherm (CEA-2 R2 = 0.987–0.994; CEA-3 R2 = 0.976–0.985), indicating monolayer/chemisorption behavior; CEA-1 followed pseudo-first-order kinetics (R2 = 0.976) and Freundlich isotherms (R2 = 0.978–0.993), indicating multilayer/physical adsorption. Thermodynamics showed CEA-2 was endothermic (ΔH0 = 60.48 kJ·mol–1; ΔG0 = –37.33 to –43.05 kJ·mol–1), while CEA-1 was exothermic (ΔH0 = –11.63 kJ·mol–1).
  • CEA-2 had a BET surface area of 621 m2·g–1, pore volume of 0.38 cm3·g–1, and average pore diameter of 2.37 nm; after Pb adsorption these decreased to 155 m2·g–1, 0.10 cm3·g–1, and 1.93 nm. XRD, SEM, and FTIR showed CaO/Ca(OH)2 peaks disappeared and Pb3(CO3)2(OH)2 precipitates formed, while the C–N stretching peak at 1130 cm–1 disappeared after adsorption.
  • In a ternary Cu/Cd/Pb system, CEA-2 removal rates were Cu2+ 72.75%, Cd2+ 88.12%, and Pb2+ 95.31%; coexisting anions inhibited Pb adsorption in the order HCO3– > SO42– > NO3– > Cl–. After four desorption cycles, CEA-2 adsorption capacity decreased from 97.742 to 92.32 mg·g–1, mass loss was 2.05–2.12%, and Ca2+ release remained very low (~4.1 μg·L–1).

Methods

  • CEA-1, CEA-2, and CEA-3 were prepared by ball-milling *Eupatorium adenophorum* with eggshell at mass ratios of 1:10, 1:2, and 1:1, then pyrolyzing at 800 °C for 1.5 h under N2 at 8 °C/min.
  • Batch adsorption experiments used 50 mL Pb solutions (50 mg·L–1), adsorbent doses of 0.2–0.8 g·L–1, initial pH 2.0–8.0, and 100 rpm stirring for 12 h; kinetics used 0.5 g·L–1, pH 7.0, 298 K, and 0.083–24 h; isotherms used 0.5 g·L–1, pH 7.0, 298/318/338 K, 8 h, and Pb concentrations of 15–150 mg·L–1. Pb was measured by atomic absorption spectrophotometry.
  • Data were analyzed with pseudo-first-order, pseudo-second-order, and intraparticle diffusion kinetic models; Langmuir and Freundlich isotherm models; thermodynamic calculations; SEM, XRD, FTIR, and BET characterization; plus coexisting cation/anion tests and four-cycle EDTA desorption regeneration.

Limitations

  • Not stated in the paper: the paper does not include a dedicated limitations section. Evident from the text: adsorption tests used synthetic aqueous Pb solutions and a ternary Cu/Cd/Pb system, not real industrial wastewater, and no continuous-flow or column tests are reported.
  • Evident from the text: regeneration was limited to four adsorption/desorption cycles with EDTA, so longer-term stability, mass loss, and Ca release beyond four cycles were not assessed.
  • Evident from the text: coexisting-ion experiments focused on selected cations and anions, with anion effects tested only on CEA-2; broader wastewater matrix effects, including organic matter, were not evaluated.

Model-written summary. Check it against the paper before relying on it.

Integrity signals

Registry

Crossref · 10.1021/acsomega.2c01957

Cites

49 of 49 references verified0 citation errors · 0 not checkable

Statistics

Nothing to recompute.

Figures

Figure 1 Speciation of Pb species versus pH predicted by the visual MINTEQ 3.1 software (a); effect of initial pH (b), adsorbent dosage (c), and contact time (d) on Pb adsorption onto Ca-modified biochar.
Figure 1 Speciation of Pb species versus pH predicted by the visual MINTEQ 3.1 software (a); effect of initial pH (b), adsorbent dosage (c), and contact time (d) on Pb adsorption onto Ca-modified biochar.CC BY-NC-ND · PubMed Central
Figure 2 Fitting results of adsorption kinetics (a–c) and isotherms (d–f).
Figure 2 Fitting results of adsorption kinetics (a–c) and isotherms (d–f).CC BY-NC-ND · PubMed Central
Figure 3 SEM images of Ca-modified biochar before adsorption and after adsorption (a) CEA-1; (b) CEA-2; (c) CEA-3; (d) CEA-1-Pb; (e) CEA-2-Pb; and (f) CEA-3-Pb.
Figure 3 SEM images of Ca-modified biochar before adsorption and after adsorption (a) CEA-1; (b) CEA-2; (c) CEA-3; (d) CEA-1-Pb; (e) CEA-2-Pb; and (f) CEA-3-Pb.CC BY-NC-ND · PubMed Central
Figure 4 XRD pattern of Ca-modified biochar before adsorption and after adsorption.
Figure 4 XRD pattern of Ca-modified biochar before adsorption and after adsorption.CC BY-NC-ND · PubMed Central
Figure 5 FTIR spectra of Ca-modified biochar before adsorption and after Pb adsorption.
Figure 5 FTIR spectra of Ca-modified biochar before adsorption and after Pb adsorption.CC BY-NC-ND · PubMed Central
Figure 6 Pb adsorption mechanism of Ca-modified biochar.
Figure 6 Pb adsorption mechanism of Ca-modified biochar.CC BY-NC-ND · PubMed Central
Figure 7 Adsorption performance of Ca-modified biochar in a ternary heavy metal system (a), and influence of coexisting anions on Pb adsorption of CEA-2 (b).
Figure 7 Adsorption performance of Ca-modified biochar in a ternary heavy metal system (a), and influence of coexisting anions on Pb adsorption of CEA-2 (b).CC BY-NC-ND · PubMed Central
Figure 8 Adsorption capacity and mass loss (a) and Ca2+ concentration (b) of Ca-modified biochar under four desorption cycles.
Figure 8 Adsorption capacity and mass loss (a) and Ca2+ concentration (b) of Ca-modified biochar under four desorption cycles.CC BY-NC-ND · PubMed Central

Verification

Claims the paper makes

2 Valid · 0 Not valid · 13 Not checked · 98 Own results and interpretations

33 more claims

Create a free account to see all 113 claims and every source verdict.

See all claims — free account
  • Probably not a substantial claim. 12
  • It may state two separate claims as one. 66

Create a free account to see these claims.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

Each contradiction between two passages listed here was confirmed by an independent check.

3 of 3

Citations

Cites

Show all 49 references

Research works printed but not linked: 1

  1. Dong L. J., 2013, Trans. Chin. Soc. Agric. Mach., 52, 267

Cited by

See all 28

Metadata

Authors
Liu, D., Hao, Z., Chen, D., Jiang, L., Li, T., Tian, B., Yan, C., Luo, Y., Chen, G., & Ai, H.
Affiliations
Jilin Agricultural University (CN)
Corresponding author
Ai, Hongfu
Venue
ACS Omega
Published
2022-06-14
Volume
7
Issue
25
Pages
21808-21819
ISSN
2470-1343 (ISSN-L)
OpenAlex
W4282932351
Cited by
28
References
49
Citations by year
2026: 7 · 2025: 12 · 2024: 5 · 2023: 4
FWCI
1.53
Type
journal article
Language
en
Open access
Locations
  • ACS Omega (publishedVersion, cc-by-nc-nd)
  • PubMed Central (publishedVersion, cc-by-nc-nd)
  • PubMed (publishedVersion)
Funders
  • China Postdoctoral Science Foundation (2020M681053)
  • People's Government of Jilin Province (20210101074JC)
  • National Natural Science Foundation of China (51806080)
  • Education Department of Jilin Province (JJKH20210330KJ)
Topics
  • Physical Sciences › Environmental Science › Water Science and Technology › Adsorption and biosorption for pollutant removal
  • Physical Sciences › Environmental Science › Environmental Engineering › Environmental remediation with nanomaterials
  • Physical Sciences › Environmental Science › Pollution › Heavy metals in environment
Keywords
lead removal, eggshell, Ageratina adenophora, adsorption, heavy metal removal, adsorption kinetics, adsorption isotherms, adsorption thermodynamics, surface complexation, adsorbent regeneration, low-cost adsorbent

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

The claim verdicts this report counts are experimental: their accuracy is not yet measured.

A language model drew the claims from the paper on 2026-10-10, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).

A second model labelled each claim on 2026-10-10 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).

Cited sources are checked with a language model’s help (gpt-6-sol).

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.