The DOI matches its Crossref record; 29 of the 29 references it cites were found in a registry or an index.
Structural, Magnetic, and Catalytic Evaluation of Spinel Co, Ni, and Co–Ni Ferrite Nanoparticles Fabricated by Low-Temperature Solution Combustion Process
Open accessAbstract
Abstract Here, we present the low-temperature (∼600 °C) solution combustion method for the fabrication of CoFe2O4, NiFe2O4, and Co0.5Ni0.5Fe2O4 nanoparticles (NPs) of 12–64 nm range in pure cubic spinel structure, by adjusting the oxidant (nitrate ions)/reductant (glycine) ratio in the reaction mixture. Although nitrate ions/glycine (N/G) ratios of 3 and 6 were used for the synthesis, phase-pure NPs could be obtained only for the N/G ratio of 6. For the N/G ratio 3, certain amount of Ni2+ cations was reduced to metallic nickel. The NH3 gas generated during the thermal decomposition of the amino acid (glycine, H2NCH2COOH) induced the reduction reaction. X-ray diffraction (XRD), Raman spectroscopy, vibrating sample magnetometry, and X-ray photoelectron spectroscopy techniques were utilized to characterize the synthesized materials. XRD analyses of the samples indicate that the Co0.5Ni0.5Fe2O4 NPs have lattice parameter larger than that of NiFe2O4, but smaller than that of CoFe2O4 NPs. Although the saturation magnetization (Ms) of Co0.5Ni0.5Fe2O4 NPs lies in between the saturation magnetization values of CoFe2O4 and NiFe2O4 NPs, high coercivity (Hc, 875 Oe) of the NPs indicate their hard ferromagnetic behavior. Catalytic behavior of the fabricated spinel NPs revealed that the samples containing metallic Ni are active catalysts for the degradation of 4-nitrophenol in aqueous medium.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Shannon, R. D. (1976) · Acta Crystallographica Section A · doi:10.1107/s0567739476001551 · Cited by 66,145
Magnetic Nanoparticles: Synthesis, Protection, Functionalization, and Application
Lu, A., Salabas, E. L., & Schüth, F. (2007) · Angewandte Chemie International Edition · doi:10.1002/anie.200602866 · Cited by 6,777
Magnetism and Magnetic Materials
Perov, N. S. (2009) · Solid State Phenomena · doi:10.4028/b-lzb8ey · Cited by 1,454
Solution Combustion Synthesis of Nanoscale Materials
Varma, A., Mukasyan, A. S., Rogachev, A. S., & Manukyan, K. V. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00279 · Cited by 1,453
Mathew, D. S., & Juang, R.-S. (2007) · Chemical Engineering Journal · doi:10.1016/j.cej.2006.11.001 · Cited by 1,329
Shape Control and Associated Magnetic Properties of Spinel Cobalt Ferrite Nanocrystals
Song, Q., & Zhang, Z. J. (2004) · Journal of the American Chemical Society · doi:10.1021/ja049931r · Cited by 845
Quantitative Chemical Analysis
Fresenius, C. R. (2010) · Medical Entomology and Zoology · Cited by 773
Nitroarene reduction: a trusted model reaction to test nanoparticle catalysts
Aditya, T., Pal, A., & Pal, T. (2015) · Chemical Communications · doi:10.1039/c5cc01131k · Cited by 763
Favaro, M., Xiao, H., Cheng, T., Goddard, W. A., Yano, J., & Crumlin, E. J. (2017) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1701405114 · Cited by 514
Fundamentals of electrochemistry
(2005) · Analytical Electrochemistry in Textiles · doi:10.1201/9781439823798.ch1 · Cited by 422
Magnetic Nanomaterials: Chemical Design, Synthesis, and Potential Applications
Zhu, K., Ju, Y., Xu, J., Yang, Z., Gao, S., & Hou, Y. (2018) · Accounts of Chemical Research · doi:10.1021/acs.accounts.7b00407 · Cited by 330
Manikandan, A., Kennedy, L. J., Bououdina, M., & Vijaya, J. J. (2014) · Journal of Magnetism and Magnetic Materials · doi:10.1016/j.jmmm.2013.09.013 · Cited by 270
Nanoscale Materials in Chemistry
(2009) · Wiley eBooks · doi:10.1002/9780470523674 · Cited by 264
Synthesis and characterization of NiFe2O4 nanoparticles and nanorods
Sivakumar, P., Ramesh, R., Ramanand, A., Ponnusamy, S., & Muthamizhchelvan, C. (2013) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2013.02.077 · Cited by 243
High Coercivity of Oleic Acid Capped CoFe2O4 Nanoparticles at Room Temperature
Limaye, M. V., Singh, S. B., Date, S. K., Kothari, D., Reddy, V. R., Gupta, A., Sathe, V., Choudhary, R. J., & Kulkarni, S. K. (2009) · The Journal of Physical Chemistry B · doi:10.1021/jp810975v · Cited by 241
Shirsath, S. E., Liu, X., Yasukawa, Y., Li, S., & Morisako, A. (2016) · Scientific Reports · doi:10.1038/srep30074 · Cited by 234
Critical survey of stability constants of complexes of glycine
Kiss, T., Sovago, I., & Gergely, A. (1991) · Pure and Applied Chemistry · doi:10.1351/pac199163040597 · Cited by 175
Evaluate the pyrolysis pathway of glycine and glycylglycine by TG–FTIR
Li, J., Wang, Z., Yang, X., Hu, L., Liu, Y., & Wang, C. (2007) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2007.03.001 · Cited by 165
Semiconducting gas sensor for acetone based on the fine grained nickel ferrite
Rezlescu, N., Iftimie, N., Rezlescu, E., Doroftei, C., & Popa, P. D. (2005) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2005.05.030 · Cited by 137
Sarkar, S., Sinha, A. K., Pradhan, M., Basu, M., Negishi, Y., & Pal, T. (2010) · The Journal of Physical Chemistry C · doi:10.1021/jp109572c · Cited by 132
Effect of Zn substitution on the structural and magnetic properties of Ni–Co ferrites
Raju, K., Venkataiah, G., & Yoon, D. (2014) · Ceramics International · doi:10.1016/j.ceramint.2014.01.157 · Cited by 124
Hajalilou, A., Hashim, M., Ebrahimi‐Kahrizsangi, R., Kamari, H. M., & Sarami, N. (2013) · Ceramics International · doi:10.1016/j.ceramint.2013.11.032 · Cited by 77
A comparison of the magnetism of cobalt-, manganese-, and nickel-ferrite nanoparticles
Dönmez, Ç. E. D., Manna, P. K., Wroczynskyj, Y., Aktürk, S., & van Lierop, J. (2017) · Journal of Physics D Applied Physics · doi:10.1088/1361-6463/aa9d79 · Cited by 49
Burgess, J. R., & Hubbard, C. D. (2003) · Advances in inorganic chemistry · doi:10.1016/s0898-8838(03)54002-8 · Cited by 46
Preparation and properties of NiFe2O4 nanowires
Sivakumar, P., Ramesh, R., Ramanand, A., Ponnusamy, S., & Muthamizhchelvan, C. (2011) · Materials Letters · doi:10.1016/j.matlet.2011.09.005 · Cited by 44
Beyond the Compositional Threshold of Nanoparticle-Based Materials
Portehault, D., Delacroix, S., Gouget, G., Grosjean, R., & Chan-Chang, T.-H.-C. (2018) · Accounts of Chemical Research · doi:10.1021/acs.accounts.7b00429 · Cited by 42
Magnetic Cube‐Shaped NiFe2O4 Nanoparticles: An Effective Model Catalyst for Nitro Compound Reduction
Dey, C., Chaudhuri, A., Ghosh, A., & Goswami, M. M. (2017) · ChemCatChem · doi:10.1002/cctc.201700161 · Cited by 36
Acid and Basic Catalysts: Fundamentals
Busca, G. (2014) · Elsevier eBooks · doi:10.1016/b978-0-444-59524-9.00005-5 · Cited by 6
Aerogels: Disordered, Porous Nanostructures
Brock, S. L. (2009) · Wiley eBooks · doi:10.1002/9780470523674.ch8 · Cited by 4
Cited by
Paswan, S. K., Kumari, S., Kar, M., Singh, A., Pathak, H., Borah, J. P., & Kumar, L. (2021) · Journal of Physics and Chemistry of Solids · doi:10.1016/j.jpcs.2020.109928 · Cited by 377
Metadata
- Authors
- Ortiz-Quiñonez, J.-L., Pal, U., & Villanueva, M. S.
- Venue
- ACS Omega
- Publisher
- American Chemical Society (ACS)
- Published
- 2018-11-06
- Volume
- 3
- Issue
- 11
- Pages
- 14986-15001
- ISSN
- 2470-1343 (ISSN-L)
- OpenAlex
- W2900407501
- Cited by
- 358
- References
- 29
- FWCI
- 9.22
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.