The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Third-Order Optical Nonlinearities in Organometallic Methylammonium Lead Iodide Perovskite Thin Films
Open accessAbstract
Abstract With solar conversion efficiencies surpassing 20%, organometallic perovskites show tremendous promise for solar cell technology. Their high brightness has also led to demonstrations of lasing and power-efficient electroluminescence. Here we show that thin films of methylammonium lead iodide, prepared by solution processing at temperatures not exceeding 100 °C, exhibit a highly nonlinear intensity-dependent refractive index due to changes in the free-carrier concentration and for femtosecond excitation at higher intensities undergo saturation that can be attributed to the Pauli blocking effect. Nonlinear refractive index and nonlinear absorption coefficients were obtained by the Z-scan technique, performed simultaneously in open- and closed-aperture configurations. Both nanosecond- and femtosecond-pulsed lasers at multiple wavelengths were used in order to distinguish between the mechanisms inducing the nonlinearities. The magnitude and sign of the nonlinear refractive index n2 were determined. For resonant excitation, free carrier generation is the dominant contribution to the nonlinear refractive index, with a large nonlinear refractive index of n2 = 69 × 10–12 cm2/W being observed for resonant femtosecond pumping and n2 = 34.4 × 10–9 cm2/W for resonant nanosecond pumping. For nonresonant femtosecond excitation, bound-charge-induced nonlinearity leads to n2 = 36 × 10–12 cm2/W. These values are equivalent to the best reported metrics for conventional semiconductors, suggesting that organometallic perovskites are promising materials for optical switching and bistability applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Deschler, F., Price, M., Pathak, S., Klintberg, L. E., Jarausch, D.-D., Higler, R., Hüttner, S., Leijtens, T., Stranks, S. D., Snaith, H. J., et al. (2014) · The Journal of Physical Chemistry Letters · doi:10.1021/jz5005285 · Cited by 1,753
Cited by
Chiral-perovskite optoelectronics
Long, G., Sabatini, R., Saidaminov, M. I., Lakhwani, G., Rasmita, A., Liu, X., Sargent, E. H., & Gao, W. (2020) · Nature Reviews Materials · doi:10.1038/s41578-020-0181-5 · Cited by 909
Chiral Lead Halide Perovskite Nanowires for Second-Order Nonlinear Optics
Yuan, C., Li, X., Semin, S., Feng, Y., Rasing, T., & Xu, J. (2018) · Nano Letters · doi:10.1021/acs.nanolett.8b01616 · Cited by 379
Halide Perovskites for Nonlinear Optics
Xu, J., Li, X., Xiong, J., Yuan, C., Semin, S., Rasing, T., & Bu, X. (2020) · Advanced Materials · doi:10.1002/adma.201806736 · Cited by 355
Two-Dimensional CH3NH3PbI3 Perovskite Nanosheets for Ultrafast Pulsed Fiber Lasers
Li, P., Chen, Y., Yang, T., Wang, Z., Lin, H., Xu, Y., Li, L., Mu, H., Shivananju, B. N., Zhang, Y., et al. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b01709 · Cited by 347
Zhang, Y., Lim, C.-K., Dai, Z., Yu, G., Haus, J. W., Zhang, H., & Prasad, P. N. (2019) · Physics Reports · doi:10.1016/j.physrep.2019.01.005 · Cited by 337
Metadata
- Authors
- Kalanoor, B. S., Gouda, L., Gottesman, R., Tirosh, S., Haltzi, E., Zaban, A., & Tischler, Y. R.
- Venue
- ACS Photonics
- Publisher
- American Chemical Society (ACS)
- Published
- 2016-02-15
- Volume
- 3
- Issue
- 3
- Pages
- 361-370
- ISSN
- 2330-4022 (ISSN-L)
- OpenAlex
- W2254716068
- Cited by
- 179
- References
- 1
- FWCI
- 8.82
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.