The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Temperature-Dependent Optical Properties of Plasmonic Titanium Nitride Thin Films
Open accessAbstract
Due to their exceptional plasmonic properties, noble metals such as, gold and silver, have been the materials of choice for the demonstration of various plasmonic and nanophotonic phenomena. However, noble metals’ softness, lack of tailorability, and low melting point, along with melting point depression in nanostructures as well as challenges in thin film fabrication and device integration in standard semiconductor processing, have prevented the realization of practical plasmonic devices for technologically important high temperature and heat-assisted applications. In the recent years, titanium nitride (TiN) has emerged as a promising plasmonic material with good metallic and refractory (high temperature stable) properties. The refractory nature of TiN could enable practical plasmonic devices operating at elevated temperatures for energy conversion and harsh-environment industries such as gas and oil. Here we report on the temperature-dependent dielectric functions of TiN thin films of varying thicknesses in the technologically relevant visible and near-infrared wavelength range from 330 to 2000 nm for temperatures up to 900 °C using in situ high temperature ellipsometry. Our findings show that the complex dielectric function of TiN at elevated temperatures deviates from the optical parameters at room temperature, indicating degradation in plasmonic properties both in the real and imaginary parts of the dielectric constant. However, quite strikingly, the relative changes of the optical properties of TiN are significantly smaller compared to its noble metal counterparts. In fact, at temperatures over 400 °C the quality factors of localized surface plasmon resonances and propagating surface plasmons in thin TiN films become nearly the same as those in polycrystalline noble metals. Furthermore, no structural degradation was observed in any of TiN films upon heat treatment. Using simulations, we demonstrate that incorporating the temperature-induced deviations into the numerical models leads to significant differences in the optical responses of high temperature nanophotonic systems. These studies hold the key for accurate modeling of high temperature TiN-based optical elements and nanophotonic systems for energy conversion, harsh-environment sensors, and heat-assisted applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Optical Constants of the Noble Metals
Johnson, P. B., & Christy, R. W. (1972) · Physical Review B · doi:10.1103/physrevb.6.4370 · Cited by 20,094
Flat optics with designer metasurfaces
Yu, N., & Capasso, F. (2014) · Nature Materials · doi:10.1038/nmat3839 · Cited by 5,984
Plasmonics beyond the diffraction limit
Gramotnev, D. K., & Bozhevolnyi, S. I. (2010) · Nature Photonics · doi:10.1038/nphoton.2009.282 · Cited by 3,903
Cited by
Nonnoble‐Metal‐Based Plasmonic Nanomaterials: Recent Advances and Future Perspectives
Kim, S., Kim, J., Park, J., & Nam, J. (2018) · Advanced Materials · doi:10.1002/adma.201704528 · Cited by 271
Quevedo-Teruel, O., Chen, H., Díaz-Rubio, A., Gok, G., Grbic, A., Minatti, G., Martini, E., Maci, S., Eleftheriades, G. V., Chen, M., et al. (2019) · Journal of Optics · doi:10.1088/2040-8986/ab161d · Cited by 259
Self-citation
Metadata
- Authors
- Reddy, H., Guler, U., Kudyshev, Z., Kildishev, A. V., Shalaev, V. M., & Boltasseva, A.
- Venue
- ACS Photonics
- Publisher
- American Chemical Society (ACS)
- Published
- 2017-05-09
- Volume
- 4
- Issue
- 6
- Pages
- 1413-1420
- ISSN
- 2330-4022 (ISSN-L)
- OpenAlex
- W2609570686
- Cited by
- 193
- References
- 3
- FWCI
- 7.33
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.