The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Optical Waveplates Based on Birefringence of Anisotropic Two-Dimensional Layered Materials
Open accessAbstract
Birefringence is an inherent optical property of anisotropic materials introduced by the anisotropic confinement in their crystal structures. It enables manipulation of light propagation properties (e.g., phase velocity, reflection, and refraction) for various photonic and optoelectronic applications, including waveplates and liquid crystal displays. Two-dimensional (2D) layered materials with high anisotropy are currently gaining an increasing interest for polarization-integrated nanodevice applications, which advances the research on birefringent materials. In this article, we investigate the optical birefringence of three anisotropic 2D layered materials (black phosphorus (BP), rhenium disulfide (ReS 2 ), and rhenium diselenide (ReSe 2 )). We demonstrate that the birefringence in BP (∼0.245) is ∼6× larger than that of ReS 2 (∼0.037) and ReSe 2 (∼0.047) at 520 nm and is compared to that of the current state of the art bulk materials (e.g., CaCO 3 ). We use these 2D materials to fabricate atomically thin optical waveplates and investigate their performance. In particular, for BP, we observe a polarization-plane rotation of ∼0.05° per atomic layer at 520 nm. Our results show that the relatively large birefringence of anisotropic 2D layered materials can enable accurate manipulation of light polarization with atomically controlled device thickness for various applications where integrated, nanoscale polarization-controllers are required.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Hybrid functionals based on a screened Coulomb potential
Heyd, J., Scuseria, G. E., & Ernzerhof, M. (2003) · The Journal of Chemical Physics · doi:10.1063/1.1564060 · Cited by 19,629
Electronics and optoelectronics of two-dimensional transition metal dichalcogenides
Wang, Q. H., Kalantar-Zadeh, K., Kis, A., Coleman, J. N., & Strano, M. S. (2012) · Nature Nanotechnology · doi:10.1038/nnano.2012.193 · Cited by 16,374
Photodetectors based on graphene, other two-dimensional materials and hybrid systems
Koppens, F. H. L., Mueller, T., Avouris, P., Ferrari, A. C., Vitiello, M. S., & Polini, M. (2014) · Nature Nanotechnology · doi:10.1038/nnano.2014.215 · Cited by 3,828
Photonics and optoelectronics of 2D semiconductor transition metal dichalcogenides
Mak, K. F., & Shan, J. (2016) · Nature Photonics · doi:10.1038/nphoton.2015.282 · Cited by 3,819
Cited by
Nonlinear Optics with 2D Layered Materials
Autere, A., Jussila, H., Dai, Y., Wang, Y., Lipsanen, H., & Sun, Z. (2018) · Advanced Materials · doi:10.1002/adma.201705963 · Cited by 839
Self-citation
Metadata
- Authors
- Yang, H., Jussila, H., Autere, A., Komsa, H.-P., Ye, G., Chen, X., Hasan, T., & Sun, Z.
- Venue
- ACS Photonics
- Publisher
- American Chemical Society (ACS)
- Published
- 2017-07-24
- Volume
- 4
- Issue
- 12
- Pages
- 3023-3030
- ISSN
- 2330-4022 (ISSN-L)
- OpenAlex
- W2724239110
- Cited by
- 229
- References
- 4
- FWCI
- 8.92
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Optical Waveplates Based on Birefringence of Anisotropic Two-Dimensional Layered Materials. https://app.cochat.ai/papers/10.1021/acsphotonics.7b00507
- The paper
- Yang, H., Jussila, H., Autere, A., Komsa, H.-P., Ye, G., Chen, X., Hasan, T., & Sun, Z. (2017). Optical Waveplates Based on Birefringence of Anisotropic Two-Dimensional Layered Materials. ACS Photonics. https://doi.org/10.1021/acsphotonics.7b00507
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.