The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Experimental and Kinetic Modeling Studies on the Sulfuric Acid Catalyzed Conversion of d-Fructose to 5-Hydroxymethylfurfural and Levulinic Acid in Water
Open accessAbstract
Levulinic acid (LA) and 5-hydroxymethylfurfural (HMF) have been identified as promising biomass-derived platform chemicals. A kinetic study on the conversion of d -fructose to HMF and LA in water using sulfuric acid as the catalyst has been performed in batch setups. The experiments were carried out in a temperature window of 140–180 °C, using sulfuric acid as the catalyst (0.005–1 M) and an initial d -fructose concentration between 0.1 and 1 M. A kinetic model for the conversion of d -fructose to HMF and the subsequent reaction of HMF to LA was developed including the kinetics for the formation of solid byproducts (humins) using a power-law approach. According to the model, the maximum attainable HMF yield in the experimental window is 56 mol % ( C fruc = 0.1 M; C acid = 0.005 M; 166 °C), which is close to the highest experimental value within the range (53 mol %) and considerably higher than that reported for d -glucose. The highest modeled LA yield was 70 mol % ( C fruc = 0.1 M; C acid = 1 M; 140 °C), close to the experimental value of 74 mol %. This LA yield is considerably higher than that found for d -glucose within the range of experimental conditions. The model was used to determine the optimum reactor configuration for highest HMF and LA yields, and it is shown that highest HMF yields are attainable in a PFR reactor, whereas a large extent of backmixing is favorable when aiming for a high LA yield.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Chemical Routes for the Transformation of Biomass into Chemicals
Corma, A., Iborra, S., & Velty, A. (2007) · Chemical Reviews · doi:10.1021/cr050989d · Cited by 5,970
Bozell, J. J., & Petersen, G. R. (2010) · Green Chemistry · doi:10.1039/b922014c · Cited by 4,566
Hydroxymethylfurfural, A Versatile Platform Chemical Made from Renewable Resources
van Putten, R.-J., van der Waal, J. C., de Jong, E., Rasrendra, C. B., Heeres, H. J., & de Vries, J. G. (2013) · Chemical Reviews · doi:10.1021/cr300182k · Cited by 2,886
Self-citationAcid-Catalyzed Production of 5-Hydroxymethyl Furfural from d-Fructose in Subcritical Water
Salak Asghari, F., & Yoshida, H. (2006) · Industrial & Engineering Chemistry Research · doi:10.1021/ie051088y · Cited by 500
Cited by
Catalytic Conversion of Carbohydrates to Initial Platform Chemicals: Chemistry and Sustainability
Mika, L. T., Cséfalvay, E., & Németh, Á. (2018) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00395 · Cited by 1,320
From lignocellulosic biomass to levulinic acid: A review on acid-catalyzed hydrolysis
Kang, S., Fu, J., & Zhang, G. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2018.06.016 · Cited by 580
Bio-Based Chemicals from Renewable Biomass for Integrated Biorefineries
Kohli, K., Prajapati, R., & Sharma, B. K. (2019) · Energies · doi:10.3390/en12020233 · Cited by 357
Metadata
- Authors
- Fachri, B. A., Abdilla, R. M., Bovenkamp, H. H. V. D., Rasrendra, C. B., & Heeres, H. J.
- Venue
- ACS Sustainable Chemistry & Engineering
- Publisher
- American Chemical Society (ACS)
- Published
- 2015-11-13
- Volume
- 3
- Issue
- 12
- Pages
- 3024-3034
- ISSN
- 2168-0485 (ISSN-L)
- OpenAlex
- W2255482230
- Cited by
- 175
- References
- 4
- FWCI
- 5.66
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.