The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Highly Selective Capture of the Greenhouse Gas CO2 in Polymers
Open accessAbstract
Abstract Owing to their high physicochemical stability and low skeleton density, polymers are highly promising for capturing the greenhouse gas CO2. However, complicated monomers, expensive catalysts, and/or severe conditions are usually required for their synthesis, which makes the process costly, tedious, and hard to scale up. In this paper, a facile nucleophilic substitution reaction is developed to synthesize polymers from low-cost monomers, namely chloromethylbenzene and various diamines. Due to the appropriate reactivity of monomers, the polymerization takes place at a low temperature of about 60 °C in the absence of any catalysts. A series of polymers containing plentiful secondary amines are successfully fabricated; these secondary amines provide a proper adsorbate–adsorbent interaction from the viewpoints of selective capture of CO2 and energy-efficient regeneration of adsorbents. Moreover, the materials possess well-defined micropores with the dimension close to the size of adsorbate molecules and subsequently, exhibit the molecule sieving effect. As a result, these materials are active in selective adsorption of CO2 and show high CO2/N2 and CO2/CH4 selectivities. More importantly, the adsorbents can be completely regenerated under mild conditions, and no loss in activity is detected after eight cycles.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Carbon capture and storage update
Boot-Handford, M. E., Abanades, J. C., Anthony, E. J., Blunt, M. J., Brandani, S., Mac Dowell, N., Fernández, J. R., Ferrari, M.-C., Gross, R., Hallett, J. P., et al. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee42350f · Cited by 2,386
Carbon capture and storage: how green can black be
Haszeldine, R. S. (2009) · Science · doi:10.1126/science.1172246 · Cited by 2,021
An overview of CO2 capture technologies
MacDowell, N., Florin, N., Buchard, A., Hallett, J., Galindo, A., Jackson, G., Adjiman, C. S., Williams, C. K., Shah, N., & Fennell, P. (2010) · Energy & Environmental Science · doi:10.1039/c004106h · Cited by 1,636
An Amine-Functionalized MIL-53 Metal−Organic Framework with Large Separation Power for CO 2 and CH 4
Couck, S., Denayer, J. F. M., Baron, G. V., Rémy, T., Gascon, J., & Kapteijn, F. (2009) · Journal of the American Chemical Society · doi:10.1021/ja900555r · Cited by 988
Cited by
Metal–Organic Frameworks for Heterogeneous Basic Catalysis
Zhu, L., Liu, X.-Q., Jiang, H.-L., & Sun, L.-B. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00091 · Cited by 1,466
Self-citationEmerging trends in porous materials for CO2capture and conversion
Singh, G., Lee, J., Karakoti, A., Bahadur, R., Yi, J., Zhao, D., AlBahily, K., & Vinu, A. (2020) · Chemical Society Reviews · doi:10.1039/d0cs00075b · Cited by 843
CO2 adsorption at nitrogen-doped carbons prepared by K2CO3 activation of urea-modified coconut shell
Yue, L., Xia, Q., Wang, L., Wang, L., DaCosta, H., Yang, J., & Hu, X. (2018) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2017.09.040 · Cited by 364
Trends in Solid Adsorbent Materials Development for CO 2 Capture
Pardakhti, M., Jafari, T., Tobin, Z., Dutta, B., Moharreri, E., Shemshaki, N. S., Suib, S., & Srivastava, R. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b08487 · Cited by 357
Carbon dioxide capture in amorphous porous organic polymers
Wang, W., Zhou, M., & Yuan, D. (2017) · Journal of Materials Chemistry A · doi:10.1039/c6ta09234a · Cited by 307
Metadata
- Authors
- Sun, L.-B., Kang, Y.-H., Shi, Y.-Q., Jiang, Y., & Liu, X.-Q.
- Venue
- ACS Sustainable Chemistry & Engineering
- Publisher
- American Chemical Society (ACS)
- Published
- 2015-11-20
- Volume
- 3
- Issue
- 12
- Pages
- 3077-3085
- ISSN
- 2168-0485 (ISSN-L)
- OpenAlex
- W2509173781
- Cited by
- 198
- References
- 4
- FWCI
- 17.65
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.