The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Tannic Acid Induced Self-Assembly of Three-Dimensional Graphene with Good Adsorption and Antibacterial Properties
Abstract
In this paper, a green one-step strategy is developed to fabricate three-dimensional (3D) graphene-based multifunctional material with the aid of tannic acid. Tannic acid (TA), a typical plant polyphenol widely present in woods, reduced GO and induced the self-assembly of reduced graphene oxide into graphene hydrogel. The preparation process was carried out in aqueous media under atmosphere pressure without using any toxic reducing agent or special instrument, which is a facile, green, and low-cost method. The as-prepared monolithic 3D graphene exhibits high porosity, low density, hydrophobicity, good mechanical performance, and thermal stability. In addition, it shows excellent adsorption toward dyes, oils, and organic solvent, which should be a promising candidate for efficient adsorbents in water purification. Moreover, the tannic acid retained in the skeleton of 3D graphene functions as a biofunctional component, which endows the TA-GH with good antibacterial capability.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Self-Assembled Graphene Hydrogel via a One-Step Hydrothermal Process
Xu, Y., Sheng, K., Li, C., & Shi, G. (2010) · ACS Nano · doi:10.1021/nn101187z · Cited by 3,251
Superhydrophobic and superoleophilic graphene aerogel prepared by facile chemical reduction
Xu, L., Xiao, G., Chen, C., Li, R., Mai, Y., Sun, G., & Yan, D. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta00383k · Cited by 183
Cited by
Ninan, N., Forget, A., Shastri, V. P., Voelcker, N. H., & Blencowe, A. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b10491 · Cited by 676
Tannic acid: a crosslinker leading to versatile functional polymeric networks: a review
Chen, C., Yang, H., Yang, X., & Ma, Q. (2022) · RSC Advances · doi:10.1039/d1ra07657d · Cited by 561
3D Graphene Materials: From Understanding to Design and Synthesis Control
Sun, Z., Fang, S., & Hu, Y. H. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00083 · Cited by 543
Polyphenol scaffolds in tissue engineering
Zhang, X., Li, Z., Yang, P., Duan, G., Liu, X., Gu, Z., & Li, Y. (2021) · Materials Horizons · doi:10.1039/d0mh01317j · Cited by 417
Self-citationMOF based engineered materials in water remediation: Recent trends
Rego, R. M., Kuriya, G., Kurkuri, M. D., & Kigga, M. (2021) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2020.123605 · Cited by 384
Metadata
- Authors
- Luo, J., Lai, J., Zhang, N., Liu, Y., Liu, R., & Liu, X.
- Venue
- ACS Sustainable Chemistry & Engineering
- Publisher
- American Chemical Society (ACS)
- Published
- 2016-01-06
- Volume
- 4
- Issue
- 3
- Pages
- 1404-1413
- ISSN
- 2168-0485 (ISSN-L)
- OpenAlex
- W2229796655
- Cited by
- 249
- References
- 2
- FWCI
- 7.73
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Tannic Acid Induced Self-Assembly of Three-Dimensional Graphene with Good Adsorption and Antibacterial Properties. https://app.cochat.ai/papers/10.1021/acssuschemeng.5b01407
- The paper
- Luo, J., Lai, J., Zhang, N., Liu, Y., Liu, R., & Liu, X. (2016). Tannic Acid Induced Self-Assembly of Three-Dimensional Graphene with Good Adsorption and Antibacterial Properties. ACS Sustainable Chemistry & Engineering. https://doi.org/10.1021/acssuschemeng.5b01407
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.