Biomass-Based Fuels and Activated Carbon Electrode Materials: An Integrated Approach to Green Energy Systems
The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
Although pyrolysis holds promise for extracting biofuels from biomass, the low value of the biochar produced, combined with process energy requirements, make thermochemical conversion marginally viable. Likewise, while supercapacitors and fuel cells may satisfy growing demands for portable electronics and electric vehicles, current fossil-fuel based activated carbon electrodes are not sustainable. Both of these issues are addressed using a new approach to the integrated biorefinery. Pyrolysis of pistachio nutshell biomass yields a bio-oil high in benzenediols and pyrolysis gas enriched in methane and hydrogen. By impregnating the biochars produced via pyrolysis with potassium hydroxide, followed by heat treatment in an inert atmosphere, the total biofuel yield increased up to 25% while producing high surface area (>1900 m 2 /g) activated carbon biochar for use in electrochemical cells. Coin cell electrodes fabricated with these sustainable activated carbons provide almost 100% coulombic efficiency over 4000 charge–discharge cycles with a specific capacitance of 45 F/g at a scan rate of 1 mV/s using a Li-salt electrolyte. Such integrated processes will hasten the transition to a renewable energy future.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Global kinetic analysis of complex materials
Burnham, A. K., & Braun, R. L. (1999) · Energy & Fuels · doi:10.1021/ef9800765 · Cited by 585
Sustainable biomass-based carbon adsorbents for post-combustion CO2 capture
González, A. S., Plaza, M. G., Rubiera, F., & Pevida, C. (2013) · Chemical Engineering Journal · doi:10.1016/j.cej.2013.06.118 · Cited by 280
Cited by
Chen, W., Gong, M., Li, K., Xia, M., Chen, Z., Xiao, H., Fang, Y., Chen, Y., Yang, H., & Chen, H. (2020) · Applied Energy · doi:10.1016/j.apenergy.2020.115730 · Cited by 651
Biomass pyrolysis: past, present, and future
Fahmy, T. Y. A., Fahmy, Y., Mobarak, F., El-Sakhawy, M., & Abou-Zeid, R. E. (2020) · Environment, Development and Sustainability · doi:10.1007/s10668-018-0200-5 · Cited by 528
Recent advances in engineered biochar productions and applications
Wang, B., Gao, B., & Fang, J. (2017) · Critical Reviews in Environmental Science and Technology · doi:10.1080/10643389.2017.1418580 · Cited by 501
Recent advances and challenges in biomass-derived porous carbon nanomaterials for supercapacitors
Li, Z., Guo, D., Liu, Y., Wang, H., & Wang, L. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.125418 · Cited by 396
Solution combustion synthesis, energy and environment: Best parameters for better materials
Deganello, F., & Tyagi, A. K. (2018) · Progress in Crystal Growth and Characterization of Materials · doi:10.1016/j.pcrysgrow.2018.03.001 · Cited by 366
Supercapacitor Energy Storage Device Using Biowastes: A Sustainable Approach to Green Energy
Mensah-Darkwa, K., Zequine, C., Kahol, P. K., & Gupta, R. K. (2019) · Sustainability · doi:10.3390/su11020414 · Cited by 321
Multi-heteroatom-doped carbon from waste-yeast biomass for sustained water splitting
Tiwari, J. N., Dang, N. K., Sultan, S., Thangavel, P., Jeong, H. Y., & Kim, K. S. (2020) · Nature Sustainability · doi:10.1038/s41893-020-0509-6 · Cited by 276
Recent advances in biochar-based adsorbents for CO2 capture
Guo, S., Li, Y., Wang, Y., Wang, L., Sun, Y., & Liu, L. (2022) · Carbon Capture Science & Technology · doi:10.1016/j.ccst.2022.100059 · Cited by 201
Chowdhary, P., Gupta, A., Gnansounou, E., Pandey, A., & Chaturvedi, P. (2021) · Environmental Pollution · doi:10.1016/j.envpol.2021.116796 · Cited by 146
Gupta, S., Mondal, P., Borugadda, V. B., & Dalai, A. K. (2021) · Environmental Technology & Innovation · doi:10.1016/j.eti.2020.101276 · Cited by 113
Metadata
- Authors
- Goldfarb, J. L., Dou, G., Salari, M., & Grinstaff, M. W.
- Venue
- ACS Sustainable Chemistry & Engineering
- Publisher
- American Chemical Society (ACS)
- Published
- 2017-03-23
- Volume
- 5
- Issue
- 4
- Pages
- 3046-3054
- ISSN
- 2168-0485 (ISSN-L)
- OpenAlex
- W2593900772
- Cited by
- 118
- References
- 2
- FWCI
- 5.70
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.