Lignin Depolymerization to Dicarboxylic Acids with Sodium Percarbonate
Open accessThe DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
Lignin depolymerization to dicarboxylic acids (DCAs) by the one-step Fenton oxidation process results in poor yield and significant amounts of residual solids. A process based on the use of sodium percarbonate on bagasse lignin depolymerization was conducted at 60–300 °C, for 1–6 h. This approach resulted in significantly higher DCA yields (predominantly oxalic, malonic, and succinic acids), without the formation of char, when compared to the acidic H 2 O 2 /chalcopyrite process. This was in part due to the effectiveness of the alkaline reaction medium in suppressing the thermal degradation of DCAs during processing. It was determined that increasing the alkaline content of the reaction mixture further significantly improved DCA yield. When applying this process at 200 °C for 3 h, using 1 M NaOH (in addition to 0.6 M sodium percarbonate) increased DCA yield by 85%. The process developed was applied to the lignin model compounds; guaiacol, vanillic acid, and p -hydroxybenzoic acid. It was demonstrated that the degradation pathways and product ratios of these compounds differed, implying an influence of lignin monomer ratio on the DCA product range. DCAs produced from this process have the potential to be used in the industrial production of green insecticides, fungicides, and disinfectants.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Towards quantitative catalytic lignin depolymerization
Roberts, V. M., Stein, V., Reiner, T., Lemonidou, A., Li, X., & Lercher, J. A. (2011) · Chemistry – A European Journal · doi:10.1002/chem.201002438 · Cited by 543
Cited by
Downstream processing of lignin derived feedstock into end products
Wong, S. S., Shu, R., Zhang, J., Liu, H., & Yan, N. (2020) · Chemical Society Reviews · doi:10.1039/d0cs00134a · Cited by 528
Figueirêdo, M. B., Hita, I., Deuss, P. J., Venderbosch, R. H., & Heeres, H. J. (2022) · Green Chemistry · doi:10.1039/d2gc00302c · Cited by 146
Complementing vanillin and cellulose production by oxidation of lignocellulose with stirring control
Zhu, Y., Liao, Y., Lv, W., Liu, J., Song, X., Chen, L., Wang, C., Sels, B. F., & Ma, L. (2020) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.9b04837 · Cited by 94
Metadata
- Authors
- Cronin, D. J., Zhang, X., Bartley, J., & Doherty, W. O. S.
- Venue
- ACS Sustainable Chemistry & Engineering
- Publisher
- American Chemical Society (ACS)
- Published
- 2017-06-05
- Volume
- 5
- Issue
- 7
- Pages
- 6253-6260
- ISSN
- 2168-0485 (ISSN-L)
- OpenAlex
- W2620310643
- Cited by
- 49
- References
- 1
- FWCI
- 2.21
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Lignin Depolymerization to Dicarboxylic Acids with Sodium Percarbonate. https://app.cochat.ai/papers/10.1021/acssuschemeng.7b01208
- The paper
- Cronin, D. J., Zhang, X., Bartley, J., & Doherty, W. O. S. (2017). Lignin Depolymerization to Dicarboxylic Acids with Sodium Percarbonate. ACS Sustainable Chemistry & Engineering. https://doi.org/10.1021/acssuschemeng.7b01208
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.