Catalytic Fast Pyrolysis of Cellulose and Biomass to Selectively Produce Levoglucosenone Using Activated Carbon Catalyst
The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
Activated carbon (AC) prepared by chemical activation with H 3 PO 4 (named AC-P) was employed for catalytic fast pyrolysis of cellulose and biomass to selectively produce levoglucosenone (LGO). The catalytic pyrolysis behaviors and product distributions were revealed via both analytical pyrolysis-gas chromatography/mass spectrometry (Py-GC/MS) and lab-scale experiments. Moreover, the performance of AC-P catalyst was compared with previously reported strong acid catalysts and other ACs prepared by different activation methods. In addition, reusability and stability of the AC-P catalyst have been examined via recycling experiments. The results indicated that the AC-P catalyst was effective for selectively preparing LGO from both cellulose and biomass and performed better than other catalysts. Among the three biomass materials (pine wood, poplar wood, and bagasse), pine wood showed the best selectivity for producing LGO. The maximal LGO yields of 18.1 and 9.1 wt % were obtained from cellulose and pine wood, respectively, in Py-GC/MS experiments under a catalyst-to-feedstock ratio of 1:3 at 300 °C, whereas the lab-scale setup obtained the highest LGO yields of 14.7 and 7.8 wt % from cellulose and pine wood with selectivities of 76.3 and 43.0%, respectively, based on organic liquid products. Furthermore, granular AC-P catalyst exhibited good reusability and stability in the recycling experiments. Stable yields of LGO above 12.5 wt % from cellulose were obtained in six consecutive runs without any regeneration of the recycled granular AC-P catalyst.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Review of fast pyrolysis of biomass and product upgrading
Bridgwater, A. V. (2012) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2011.01.048 · Cited by 4,856
Cited by
Recent Progress in Quantum Chemistry Modeling on the Pyrolysis Mechanisms of Lignocellulosic Biomass
Hu, B., Zhang, B., Xie, W.-L., Jiang, X.-Y., Liu, J., & Lu, Q. (2020) · Energy & Fuels · doi:10.1021/acs.energyfuels.0c01948 · Cited by 161
Zhang, S., Wang, J., Zhu, S., Liu, X., Xiong, Y., & Zhang, H. (2020) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2020.104962 · Cited by 53
High yield production of levoglucosan via catalytic pyrolysis of cellulose at low temperature
Jiang, L., Luo, J., Xu, F., Qian, L., Wang, Y., Li, H., & Fang, Z. (2022) · Fuel · doi:10.1016/j.fuel.2022.124369 · Cited by 30
Metadata
- Authors
- Ye, X.-N., Lu, Q., Wang, X., Guo, H.-Q., Cui, M.-S., Dong, C.-Q., & Yang, Y.-P.
- Venue
- ACS Sustainable Chemistry & Engineering
- Publisher
- American Chemical Society (ACS)
- Published
- 2017-10-09
- Volume
- 5
- Issue
- 11
- Pages
- 10815-10825
- ISSN
- 2168-0485 (ISSN-L)
- OpenAlex
- W2759508439
- Cited by
- 129
- References
- 1
- FWCI
- 5.47
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.