Facile Strategy in Designing Epoxy/Paraffin Multiple Phase Change Materials for Thermal Energy Storage Applications
The DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Abstract
Designing novel phase change materials (PCMs) is of vital importance in achieving the sustainable development of energy. Here, we facilely prepare a series of novel multiple solid–solid PCMs (SSPCMs, EP Pa-X systems) by blending paraffin, epoxy resin with crystalline side chains (D18), and poly(propylene oxide)diamine together followed by a one-pot curing process. Strong intermolecular forces between paraffin and D18 (based on their good compatibility) and a reliable three-dimensional (3-D) cross-linking network of epoxy resin form a unique encapsulation mechanism, which provides the EP Pa-X SSPCMs with excellent shape-stable properties and superior thermal stability (remain stable below 180 °C) without sacrificing too much latent heat of paraffin (only 1.6% latent heat loss). Due to the combination of two melting processes at 36 and 60 °C derived from D18 and paraffin, respectively, the latent heat of the EP Pa-50 system is high, up to 152.6 J/g. Besides, the supercooling extent of D18 decreased from 13.6 to 10.5 °C with the addition of paraffin due to the heterogeneous nucleation effect. The novel EP Pa-X SSPCMs possess tremendous potential for a wide range of applications due to their facile preparation, low cost, high reliability, and excellent phase change properties, while the unique encapsulation mechanism may open a new door for preparing other novel types of PCMs.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Ji, H., Sellan, D. P., Pettes, M. T., Kong, X., Ji, J., Shi, L., & Ruoff, R. S. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee42573h · Cited by 592
Kholmanov, I., Kim, J., Ou, E., Ruoff, R. S., & Shi, L. (2015) · ACS Nano · doi:10.1021/acsnano.5b02917 · Cited by 341
From anisotropic graphene aerogels to electron- and photo-driven phase change composites
Li, G., Zhang, X., Wang, J., & Fang, J. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta07587h · Cited by 226
Solar-thermal conversion and thermal energy storage of graphene foam-based composites
Zhang, L., Li, R., Tang, B., & Wang, P. (2016) · Nanoscale · doi:10.1039/c6nr03921a · Cited by 217
Luan, Y., Yang, M., Ma, Q., Qi, Y., Gao, H., Wu, Z., & Wang, G. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta01676f · Cited by 190
Cited by
Umair, M. M., Zhang, Y., Iqbal, K., Zhang, S., & Tang, B. (2019) · Applied Energy · doi:10.1016/j.apenergy.2018.11.017 · Cited by 852
Weng, J., Huang, Q., Li, X., Zhang, G., Ouyang, D., Chen, M., Yuen, A. C. Y., Li, A., Lee, E. W. M., Yang, W., et al. (2022) · Energy Storage Materials · doi:10.1016/j.ensm.2022.09.007 · Cited by 297
Wu, H.-Y., Li, S.-T., Shao, Y.-W., Jin, X.-Z., Qi, X.-D., Yang, J.-H., Zhou, Z.-W., & Wang, Y. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.122373 · Cited by 291
Encapsulation methods for phase change materials – A critical review
Huang, Y., Stonehouse, A., & Abeykoon, C. (2023) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2022.123458 · Cited by 286
Yang, J., Tang, L.-S., Bai, L., Bao, R.-Y., Liu, Z.-Y., Xie, B.-H., Yang, M.-B., & Yang, W. (2019) · Materials Horizons · doi:10.1039/c8mh01219a · Cited by 269
Metadata
- Authors
- Lian, Q., Li, Y., Sayyed, A. A. S., Cheng, J., & Zhang, J.
- Venue
- ACS Sustainable Chemistry & Engineering
- Publisher
- American Chemical Society (ACS)
- Published
- 2018-01-15
- Volume
- 6
- Issue
- 3
- Pages
- 3375-3384
- ISSN
- 2168-0485 (ISSN-L)
- OpenAlex
- W2783929056
- Cited by
- 99
- References
- 5
- FWCI
- 7.67
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Facile Strategy in Designing Epoxy/Paraffin Multiple Phase Change Materials for Thermal Energy Storage Applications. https://app.cochat.ai/papers/10.1021/acssuschemeng.7b03558
- The paper
- Lian, Q., Li, Y., Sayyed, A. A. S., Cheng, J., & Zhang, J. (2018). Facile Strategy in Designing Epoxy/Paraffin Multiple Phase Change Materials for Thermal Energy Storage Applications. ACS Sustainable Chemistry & Engineering. https://doi.org/10.1021/acssuschemeng.7b03558
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.