The DOI matches its Crossref record.
Sustainable Synthesis of High-Surface-Area Graphite Oxide via Dry Ball Milling
Open accessAbstract
A sustainable route to produce graphite oxide ( GO ) is presented using dry ball milling. The production method was based on pristine graphite flakes in a planetary ball mill. The prepared GO was characterized using UV–vis spectroscopy, BET surface area analysis, thermal analysis, SEM-EDX, TEM, XPS, elemental analysis, and Raman spectroscopy. The degree of graphite oxidation was controllable by the milling time and milling material, and the carbon-based yields ranged from 86 to 97%. The maximum oxygen/carbon ratios of the produced GOs were 0.16 and 0.15 after 24 h of ball milling with steel and zirconia balls, respectively. The BET surface area increased with increasing milling time from 1 m 2 g –1 for pristine graphite up to 730 m 2 g –1 for the ball-milled samples. Furthermore, the intensity ratios of the D and G bands ( I D / I G ) from the Raman spectra were 0.84 and 0.77 for GO produced with the steel and zirconia balls, respectively. The in-plane sp 2 crystallite sizes ( L a ) of graphite (168 nm) decreased to 20 (steel balls) and 22 nm (zirconia balls). Additionally, the produced GO was tested as an adsorbent for methylene blue dye removal.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Abid, N., Khan, A. M., Shujait, S., Chaudhary, K., Ikram, M., Imran, M., Haider, J., Khan, M., Khan, Q., & Maqbool, M. (2022) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2021.102597 · Cited by 1,271
Mechanochemical synthesis of highly porous materials
Szczęśniak, B., Borysiuk, S., Choma, J., & Jaroniec, M. (2020) · Materials Horizons · doi:10.1039/d0mh00081g · Cited by 333
Naiel, B., Fawzy, M., Halmy, M. W. A., & Mahmoud, A. E. D. (2022) · Scientific Reports · doi:10.1038/s41598-022-24805-2 · Cited by 314
Self-citationPreparation methods of different nanomaterials for various potential applications: A review
El-Khawaga, A. M., Zidan, A., & El-Mageed, A. I. A. A. (2023) · Journal of Molecular Structure · doi:10.1016/j.molstruc.2023.135148 · Cited by 265
Metadata
- Authors
- Mahmoud, A. E. D., Stolle, A., & Stelter, M.
- Venue
- ACS Sustainable Chemistry & Engineering
- Publisher
- American Chemical Society (ACS)
- Published
- 2018-03-26
- Volume
- 6
- Issue
- 5
- Pages
- 6358-6369
- ISSN
- 2168-0485 (ISSN-L)
- OpenAlex
- W2797919093
- Cited by
- 189
- References
- 0
- FWCI
- 6.42
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.