CoChat

Bifunctional Electrodeposited 3D NiCoSe2/Nickle Foam Electrocatalysts for Its Applications in Enhanced Oxygen Evolution Reaction and for Hydrazine Oxidation

Akbar, Kamran, Jeon, Jae Ho, Kim, Minsoo, Jeong, Junkyeong, Yi, Yeonjin, Chun, Seung-Hyun · 2018 · ACS Sustainable Chemistry & Engineering
Cited by 128

The DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.

Abstract

The development of stable and efficient oxygen evolutional electrocatalysts is fundamental to the production of hydrogen by water electrolysis. However, so far the majority of electrocatalysts require a substantial overpotential (η) (approximately >250 mV) to catalyze the bottleneck oxygen evolution reaction (OER). To overcome this large overpotential for OER, herein we report the growth of nickel–cobalt–selenide (NiCoSe 2 ) nanosheets over 3D nickel foam (NF) via a facile and scalable electrodeposition method. The resulting 3D NiCoSe 2 /NF hybrid electrode requires an overpotential of merely 183 mV to reach the current density ( J ) of 10 mA cm –2 . To the best of our knowledge, this is the lowest η value reported so far for any earth-abundant material-based OER electrocatalyst to attain the same current density. Moreover, a significant reduction in Tafel slope (88 mV dec –1 ) is observed between bare NF and NiCoSe 2 /NF. Hence, as a result, the 3D hybrid NiCoSe 2 /NF OER electrode outperforms the previously reported electrocatalysts including the expensive state-of-the-art OER electrocatalysts like RuO 2 and IrO 2 . Such enhancement in the OER catalytic efficiency of NiCoSe 2 nanosheets over NF can be attributed to its enormous electrochemical active surface area (ECSA) (108 cm 2 ), large roughness factor (270), highly conductive NF substrate, and the presence of multiple catalytically active OER species (NiOOH and CoOOH) on its surface. In addition, 3D hybrid NiCoSe 2 /NF electrocatalyst was tested for hydrazine oxidation for its bifunctional utilization. Much lower onset potential values (−0.7 V vs SCE) and high current densities (>200 mA cm –2 ) are observed for 3D hybrid NiCoSe 2 /NF when benchmarked against bare NF (−0.4 V and <50 mA cm –2 ). Furthermore, 3D hybrid NiCoSe 2 /NF OER electrode shows excellent stability of 50 h for continuous OER in strongly alkaline solutions while maintaining its enormous ECSA, chemical composition, and structural morphology. The excellent bifunctional electrocatalytic activity, long-term stability, and facile preparation method enable NiCoSe 2 /NF hybrid electrode to be a viable candidate for its widespread use in various water-splitting technologies.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1021/acssuschemeng.8b00644

Cites

6 of 6 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Cited by

See all 128

Metadata

Authors
Akbar, K., Jeon, J. H., Kim, M., Jeong, J., Yi, Y., & Chun, S.-H.
Venue
ACS Sustainable Chemistry & Engineering
Published
2018-05-15
Volume
6
Issue
6
Pages
7735-7742
ISSN
2168-0485 (ISSN-L)
OpenAlex
W2804623847
Cited by
128
References
6
FWCI
2.83
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.