Lithium Extraction and Hydroxysodalite Zeolite Synthesis by Hydrothermal Conversion of α-Spodumene
The DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.
Abstract
The continuously increasing demand for lithium has made it one of the strategic metals, rendering its exploitation of critical importance. Natural α-spodumene is still the primary resource of lithium extraction. The traditional process for the treatment of α-spodumene generates immense quantities of waste residue and needs a high-temperature heat treatment, leading to high energy consumption. In addition to lithium, α-spodumene is rich in aluminum and silicon, and thus it is a potential raw material for zeolite synthesis. Herein, a novel process was developed for the clean and efficient extraction of lithium from α-spodumene coupled with the synthesis of hydroxysodalite zeolite. By hydrothermal alkaline treatment, α-spodumene was converted into hydroxysodalite; the lithium in α-spodumene was released into the solution and subsequently recovered by precipitation with Na 2 CO 3 . A lithium extraction efficiency of 95.8% was obtained under optimum conditions: temperature of 250 °C, NaOH concentration of 600 g/L, liquid/solid ratio of 5:1, stirring speed of 500 rpm, and reaction time of 2 h. In addition, the influences of various factors on the composition and textural properties of the product were analyzed using XRD, SEM, TG, N 2 adsorption/desorption, and FTIR.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Natural zeolites as effective adsorbents in water and wastewater treatment
Wang, S., & Peng, Y. (2010) · Chemical Engineering Journal · doi:10.1016/j.cej.2009.10.029 · Cited by 2,441
Flexer, V., Baspineiro, C. F., & Galli, C. I. (2018) · Science of the Total Environment · doi:10.1016/j.scitotenv.2018.05.223 · Cited by 768
Extraction of lithium with functionalized lithium ion-sieves
Xu, X., Chen, Y., Wan, P., Gasem, K., Wang, K., He, T., Adidharma, H., & Fan, M. (2016) · Progress in Materials Science · doi:10.1016/j.pmatsci.2016.09.004 · Cited by 536
Self-citationChoubey, P. K., Kim, M.-S., Srivastava, R. R., Lee, J.-C., & Lee, J.-Y. (2016) · Minerals Engineering · doi:10.1016/j.mineng.2016.01.010 · Cited by 529
Paranthaman, M. P., Li, L., Luo, J., Hoke, T., Ucar, H., Moyer, B. A., & Harrison, S. (2017) · Environmental Science & Technology · doi:10.1021/acs.est.7b03464 · Cited by 293
Extraction of lithium from β-spodumene using sodium sulfate solution
Kuang, G., Liu, Y., Li, H., Xing, S., Li, F., & Guo, H. (2018) · Hydrometallurgy · doi:10.1016/j.hydromet.2018.02.015 · Cited by 135
Cited by
Recovery of lithium from mineral resources: State-of-the-art and perspectives – A review
Li, H., Eksteen, J., & Kuang, G. (2019) · Hydrometallurgy · doi:10.1016/j.hydromet.2019.105129 · Cited by 256
Tian-ming, G., MNR Key Laboratory of Metallogeny and Mineral Assessment, I. O. M. R. C. A. O. G. S., Na, F., Wu, C., Tao, D., Research Center for Strategy of Global Mineral Resources, C. G. S., China Huanqiu Contracting & Engineering Corp., L. B. B., & SDU Life Cycle Engineering, D. O. G. T. (2023) · China Geology · doi:10.31035/cg2022088 · Cited by 216
Song, Y., Zhao, T., He, L., Zhao, Z., & Liu, X. (2019) · Hydrometallurgy · doi:10.1016/j.hydromet.2019.105141 · Cited by 109
Aspects of Spodumene Lithium Extraction Techniques
Nandihalli, N., Chouhan, R. K., Kuchi, R., & Hlova, I. Z. (2024) · Sustainability · doi:10.3390/su16198513 · Cited by 33
Lithium extraction from β-spodumene: A comparison of keatite and analcime processes
Alhadad, M. F., Oskierski, H. C., Chischi, J., Senanayake, G., & Dlugogorski, B. Z. (2023) · Hydrometallurgy · doi:10.1016/j.hydromet.2022.105985 · Cited by 30
Metadata
- Authors
- Xing, P., Wang, C., Zeng, L., Ma, B., Wang, L., Chen, Y., & Yang, C.
- Venue
- ACS Sustainable Chemistry & Engineering
- Publisher
- American Chemical Society (ACS)
- Published
- 2019-05-06
- Volume
- 7
- Issue
- 10
- Pages
- 9498-9505
- ISSN
- 2168-0485 (ISSN-L)
- OpenAlex
- W2944062183
- Cited by
- 98
- References
- 6
- FWCI
- 5.02
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.