Characterizing Variability in Lignocellulosic Biomass: A Review
The DOI matches its Crossref record; 268 of the 270 references it cites were found in a registry or an index.
Abstract
Feedstock variability is a significant barrier to the scale-up and commercialization of lignocellulosic biofuel technologies. Variability in feedstock characteristics and behavior creates numerous challenges to the biorefining industry by affecting continuous operation and biofuels yields. Currently, feedstock variability is understood and explained largely on the basis of chemical composition. Physical and mechanical properties and behavior of lignocellulosic feedstock in various unit operations, studied through advanced analytical methods, can further explain variability. Such studies will enable us in developing processes and designing equipment to improve operation and conversion performance. In this perspective, we review several advanced analytical methods that measure density, moisture content, thermal properties, flowability, grindability, rheology properties, and micromorphological characteristics. We also discuss the correlations and interactions among these properties that reflect the complexity of lignocellulosic biomass as a feedstock and the associated quality metrics and logistics of supplying consistent quality feedstock to a biorefinery. We also examine methods that have not traditionally been used to characterize lignocellulosic feedstocks but have the potential to bridge the gap in our explanation of feedstock variability.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“several fundamental and technical questions related to the variability in biomass, operating parameters, and efficient catalysis need to be addressed in the hydrothermal processing of biomass into desired products and commercialization of biofuels and bioproducts”
From Hydrothermal carbonization and liquefaction for sustainable production of hydrochar and aromatics (2021) · cites this paper as [34]
Citations
Cites
Items 201–268 of 268
Naimi, L. J., Sokhansanj, S., Bi, X. T., Lim, C. J., Womac, A. R., Lau, A., & Melin, S. (2013) · Applied Engineering in Agriculture · doi:10.13031/2013.42523 · Cited by 37
Engineering and Science of Biomass Feedstock Production and Provision
Shastri, Y., Ting, K. C., Rodríguez, L. F., & Hansen, A. C. (2014) · Springer eBooks · doi:10.1007/978-1-4899-8014-4 · Cited by 37
Two-Dimensional 1H-Nuclear Magnetic Resonance Relaxometry for Understanding Biomass Recalcitrance
Jeoh, T., Karuna, N., Weiss, N. D., & Thygesen, L. G. (2017) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.7b01588 · Cited by 36
Mechanical Conveyors: Selection and Operation
Fayed, M. E., & Skocir, T. S. (1996) · Cited by 36
Drying Characteristics of Forest Biomass Particles of Pinus radiata
Moreno, R. M., Antolín, G., Reyes, A. E., & Alvarez, P. (2004) · Biosystems Engineering · doi:10.1016/j.biosystemseng.2004.02.005 · Cited by 34
Jiang, J., Wang, J., Zhang, X., & Wolcott, M. P. (2017) · Industrial Crops and Products · doi:10.1016/j.indcrop.2017.09.009 · Cited by 33
Akgül, M., Korkut, S., Çamlıbel, O., Candan, Z., & Akbulut, T. (2012) · Maderas Ciencia y tecnología · doi:10.4067/s0718-221x2012000200006 · Cited by 32
Comparison of Methods for the Measurement of the Angle of Repose of Granular Materials
Rousé, P. C. (2013) · Geotechnical Testing Journal · doi:10.1520/gtj20120144 · Cited by 29
González-Sáiz, J. M., Esteban-Dı́ez, I., Sánchez-Gallardo, C., & Pizarro, C. (2008) · Analytical and Bioanalytical Chemistry · doi:10.1007/s00216-008-2186-6 · Cited by 29
Rheometry of coarse biomass at high temperature and pressure
Klingenberg, D. J., Root, T. W., Burlawar, S., Scott, C. T., Bourne, K. J., Gleisner, R., Houtman, C. J., & Subramaniam, V. (2017) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2017.01.031 · Cited by 29
Ignition and volatilization behavior of dust from loblolly pine wood
Hehar, G. S., Fasina, O., Adhikari, S., & Fulton, J. P. (2014) · Fuel Processing Technology · doi:10.1016/j.fuproc.2014.04.036 · Cited by 28
Andrieux, C., Hibert, A., Houari, A.-M., Bensaada, M., Popot, F., & Szylit, O. (1998) · Journal of the Science of Food and Agriculture · doi:10.1002/(sici)1097-0010(199805)77:1<25::aid-jsfa989>3.0.co;2-c · Cited by 28
Lee, K., Roy, S., Cakmak, E., Lacey, J. A., Watkins, T. R., Meyer, H. M., Thompson, V. S., Keiser, J. R., & Qu, J. (2020) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.9b06429 · Cited by 28
Jiang, J., Wang, J., Zhang, X., & Wolcott, M. P. (2016) · RSC Advances · doi:10.1039/c6ra22371k · Cited by 27
Groenewold, G. S., Johnson, K. M., Fox, S. C., Rae, C., Zarzana, C. A., Kersten, B., Rowe, S. M., Westover, T., Gresham, G. L., Emerson, R., et al. (2017) · Energy & Fuels · doi:10.1021/acs.energyfuels.6b02645 · Cited by 27
Self-citationCharrier, A. M., Lereu, A. L., Farahi, R. H., Davison, B. H., & Passian, A. (2018) · Frontiers in Energy Research · doi:10.3389/fenrg.2018.00011 · Cited by 27
Sievers, D. A., Kuhn, E. M., Thompson, V. S., Yancey, N. A., Hoover, A. N., Resch, M. G., & Wolfrum, E. J. (2020) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.9b06550 · Cited by 27
Self-citationBIOMASS MOISTURE RELATIONS OF AN AGRICULTURAL FIELD RESIDUE: CORN STOVER
Womac, A. R., Igathinathane, C., Sokhansanj, S., & Pordesimo, L. O. (2005) · Transactions of the ASAE · doi:10.13031/2013.20084 · Cited by 26
Naimi, L. J., Collard, F., Bi, X. T., Lim, C. J., & Sokhansanj, S. (2016) · Biomass Conversion and Biorefinery · doi:10.1007/s13399-015-0195-1 · Cited by 26
Biomechanics of Wheat/Barley Straw and Corn Stover
Wright, C. T., Pryfogle, P. A., Stevens, N. A., Steffler, E. D., Hess, J. R., & Ulrich, T. H. (2009) · Humana Press eBooks · doi:10.1007/978-1-59259-991-2_2 · Cited by 25
Effects of water content on ball milling pretreatment and the enzymatic digestibility of corn stover
Gu, Y. M., Kim, H., Sang, B., & Lee, J. H. (2018) · Water-Energy Nexus · doi:10.1016/j.wen.2018.07.002 · Cited by 25
Moisture Sorption Characteristics of Corn Stover and Big Bluestem
Karunanithy, C., Muthukumarappan, K., & Donepudi, A. (2013) · Journal of Renewable Energy · doi:10.1155/2013/939504 · Cited by 24
Moisture effect on fluidization behavior of loblolly pine Wood grinds
Olatunde, G., Fasina, O., McDonald, T. P., Adhikari, S., & Duke, S. R. (2016) · Biomass Conversion and Biorefinery · doi:10.1007/s13399-016-0223-9 · Cited by 24
Characterization of surface free energies and surface chemistry of solids
Mittal, K. L. (2003) · CRC Press eBooks · doi:10.1201/9789047403326-19 · Cited by 24
Corn stover thermal decomposition in pyrolytic and oxidant atmosphere
Conesa, J. A., Urueña, A., & Díez, D. (2014) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2014.01.010 · Cited by 22
Fowler, R. T., & Lim, S. C. (1959) · Chemical Engineering Science · doi:10.1016/0009-2509(59)80044-0 · Cited by 22
Leal, J. H., Torres, E. L., Rouse, W. T., Moore, C. M., Sutton, A. D., Hoover, A. N., Li, C., Resch, M. G., Donohoe, B. S., Ray, A. E., et al. (2020) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.9b06759 · Cited by 22
Self-citationSelf-Heating of Agricultural Residues During Storage and Its Impact on Fuel Properties
Tian, X., Zhang, H., & Sheng, C. (2017) · Energy & Fuels · doi:10.1021/acs.energyfuels.7b03167 · Cited by 21
Chemical Structures of Cellulose, Hemicelluloses, and Lignin
Meshitsuka, G., & Isogai, A. (2017) · Routledge eBooks · doi:10.1201/9781315139142-2 · Cited by 20
Gardner, J. L., He, W., Li, C., Wong, J., Sale, K. L., Simmons, B. A., Singh, S., & Tanjore, D. (2015) · RSC Advances · doi:10.1039/c5ra01503k · Cited by 19
Self-citationOginni, O. J., Fasina, O., Adhikari, S., & Fulton, J. (2014) · doi:10.13140/rg.2.1.4752.6643 · Cited by 19
Zhang, R., Cai, Y., Liu, J. J., Zhang, Y., Liu, Y. J., & Wang, X. Z. (2016) · Chemical Engineering Science · doi:10.1016/j.ces.2016.11.029 · Cited by 19
Narani, A., Coffman, P., Gardner, J. L., Li, C., Ray, A. E., Hartley, D. S., Stettler, A., Konda, N. V. S. N. M., Simmons, B. A., Pray, T. R., et al. (2017) · Bioresource Technology · doi:10.1016/j.biortech.2017.06.156 · Cited by 19
Self-citationIgathinathane, C., Davis, J. D., PURSWELL, J. L., & Columbus, E. P. (2010) · Bioresource Technology · doi:10.1016/j.biortech.2009.12.140 · Cited by 18
Relationships between surface energy analysis and functional characteristics of dairy powders
Kondor, A., & Hogan, S. A. (2017) · Food Chemistry · doi:10.1016/j.foodchem.2017.06.036 · Cited by 18
Yan, J., Liang, L., He, Q., Li, C., Xu, F., Sun, J., Goh, E.-B., Konda, N. V. S. N. M., Beller, H. R., Simmons, B. A., et al. (2019) · ChemSusChem · doi:10.1002/cssc.201901084 · Cited by 18
Self-citationWoody biomass size reduction with selective material orientation
Dooley, J. H., Lanning, D. N., & Lanning, C. J. (2012) · Biofuels · doi:10.4155/bfs.12.72 · Cited by 17
Pattathil, S., Ingwers, M. W., Victoriano, O. L., Kandemkavil, S., McGuire, M. A., Teskey, R. O., & Aubrey, D. P. (2016) · Frontiers in Plant Science · doi:10.3389/fpls.2016.00882 · Cited by 16
The effect of storage time and moisture content on grindability of loblolly pine (Pinus taeda L.)
Oyedeji, O. A., Fasina, O., Adhikari, S., McDonald, T. P., & Taylor, S. (2016) · European Journal of Wood and Wood Products · doi:10.1007/s00107-016-1070-x · Cited by 16
Self-citationGroenewold, G. S., Hodges, B. D. M., Hoover, A. N., Li, C., Zarzana, C. A., Rigg, K. W., & Ray, A. E. (2019) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.9b06524 · Cited by 16
Self-citationThe influence of the cohesion coefficient (C) on the flowability of different sorbitol types
Szalay, A., Kelemen, A., & Pintye‐Hódi, K. (2014) · Process Safety and Environmental Protection · doi:10.1016/j.cherd.2014.05.008 · Cited by 15
Effect of high pressure processing on sugar-snap cookie dough preservation and cookie quality
Aguirre, A., Karwe, M. V., & Borneo, R. (2017) · Journal of Food Processing and Preservation · doi:10.1111/jfpp.13407 · Cited by 15
Bitra, V. S. P., Womac, A. R., Igathinathane, C., & Sokhansanj, S. (2010) · Transactions of the ASABE · doi:10.13031/2013.34886 · Cited by 14
Vaezi, M., & Kumar, A. (2015) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2015.06.001 · Cited by 14
Pieniazek, F., & Messina, V. (2016) · Microscopy Research and Technique · doi:10.1002/jemt.22626 · Cited by 14
Impact of drying-grinding sequence on loblolly pine chips preprocessing effectiveness
Oyedeji, O. A., & Fasina, O. (2016) · Industrial Crops and Products · doi:10.1016/j.indcrop.2016.11.028 · Cited by 14
Self-citationPiselli, A., Basso, M., Simonato, M., Furlanetto, R., Cigada, A., Nardo, L. D., & Curto, B. D. (2017) · Wear · doi:10.1016/j.wear.2017.09.003 · Cited by 14
Thyrel, M., Aulin, R., & Lestander, T. A. (2019) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2018.12.018 · Cited by 14
Surface energy of air fractionated corn stover
Leal, J. H., Moore, C. M., Sutton, A. D., & Semelsberger, T. A. (2019) · Industrial Crops and Products · doi:10.1016/j.indcrop.2019.05.046 · Cited by 14
Self-citationInfluence of Bark on the Physical and Thermal Decomposition Properties of Short-Rotation Eucalyptus
Gonçalves, B. C. M., Till, D., Fasina, O., Tamang, B., & Gallagher, T. V. (2015) · BioEnergy Research · doi:10.1007/s12155-015-9606-1 · Cited by 13
Oginni, O. J., & Fasina, O. (2018) · Industrial Crops and Products · doi:10.1016/j.indcrop.2018.07.005 · Cited by 13
PARTICULATE CHARACTERIZATION: INVERSE GAS CHROMATOGRAPHY
Butler, D. A., & Williams, D. R. (2000) · Encyclopedia of Separation Science · doi:10.1016/b0-12-226770-2/07451-2 · Cited by 12
Bending properties of loblolly pine
Oyedeji, O. A., Young, A., & Fasina, O. (2017) · Industrial Crops and Products · doi:10.1016/j.indcrop.2017.09.060 · Cited by 12
Self-citationYan, J., Kiemle, D. J., & Liu, S. (2014) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2014.10.031 · Cited by 11
Self-citationPhysical Properties and Pyrolysis Behavior of Fractionated Poultry Litter
Bernhart, M., & Fasina, O. (2009) · Transactions of the ASABE · doi:10.13031/2013.26810 · Cited by 11
Test Method for Bulk Density of Densified Particulate Biomass Fuels
E48 Committee (2019) · doi:10.1520/e0873-82r19 · Cited by 11
Banks, S. (2014) · Aston Publications Explorer (Aston University) · doi:10.48780/publications.aston.ac.uk.00023181 · Cited by 10
Effect of Harvesting Time and Moisture Content on Energy Consumption of Compressing Switchgrass
Kemmerer, B. D., & Liu, J. (2014) · American Journal of Plant Sciences · doi:10.4236/ajps.2014.521338 · Cited by 9
A Study on the Impact of Wood Species on Grinding Performance
Naimi, L. J., Sokhansanj, S., Bi, X. T., Lim, C. J., & Melin, S. (2012) · 2012 Dallas, Texas, July 29 - August 1, 2012 · doi:10.13031/2013.42268 · Cited by 8
Image and Sieve Analysis of Biomass Particle Sizes and Separation after Size Reduction
Yang, Y. T. (2007) · Cited by 7
Coffman, P., McCaffrey, N., Gardner, J. L., Bhagia, S., Kumar, R., Wyman, C. E., & Tanjore, D. (2018) · Frontiers in Energy Research · doi:10.3389/fenrg.2018.00053 · Cited by 7
Self-citationWestover, T., & Emerson, R. (2015) · Industrial Biotechnology · doi:10.1089/ind.2015.0019 · Cited by 6
Disintegration, Agglomeration, and Size Separation of Particulate Solids
Couper, J. R., Penney, W. R., Fair, J. R., & Walas, S. M. (2012) · Elsevier eBooks · doi:10.1016/b978-0-12-396959-0.00012-4 · Cited by 5
Fasina, O. (2010) · Transactions of the ASABE · doi:10.13031/2013.32579 · Cited by 4
Chapter 16. Lignin Visualization: Advanced Microscopy Techniques for Lignin Characterization
Zeng, Y., & Donohoe, B. S. (2018) · RSC energy and environment series · doi:10.1039/9781788010351-00477 · Cited by 3
Self-citationParticle and feeding characteristics of biomass powders
Falk, J. (2013) · KTH Publication Database DiVA (KTH Royal Institute of Technology) · Cited by 2
Flow mechanics of switchgrass bulk solid in hoppers under gravity discharge
Ogden, C. A. (2010) · Purdue e-Pubs (Purdue University System) · Cited by 2
Test Methods for Apparent Density, Bulk Factor, and Pourability of Plastic Materials
D20 Committee (1996) · doi:10.1520/d1895-96 · Cited by 2
Research works printed but not linked: 15
- Hegedus C. R., 1993, J. Coat. Technol. Res., 65, na
- 10.1007/978-1-4899-8014-4_2p 17-35 · doi:10.1007/978-1-4899-8014-4_2p
- 10.5849/sjaf.11-046pp · doi:10.5849/sjaf.11-046pp
- Fisher K., 1935, Angew. Chem., na
- 10.13031/2013.41661 · doi:10.13031/2013.41661
- 10.1007/s00397-009-0382-8 · DOI · Paper page
- Dalpke B., 2005, J. Pulp Pap. Sci., 31, 39
- Harmsen, P.; Huijgen, W.; Bermudez, L.; Bakker, R.; López, L.; Bakker, R. Literature Review of Physical and Chemical Pretreatment Processes for Lignocellulosic Biomass ; Wageningen UR Food & Biobased Research, 2010.
- 10.1016/B0-12-226770-2/07451-2 · DOI
- Mohanaiah P., 2013, Int. J. Sci. Res. Publ., 3, na
- Jenike, A. W. Storage and Flow of Solids ; Bulletin No. 123; University of Utah: Salt Lake City, UT, 1976.
- 10.1016/j.indcrop.2016.11.028 · DOI
- 1991, British Standard BS 2955: Glossary of Terms Relating to Particle Technology
- Hrncırová M., 2013, J. Eng. Mech., 20, 309
- 10.1002/(SICI)1097-0010(199805)77:1<38::AID-JSFA999>3.0.CO;2-5 · DOI · Paper page
Cited by
Zhou, Z., Liu, D., & Zhao, X. (2021) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2021.111169 · Cited by 343
Catalyst Deactivation and Its Mitigation during Catalytic Conversions of Biomass
Lin, F., Xu, M., Ramasamy, K. K., Li, Z., Klinger, J. L., Schaidle, J. A., & Wang, H. (2022) · ACS Catalysis · doi:10.1021/acscatal.2c02074 · Cited by 200
Technical challenges in scaling up the microwave technology for biomass processing
Siddique, I. J., Salema, A. A., Antunes, E., & Vinu, R. (2022) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2021.111767 · Cited by 189
Hydrothermal carbonization and liquefaction for sustainable production of hydrochar and aromatics
Cao, Y., He, M., Dutta, S., Luo, G., Zhang, S., & Tsang, D. C. W. (2021) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2021.111722 · Cited by 175
Sher, F., Hameed, S., Smječanin, N., Chupin, A., Hai, I. U., Wang, B., Teoh, Y. H., & Yildiz, M. J. (2024) · Energy Conversion and Management · doi:10.1016/j.enconman.2024.119213 · Cited by 175
Metadata
- Authors
- Yan, J., Oyedeji, O., Leal, J. H., Donohoe, B. S., Semelsberger, T. A., Li, C., Hoover, A. N., Webb, E., Bose, E. A., Zeng, Y., Williams, C. L., Schaller, K. D., Sun, N., Ray, A. E., & Tanjore, D.
- Affiliations
- Lawrence Berkeley National Laboratory (US)
- Oak Ridge National Laboratory (US)
- Los Alamos National Laboratory (US)
- National Laboratory of the Rockies (US)
- Idaho National Laboratory (US)
- Corresponding author
- Ray, Allison E.
- Tanjore, Deepti
- ORCID
- Venue
- ACS Sustainable Chemistry & Engineering
- Publisher
- American Chemical Society (ACS)
- Published
- 2020-05-04
- Volume
- 8
- Issue
- 22
- Pages
- 8059-8085
- ISSN
- 2168-0485 (ISSN-L)
- OpenAlex
- W3022352571
- Cited by
- 134
- References
- 270
- Citations by year
- 2026: 35 · 2025: 23 · 2024: 23 · 2023: 20 · 2022: 14 · 2021: 16 · 2020: 3
- FWCI
- 4.17
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- Locations
- ACS Sustainable Chemistry & Engineering (publishedVersion)
- eScholarship (California Digital Library) (submittedVersion)
- OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) (submittedVersion)
- Funders
- U.S. Department of Energy (DE-AC07-05ID14517, DE-AC36-08GO28308)
- Topics
- Physical Sciences › Engineering › Biomedical Engineering › Biofuel production and bioconversion
- Physical Sciences › Energy › Fuel Technology › Thermochemical Biomass Conversion Processes
- Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › Forest Biomass Utilization and Management
- Keywords
- lignocellulosic biomass, feedstock variability, lignocellulosic biofuels, biorefinery, feedstock characterization, density, moisture content, thermal properties, flowability, grindability, rheology, micromorphology, feedstock logistics
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.