The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
In Situ Thermal Preparation of Polyimide Nanocomposite Films Containing Functionalized Graphene Sheets
Abstract
Graphene oxides (GO) were exfoliated in N,N-dimethylformamide by simple sonication treatment of the as-prepared high quality graphite oxides. By high-speed mixing of the pristine poly(amic acid) (PAA) solution with graphene oxide suspension, PAA solutions containing uniformly dispersed GO can be obtained. Polyimide (PI) nanocomposite films with different loadings of functionalized graphene sheets (FGS) can be prepared by in situ partial reduction and imidization of the as-prepared GO/PAA composites. Transmission electron microscopy observations showed that the FGS were well exfoliated and uniformly dispersed in the PI matrix. It is interesting to find that the FGS were highly aligned along the surface direction for the nanocomposite film with 2 wt % FGS. Tensile tests indicated that the mechanical properties of polyimide were significantly enhanced by the incorporation of FGS, due to the fine dispersion of high specific surface area of functionalized graphene nanosheets and the good adhesion and interlocking between the FGS and the matrix.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Studies on thermal and mechanical properties of polyimide–clay nanocomposites
Agag, T., Koga, T., & Takeichi, T. (2001) · Polymer · doi:10.1016/s0032-3861(00)00824-7 · Cited by 599
Cited by
Graphene-based polymer nanocomposites
Potts, J. R., Dreyer, D. R., Bielawski, C. W., & Ruoff, R. S. (2011) · Polymer · doi:10.1016/j.polymer.2010.11.042 · Cited by 3,123
Prateek, Thakur, V. K., & Gupta, R. K. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00495 · Cited by 1,659
Nanoparticle decoration with surfactants: Molecular interactions, assembly, and applications
Heinz, H., Pramanik, C., Heinz, O., Ding, Y., Mishra, R. K., Marchon, D., Flatt, R. J., Estrela-Lopis, I., Llop, J., Moya, S., et al. (2017) · Surface Science Reports · doi:10.1016/j.surfrep.2017.02.001 · Cited by 608
El Achaby, M., Arrakhiz, F. Z., Vaudreuil, S., Essassi, E. M., & Qaiss, A. (2012) · Applied Surface Science · doi:10.1016/j.apsusc.2012.04.118 · Cited by 427
Wang, J.-Y., Yang, S.-Y., Huang, Y.-L., Tien, H.-W., Chin, W.-K., & Ma, C.-C. M. (2011) · Journal of Materials Chemistry · doi:10.1039/c1jm11766a · Cited by 288
Metadata
- Authors
- Chen, D., Zhu, H., & Liu, T.
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2010-11-10
- Volume
- 2
- Issue
- 12
- Pages
- 3702-3708
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W2021019452
- Cited by
- 229
- References
- 1
- FWCI
- 14.13
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: In Situ Thermal Preparation of Polyimide Nanocomposite Films Containing Functionalized Graphene Sheets. https://app.cochat.ai/papers/10.1021/am1008437
- The paper
- Chen, D., Zhu, H., & Liu, T. (2010). In Situ Thermal Preparation of Polyimide Nanocomposite Films Containing Functionalized Graphene Sheets. ACS Applied Materials & Interfaces. https://doi.org/10.1021/am1008437
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.