The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Hierarchical Nanostructures of Copper(II) Phthalocyanine on Electrospun TiO2 Nanofibers: Controllable Solvothermal-Fabrication and Enhanced Visible Photocatalytic Properties
Abstract
In the present work, 2,9,16,23-tetranitrophthalocyanine copper(II) (TNCuPc)/TiO(2) hierarchical nanostructures were successfully fabricated by a simple combination method of electrospinning technique and solvothermal processing. Scanning electron microscopy (SEM), energy-dispersive X-ray (EDX) spectroscopy, X-ray diffraction (XRD), UV-vis diffuse reflectance (DR), Fourier transform infrared spectrum (FT-IR), X-ray photoelectron spectroscopy (XPS), and thermal gravimetric and differential thermal analysis (TG-DTA) were used to characterize the as-synthesized TNCuPc/TiO(2) hierarchical nanostructures. The results showed that the secondary TNCuPc nanostructures were not only successfully grown on the primary TiO(2) nanofibers substrates but also uniformly distributed without aggregation. By adjusting the solvothermal fabrication parameters, the TNCuPc nanowires or nanoflowers were facilely fabricated, and also the loading amounts of TNCuPc could be controlled on the TNCuPc/TiO(2) hierarchical nanostructural nanofibers. And, there might exist the interaction between TNCuPc and TiO(2). A possible mechanism for the formation of TNCuPc/TiO(2) hierarchical nanostructures was suggested. The photocatalytic studies revealed that the TNCuPc/TiO(2) hierarchical nanostructures exhibited enhanced photocatalytic efficiency of photodegradation of Rhodamine B (RB) compared with the pure TNCuPc or TiO(2) nanofibers under visible-light irradiation.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Photocatalysis on TiO2 Surfaces: Principles, Mechanisms, and Selected Results
Linsebigler, A. L., Lu, G., & Yates, J. T. (1995) · Chemical Reviews · doi:10.1021/cr00035a013 · Cited by 11,575
Cited by
Electrospinning: designed architectures for energy conversion and storage devices
Cavaliere, S., Subianto, S., Savych, I., Jones, D. J., & Rozière, J. (2011) · Energy & Environmental Science · doi:10.1039/c1ee02201f · Cited by 702
Lu, X., Wang, C., Favier, F., & Pinna, N. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201601301 · Cited by 429
Enabling Silicon for Solar-Fuel Production
Sun, K., Shen, S., Liang, Y., Burrows, P. E., Mao, S. S., & Wang, D. (2014) · Chemical Reviews · doi:10.1021/cr300459q · Cited by 393
Zhang, Z., Wang, Z., Cao, S.-W., & Xue, C. (2013) · The Journal of Physical Chemistry C · doi:10.1021/jp409311x · Cited by 295
Self-citationZhang, Z., Shao, C., Sun, Y., Mu, J., Zhang, M., Zhang, P., Guo, Z., Liang, P., Wang, C., & Liu, Y. (2012) · J. Mater. Chem. · doi:10.1039/c1jm13421c · Cited by 270
Self-citation
Metadata
- Authors
- Zhang, M., Shao, C., Guo, Z., Zhang, Z., Mu, J., Cao, T., & Liu, Y.
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2011-01-10
- Volume
- 3
- Issue
- 2
- Pages
- 369-377
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W2319782099
- Cited by
- 205
- References
- 1
- FWCI
- 7.88
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.