The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Charge Injection Engineering of Ambipolar Field-Effect Transistors for High-Performance Organic Complementary Circuits
Abstract
Ambipolar π-conjugated polymers may provide inexpensive large-area manufacturing of complementary integrated circuits (CICs) without requiring micro-patterning of the individual p- and n-channel semiconductors. However, current-generation ambipolar semiconductor-based CICs suffer from higher static power consumption, low operation frequencies, and degraded noise margins compared to complementary logics based on unipolar p- and n-channel organic field-effect transistors (OFETs). Here, we demonstrate a simple methodology to control charge injection and transport in ambipolar OFETs via engineering of the electrical contacts. Solution-processed caesium (Cs) salts, as electron-injection and hole-blocking layers at the interface between semiconductors and charge injection electrodes, significantly decrease the gold (Au) work function (∼4.1 eV) compared to that of a pristine Au electrode (∼4.7 eV). By controlling the electrode surface chemistry, excellent p-channel (hole mobility ∼0.1-0.6 cm(2)/(Vs)) and n-channel (electron mobility ∼0.1-0.3 cm(2)/(Vs)) OFET characteristics with the same semiconductor are demonstrated. Most importantly, in these OFETs the counterpart charge carrier currents are highly suppressed for depletion mode operation (I(off) < 70 nA when I(on) > 0.1-0.2 mA). Thus, high-performance, truly complementary inverters (high gain >50 and high noise margin >75% of ideal value) and ring oscillators (oscillation frequency ∼12 kHz) based on a solution-processed ambipolar polymer are demonstrated.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Physics of Semiconductor Devices
Sze, S. M., & Ng, K. K. (2006) · doi:10.1002/0470068329 · Cited by 14,627
Flexible organic transistors and circuits with extreme bending stability
Sekitani, T., Zschieschang, U., Klauk, H., & Someya, T. (2010) · Nature Materials · doi:10.1038/nmat2896 · Cited by 1,253
Cited by
Imide- and Amide-Functionalized Polymer Semiconductors
Guo, X., Facchetti, A., & Marks, T. J. (2014) · Chemical Reviews · doi:10.1021/cr500225d · Cited by 1,035
Self-citation25th Anniversary Article: Recent Advances in n‐Type and Ambipolar Organic Field‐Effect Transistors
Zhao, Y., Guo, Y., & Liu, Y. (2013) · Advanced Materials · doi:10.1002/adma.201302315 · Cited by 682
Toward Printed Integrated Circuits based on Unipolar or Ambipolar Polymer Semiconductors
Baeg, K., Caironi, M., & Noh, Y. (2013) · Advanced Materials · doi:10.1002/adma.201205361 · Cited by 522
Self-citationContact engineering in organic field-effect transistors
Liu, C., Xu, Y., & Noh, Y.-Y. (2015) · Materials Today · doi:10.1016/j.mattod.2014.08.037 · Cited by 520
Self-citationA Fluorinated Phenylene Unit as a Building Block for High‐Performance n‐Type Semiconducting Polymer
Park, J. H., Jung, E. H., Jung, J. W., & Jo, W. H. (2013) · Advanced Materials · doi:10.1002/adma.201205320 · Cited by 273
Metadata
- Authors
- Baeg, K.-J., Kim, J., Khim, D., Caironi, M., Kim, D.-Y., You, I.-K., Quinn, J. R., Facchetti, A., & Noh, Y.-Y.
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2011-08-01
- Volume
- 3
- Issue
- 8
- Pages
- 3205-3214
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W2020565670
- Cited by
- 160
- References
- 2
- FWCI
- 14.93
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Charge Injection Engineering of Ambipolar Field-Effect Transistors for High-Performance Organic Complementary Circuits. https://app.cochat.ai/papers/10.1021/am200705j
- The paper
- Baeg, K.-J., Kim, J., Khim, D., Caironi, M., Kim, D.-Y., You, I.-K., Quinn, J. R., Facchetti, A., & Noh, Y.-Y. (2011). Charge Injection Engineering of Ambipolar Field-Effect Transistors for High-Performance Organic Complementary Circuits. ACS Applied Materials & Interfaces. https://doi.org/10.1021/am200705j
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.