The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Facile Synthesis of BaTiO3 Nanotubes and Their Microwave Absorption Properties
Abstract
Uniform BaTiO(3) nanotubes were synthesized via a simple wet chemical route at low temperature (50 °C). The as-synthesized BaTiO(3) nanotubes were characterized using powder X-ray diffraction, field-emission scanning electron microscopy, transmission electron microscopy, Raman spectroscopy, and X-ray photoelectron spectroscopy. The results show that the BaTiO(3) nanotubes formed a cubic phase with an average diameter of ~10 nm and wall thickness of 3 nm at room temperature. The composition of the mixed solvent (ethanol and deionized water) was a key factor in the formation of these nanotubes; we discuss possible synthetic mechanisms. The microwave absorption properties of the BaTiO(3) nanotubes were studied at microwave frequencies between 0.5 and 15 GHz. The minimum reflection loss of the BaTiO(3) nanotubes/paraffin wax composite (BaTiO(3) nanotubes weight fraction = 70%) reached 21.8 dB (~99.99% absorption) at 15 GHz, and the frequency bandwidth less than -10 dB is from 13.3 to 15 GHz. The excellent absorption property of BaTiO(3) nanotubes at high frequency indicates that these nanotubes could be promising microwave-absorbing materials.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Colloidal nanocrystal synthesis and the organic–inorganic interface
Yin, Y., & Alivisatos, A. P. (2005) · Nature · doi:10.1038/nature04165 · Cited by 3,273
Cited by
Wu, J., Xiao, D., & Zhu, J. (2015) · Chemical Reviews · doi:10.1021/cr5006809 · Cited by 1,608
Wu, Z., Pei, K., Xing, L., Yu, X., You, W., & Che, R. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201901448 · Cited by 817
Pan, Z., Yao, L., Zhai, J., Fu, D., Shen, B., & Wang, H. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b13663 · Cited by 267
Metadata
- Authors
- Zhu, Y.-F., Zhang, L., Natsuki, T., Fu, Y.-Q., & Ni, Q.-Q.
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2012-03-21
- Volume
- 4
- Issue
- 4
- Pages
- 2101-2106
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W2428639288
- Cited by
- 180
- References
- 1
- FWCI
- 5.22
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
