The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
3D Graphene Foam as a Monolithic and Macroporous Carbon Electrode for Electrochemical Sensing
Abstract
Graphene, a single-atom-thick monolayer of sp(2) carbon atoms perfectly arranged in a honeycomb lattice, is an emerging sensing material because of its extraordinary properties, such as exceptionally high specific surface area, electrical conductivity, and electrochemical potential window. In this study, we demonstrate that three-dimensional (3D), macroporous, highly conductive, and monolithic graphene foam synthesized by chemical vapor deposition represents a novel architecture for electrochemical electrodes. Being employed as an electrochemical sensor for detection of dopamine, 3D graphene electrode exhibits remarkable sensitivity (619.6 μA mM(-1) cm(-2)) and lower detection limit (25 nM at a signal-to-noise ratio of 5.6), with linear response up to ∼25 μM. And the oxidation peak of dopamine can be easily distinguished from that of uric acid - a common interferent to dopamine detection. We envision that the graphene foam provides a promising platform for the development of electrochemical sensors as well as other applications, such as energy storage and conversion.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A Comprehensive Review of Glucose Biosensors Based on Nanostructured Metal-Oxides
Rahman, M. M., Ahammad, A. J. S., Jin, J.-H., Ahn, S. J., & Lee, J.-J. (2010) · Sensors · doi:10.3390/s100504855 · Cited by 762
Cited by
Electrochemistry of Graphene and Related Materials
Ambrosi, A., Chua, C. K., Bonanni, A., & Pumera, M. (2014) · Chemical Reviews · doi:10.1021/cr500023c · Cited by 1,208
Nardecchia, S., Carriazo, D., Ferrer, M. L., Gutiérrez, M. C., & del Monte, F. (2013) · Chem. Soc. Rev. · doi:10.1039/c2cs35353a · Cited by 1,153
Chabot, V., Higgins, D., Yu, A., Xiao, X., Chen, Z., & Zhang, J. (2014) · Energy & Environmental Science · doi:10.1039/c3ee43385d · Cited by 1,119
Conductive Polymers: Opportunities and Challenges in Biomedical Applications
Nezakati, T., Seifalian, A., Tan, A., & Seifalian, A. M. (2018) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00275 · Cited by 977
Design of advanced porous graphene materials: from graphene nanomesh to 3D architectures
Jiang, L., & Fan, Z. (2014) · Nanoscale · doi:10.1039/c3nr04555b · Cited by 686
Metadata
- Authors
- Dong, X., Wang, X., Wang, L., Song, H., Zhang, H., Huang, W., & Chen, P.
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2012-05-21
- Volume
- 4
- Issue
- 6
- Pages
- 3129-3133
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W1989260522
- Cited by
- 320
- References
- 1
- FWCI
- 18.92
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.