The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Effect of Chemical Modification of Graphene on Mechanical, Electrical, and Thermal Properties of Polyimide/Graphene Nanocomposites
Abstract
Chemically modified graphene sheets were dispersed in a high-performance polyimide (PI) matrix using polyamic acid (PAA)/graphene nanocomposite as a precursor. PI nanocomposite films with different loadings of graphene sheets were prepared by thermal imidization of the as-prepared PAA/graphene nanocomposites. Graphene oxide (GO) synthesized by Hummer's method was chemically reduced with various reducing agents to produce reduced GOs (rGOs). The incorporation of only 5 wt% GO resulted in an ~12-fold and ~18-fold increase in the tensile strength and tensile modulus of PI, respectively, while the PI/rGO nanocomposites were found to have relatively inferior tensile properties. The superior mechanical properties of the PI/GO nanocomposites were attributed to the good dispersion and effective stress transfer between the polymer and GO sheets, as evidenced by the results from X-ray diffraction (XRD) and morphological studies. Furthermore, the PI/GO nanocomposites exhibited higher loading capacity than PI/rGO. The thermo-oxidative stability of PI was also remarkably improved with the addition of both GO and rGOs, but rGOs had a more pronounced effect. The electrical conductivity of PI/rGO nanocomposites was higher than that of PI/GO, suggesting restoration of the graphene basal plane upon the reduction of GO. The highest electrical conductivity was achieved for the l-ascorbic acid reduced GO-reinforced PI nanocomposites.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Superior Thermal Conductivity of Single-Layer Graphene
Balandin, A. A., Ghosh, S., Bao, W., Calizo, I., Teweldebrhan, D., Miao, F., & Lau, C. N. (2008) · Nano Letters · doi:10.1021/nl0731872 · Cited by 13,823
The chemistry of graphene oxide
Dreyer, D. R., Park, S., Bielawski, C. W., & Ruoff, R. S. (2010) · Chem. Soc. Rev. · doi:10.1039/b917103g · Cited by 11,653
Self-citation
Cited by
Mechanical properties of graphene and graphene-based nanocomposites
Papageorgiou, D. G., Kinloch, I. A., & Young, R. J. (2017) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.07.004 · Cited by 2,579
Graphene-polymer nanocomposites for structural and functional applications
Hu, K., Kulkarni, D. D., Choi, I., & Tsukruk, V. V. (2014) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2014.03.001 · Cited by 1,085
Guo, Y., Xu, G., Yang, X., Ruan, K., Ma, T., Zhang, Q., Gu, J., Wu, Y., Liu, H., & Guo, Z. (2018) · Journal of Materials Chemistry C · doi:10.1039/c8tc00452h · Cited by 416
Electrical percolation in graphene–polymer composites
Marsden, A. J., Papageorgiou, D. G., Vallés, C., Liscio, A., Palermo, V, Bissett, M. A., Young, R. J., & Kinloch, I. A. (2018) · 2D Materials · doi:10.1088/2053-1583/aac055 · Cited by 396
Zhang, F., Feng, Y., Qin, M., Gao, L., Li, Z., Zhao, F., Zhang, Z., Lv, F., & Feng, W. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201901383 · Cited by 308
Metadata
- Authors
- Ha, H. W., Choudhury, A., Kamal, T., Kim, D.-H., & Park, S.-Y.
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2012-09-04
- Volume
- 4
- Issue
- 9
- Pages
- 4623-4630
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W2317318392
- Cited by
- 194
- References
- 2
- FWCI
- 11.32
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Effect of Chemical Modification of Graphene on Mechanical, Electrical, and Thermal Properties of Polyimide/Graphene Nanocomposites. https://app.cochat.ai/papers/10.1021/am300999g
- The paper
- Ha, H. W., Choudhury, A., Kamal, T., Kim, D.-H., & Park, S.-Y. (2012). Effect of Chemical Modification of Graphene on Mechanical, Electrical, and Thermal Properties of Polyimide/Graphene Nanocomposites. ACS Applied Materials & Interfaces. https://doi.org/10.1021/am300999g
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.