The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Phosphonate- and Carboxylate-Based Self-Assembled Monolayers for Organic Devices: A Theoretical Study of Surface Binding on Aluminum Oxide with Experimental Support
Abstract
We report a computational study on the chemical bonding of phosphonates and carboxylates to aluminum oxide surfaces and how the binding properties are related to the amount of water in the experimental environment. Two different surface structures were used in the calculations in order to model representative adsorption sites for the phosphonates and carboxylates and to account for the amorphous nature of the hydroxylated AlOx films in experiment. For the phosphonates, we find that the thermodynamically preferred binding mode changes between mono-, bi-, and tridentate depending on the surface structure and the amount of residual water. For the carboxylates, on the other hand, monodentate adsorption is always lower in energy at all experimental conditions. Phosphonates are more strongly bound to aluminum oxide than carboxylates, so that carboxylates can be replaced easily by phosphonates. The theoretical findings are consistent with those obtained in adsorption, desorption, and exchange reactions of n-alkyl phosphonic and carboxylic acids on AlOx surfaces. The results provide an atomistic understanding of the adsorption and help to optimize experimental conditions for self-assembly of organic films on aluminum oxide surfaces.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Flexible organic transistors and circuits with extreme bending stability
Sekitani, T., Zschieschang, U., Klauk, H., & Someya, T. (2010) · Nature Materials · doi:10.1038/nmat2896 · Cited by 1,253
Organic Nonvolatile Memory Transistors for Flexible Sensor Arrays
Sekitani, T., Yokota, T., Zschieschang, U., Klauk, H., Bauer, S., Takeuchi, K., Takamiya, M., Sakurai, T., & Someya, T. (2009) · Science · doi:10.1126/science.1179963 · Cited by 962
Cited by
Covalent Surface Modification of Oxide Surfaces
Pujari, S. P., Scheres, L., Marcelis, A. T. M., & Zuilhof, H. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201306709 · Cited by 934
Li, M., Liu, M., Qi, F., Lin, F. R., & Jen, A. K.-Y. (2024) · Chemical Reviews · doi:10.1021/acs.chemrev.3c00396 · Cited by 642
Long, J., Zhong, M., Zhang, H., & Fan, P. (2015) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2014.11.015 · Cited by 499
Organic Hole‐Transport Layers for Efficient, Stable, and Scalable Inverted Perovskite Solar Cells
Yao, Y., Cheng, C., Zhang, C., Hu, H., Wang, K., & De Wolf, S. (2022) · Advanced Materials · doi:10.1002/adma.202203794 · Cited by 363
The Promise and Challenges of Inverted Perovskite Solar Cells
Chen, P., Xiao, Y., Li, S., Jia, X., Luo, D., Zhang, W., Snaith, H. J., Gong, Q., & Zhu, R. (2024) · Chemical Reviews · doi:10.1021/acs.chemrev.4c00073 · Cited by 297
Metadata
- Authors
- Bauer, T., Schmaltz, T., Lenz, T., Halik, M., Meyer, B., & Clark, T.
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2013-06-18
- Volume
- 5
- Issue
- 13
- Pages
- 6073-6080
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W2024592928
- Cited by
- 166
- References
- 2
- FWCI
- 6.59
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.